Slipper Spring Hanger Positioning for 7,000 lb Tandem Axle
Question:
I’m building a tandem with7k slipper spring axles . From eye to inside of slipper part is 26 3/4. How do I figure out location of hangers. I’ve never dealt with slipper springs before. I have a 12 inch equalizer.
asked by: Chris H
Expert Reply:
The spring hanger placement is going to be determined by your axle spacing. For example, if your axles are spaced 33 inches apart, as shown in the attached diagram, a 7K axle slipper spring, like # e74SR, requires a distance of 28-1/2 inches between the front and center hangers and 29-1/2 inches between the center and rear hangers, when using our Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs with 12" Long Equalizers, # APT6SE.
I'm not sure exactly where you measured the 26-3/4 dimension of your spring, but I've also included a diagram to show you the typical slipper spring dimensions we take into account. For spring # e74SR, the "B" dimension of 22-3/4 inches is the distance required between the first hanger and the mounting point on the equalizer. The "C" dimension of 26-5/8 inches is the distance from the center of the eye to the end of the slipper.
I've attached our Axle Placement Help Article for you at the bottom of this page as well.
Manuel
11/14/2021
I’m building a triple axle trailer and I’m using some E 5115 7000# axles. My question is the dimension on my hangers. The distance apart of each hanger. Thanks
Products Referenced in This Question
Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Trailer Leaf Spring Suspension
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Tandem Axle
- etrailer
more information >
5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Hook End
- 7000 lbs
- 2 Inch Wide
- 5 Leaf
- 26-5/8 Inch Long
- Painted
- etrailer
more information >
Product Page this Question was Asked From
Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Trailer Leaf Spring Suspension
- Standard Equalizer
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- 12 Inch Long
- Tandem Axle
- Triple Axle
- TruRyde
more information >
Continue Researching
- Article: Slipper Spring Trailer Suspension System Review
- Shop: Tandem-Axle Trailer Hanger Kit for 2" Slipper Springs - 12" Long Equalizers
- Search Results: 235/80r16
- Video: Customer Interaction with the Erickson Adjustable Wheel Net
- Shop: Kenda Karrier ST235/85R16 Radial Trailer Tire with 16" Black Mod Wheel - 8 on 6-1/2 - LR E
- Shop: Ram Gooseneck Coupler w/ Load Bearing Pin - 8" Adjustment - Square - 2-5/16" Ball - 25K
- Shop: Equalizer for 2" Wide Slipper Springs - 12" Long - 7/8" Center Hole
- Shop: Erickson Adjustable Ratcheting Wheel Net w/ Hooks - 4" Wide - 3,333 lbs
- Shop: Erickson Replacement Adjustable Wheel Net for 14" to 29" Tires - 3,333 lbs - Qty 1
- Search Results: sp~161275
- Search Results: e5115
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Video: Erickson Tie Down Straps - Trailer - EM58522 Review
- Q&A: Is There a 3-D Drawing of Ram Gooseneck Coupler Load Bearing Pin - 8" Adjustment - Square - 2-5/16
- Article: Where to Position the Trailer Axle?
- Q&A: Can 235/85R16 Trailer Tire Replace a 235/80R16 Trailer Tire?
- Q&A: Best Option to Upgrade from Bias Tire Size 7.50-16 to Radial Trailer Tire
- Q&A: Upgrading Trailer Wheels to a Bigger Size than Stock
- Search Results: soft shackle
- Article: Double-Eye Trailer Suspension System Review
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: Where Should a Slipper Spring Sit on the Hanger Bolt of My Suspension
- Search Results: 20400
- Search Results: 7 wire
- Search Results: mcl10rkb
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Replacement Bushing Recommendation for a Equalizer for 2
- Video: TruRyde Trailer Suspension - Leaf Spring Suspension - TREQ4541 Review
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - APT6SE Review
- Video: Review of Redline Trailer Leaf Spring Suspension - Equalizers - AP216
Darryl
3/6/2024
I am confused with the hanger drawing. It shows dims that do not line up with the description. Dim c shows CL of hanger, yet description states dim between ubolts. Dim B shows distance between axles, but states distance between hangers?