Dexter Single-Axle Trailer Hanger Kit for 3" Slipper Springs - 6-1/4" Front

Video Transcript for Redline Trailer Suspension - Leaf Spring Suspension - HAP-103-00 Review

Speaker 1: Today we're taking a look at the Dexter Single Axle Trailer Hanger Kit for 3" Slipper Springs. This kit is designed to attach two leaf springs to your trailer frame. It can be used with HAP-203-01, HAP-203-02, or HAP-203-03, for tandem axle applications. All of those are sold separately. You can check 'em out at etrailer.com.But this kit that I'm showing you today is designed to attach two leaf springs to your trailer frame. So again, for single axle applications.And what you see here on the table is what you get.

So you get the hangers, and you get the hardware. So it comes with your 6-1/4" tall front hangers. And these front hangers have the 1" diameter bolt holes on it.Now, you'll notice that all the hangers have two holes on top. These are not for bolt-on installations. These are actually for spot welding.

So you weld this onto your trailer frame, and then these are for additional spot welds for more security and better attachment.But you get the two 6-1/4" tall front hangers with the 1" diameter bolt holes. Then you also get the 7-11/16" tall rear hangers. And these have the 1/2" diameter bolt holes.And then you get the 4-1/2" long by 1/2" diameter spring keeper bolts. You get the 1/2" diameter lock nuts, 5-1/2" long by 1" diameter spring eye bolts, and then the 1" diameter lock nuts.This is designed for use on trailers with 10,000-pound to 15,000-pound heavy-duty Dexter axles. And, keep in mind that it does not come with the components for mounting the axle to the springs.That's gonna do it for today's look at the Dexter Single Axle Trailer Hanger Kit for 3" Slipper Springs.

Speaker 2: inaudible 00:02:09.