etrailer Trailer Suspension - Leaf Spring Suspension - APS6SE Review Video

The Malone Hanger Spare Tire Bike Rack for 3 Bikes #MPG2147 will fit on the 255/70R18 spare tire at the back of your 2021 Ford Bronco. The Malone rack is designed to fit 8" to 10-1/2" wide tires and your tire is 10" wide so it will…

Based on the measurements you have given, the correct kit would be the #K71-657-00 Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Triple Axle - 8,000 lbs. You want to use the short equalizers. The hangers you have are designed for the…

The thickness of the tube is not any different as they are both 3 inch diameter, and the spindles are also the same utilizing the same inner diameter bearings, hubs, and seals. The difference in capacity is in the custom bend in the axle that creates…

I can confirm that the correct part for you is the Replacement Lippert Components Correct Track Weld-On Axle Hanger #LC303918. When I reached out to Lippert they told me this hanger measured exactly 4.93 inches long x 3 inches wide x 3.3 inches.

If everything is still in good shape there's no need to replace it. The springs sometimes last a very long time. But if you wore out the rubber rin the EZ Flex it's time for a new kit as the rubber is not replaceable. Based on your trailers…

The recommended amount of tire clearance to allow for suspension travel on virtually any trailer is 3" from the top of the tire to the bottom of the fender or frame and 1" from the inside of the tire to the frame. If you need to raise the…

As you may have already found, 5200 lb, 6000 lb and 7000 lb axles can all use the same components including inner/outer bearings, hubs and brakes. Here are some other things they share in common: Dexter 5200 lb Regular Duty Axle - 0.180 inch tube…

To get your Dexter E-Z Flex Equalizer lower so the tires on your 2-17 Nitro Z19 boat trailer are not hitting the fenders I recommend having taller center hangers installed. Base on the pictures you provided it looks like your current hangers are…

In order to put a heavier suspension on your trailer you will need an axle, leaf springs, hangers, spring seats (if you need to move them), suspension bolts, U-bolts/U-bolt plates, and shackle straps (if you want a double-eye leaf spring). You will…

The front hangers in kit #APS6SE are #721584. They measure 3-3/4 inches from the top to the center of the mounting hole. The hole is 9/16 inches in diameter. The holes that are in the top are not for bolting the hanger. They are there to mount the…

A bushing is not required for the c-hook end (sometimes called an open eye end) of a slipper spring like the 4-Leaf Slipper Spring w/ Open Eye End #e33SR. The closed eye of this spring does have a bushing included; I have added a link to a video…

A Nylon Bushing #TRBU11561 is not required to be used on the open end of the 4-Leaf Slipper Spring #e33SR. Since the bushing is not going to be fully encased it stands that under the weight of the trailer it will fail and break apart more easily. I…