Dexter Tandem-Axle Trailer Equalizer Kit for 2" Slipper Springs - 13-1/8" Long Equalizers

Video Transcript for Review of Dexter Trailer Leaf Spring Suspension - Standard Equalizer - HAP-205-01

Hello everybody, this is Jeff at etrailer.com. Today I'm gonna take a look at this Dexter Tandem Axle Trailer Equalizer kit for two-inch Slipper Springs. Now this kit here will include these two 13 and one-eighth-inch long equalizers and the necessary bolts and hangers for suspending your lead springs from your trailer frame. Now this is also designed to be used with the part number HAP-105-00 to give you a complete tandem axle kit. And I did wanna pop up an insert and show you what that part number would look like. That kit actually contains front and rear hangers and mounting hardware to make it for a complete tandem axle kit.

Now this is designed for use on tandem 9,000 pound Dexter axles. It does include everything shown here on the table. This will let you attach four slipper springs to your trailer frame. Now the springs are sold separately on our website. This will include these two 13 and one-eighth-inch long straight equalizers.

And, just to put a ruler on that to show you, there's your 13 and one-eighth inches length. Now these equalizers will allow for 38 inches between the axles. Does have a one-inch diameter center hole right here for mounting to the hangar. And then over here, you can see on this one, and on this one right here, has a five-eighths inch diameter side hole for attaching to the spring. Also comes with these two four-and-a-half-inch tall center hangers that have the one-inch diameter bolt holes.

And when we say four-and-a-half inches tall we're not measuring the overall bottom to top. When you measure the height on the hangar, it's measured from the center of this hole to the top. So if we go down to the center, there you can see, it's four-and-a-half-inch tall center hangers. It does also come with the hardware. Comes with these two, three-and-a-quarter-inch long by five-sixteenths diameter spring-keeper bolts with the lock nuts.

Comes with the two, four-and-a-half-inch long, five-eighths-inch diameter spring eye bolts with the lock nuts. And then the larger two, five-inch long, one-inch diameter equalizer bolts with the lock nuts. Now this kit does not include components for mounting your axle to the springs. But that should do it for the review on the Dexter Tandem Axle Trailer Equalizer kit for two-inch Slipper Springs.