Dexter Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 5" Front, 6-3/8" Rear

Video Transcript for Review of Dexter Trailer Leaf Spring Suspension - Hangers - Suspension Kits - HAP-105-00

Hello everybody, this is Jeff at etrailer.com. Today I'm gonna take a look at this Dexter single Axle trailer hanger kit for two inch wide slipper springs. Now this kit here will include two five inch tall front hangers, two six and three eight inch tall rear hangers and the hardware needed for mounting your lease springs to the frame of your trailer. Now this kit here can also be used with the kit part numbers HAP-205-01, HAP-205-02, or the HAP-205-03 For tandem Maxwell applications, I did wanna pop up an insert to show you what those kit parts would look like. Basically, those kits would include two more hangers and two equalizers for a tandem axle application. Now this kit here is designed for use with 9,000 pound Dexter axles.

Features on this may zoom in, so you can go over these. This is designed to attach two slipper leaf springs to your trailer freight. Now the leaf springs are not included. You would have to buy those separately. This part here will include everything shown here on the table.

We'll start with these two five inch tall front hangers with the five eight inch diameter bolt holes. And when we say height on these we're not talking overall height. The height on a hangar is always measured from the center of the bolt hole to the top of the hangar. So if we go center to the top you can see it's gonna be right at five inches tall. And then over here it comes with two six and three eight inch tall rear hangers with the five-sixteenths diameter bolt holes.

And again, if we measure from the center of the bolt hole to the top, there's your six and three eight inch measurement for the height. It does also come with the two three and a quarter inch long five-sixteenths diameter spring keeper bolts with lock nuts. And over here it comes with two of the four and a half inch long five eight inch diameter spring eye bolts with lock nuts. Now this does not include any components for mounting your axle to the springs, but that should do it for the review on this Dexter single axle trailer hanger kit for two inch wide slipper springs.