Review of Dutton-Lainson Trailer Jack - Swivel Marine Trailer Jack - DL67MR Video

Boat jacks, including the Fulton jack you have, are typically constructed so that the inner tube of the jack and the yoke and caster are all one piece. Because of the way its constructed, the caster won't easily turn until the boat is rolling.…

Yes, the Extreme Off-Road Swing-Up Jack w/ Dual Wheels iItem #ORJW500D will work for your T@B 400 Tear Drop Trailer. It looks like your trailer comes with an a-frame jack. You would need to ensure you have enough space on your tongue to accommodate…

The Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels, #ORJW350D has an overall length of 18".

The travel of the Swivel Marine Trailer Jack with Caster Wheel part #DL67MR is 10" per the technical drawing from Dutton-Lainson which I have attached below.

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power…

The long brackets of the Removable Extreme Off-Road Swing-Up Trailer Jack #ARK57FR that mount on inside of trailer frame are little misleading since they are much taller than the bracket on the other side of the jack that it attaches to. Basically…

What you've got there looks like some type of proprietary mount that we don't offer. We do however have jacks that would work. I'd recommend having the mount removed and using a weld-on jack like the Fulton #FXP100W0301 and the #P9012-00…

The 15-1/2" retracted bracket height of the Fulton Bolt-Thru Swivel Marine Jack w/ Caster - Sidewind - Black - 10" Lift - 1,500 lbs #F87CR is measured from the center of the mounting bracket to the bottom of the caster with the jack fully…

We have the Dexstar Steel Spoke Trailer Wheel - 15" x 5" Rim - 5 on 4-1/2 - White Powder Coat, #AM20422. This is the Dexstar 5" 017-143-1X wheel. For a tire with a 2150 lb. load rating that fits this wheel, I suggest the Karrier…

In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along with…

The 60/40 axle placement formula is a great starting point and does take into account the tongue of the trailer from where the trailer sits on the hitch ball. Please keep in mind that this is a very basic formula or estimate for axle placement. For a…

I went to our warehouse and measured the clearance between the mounting bracket and the leg of the Round Swivel Marine Jack, part #MJ-1206B. That distance is 1-3/4 inches. I have attached a photo of the jack with the dimension noted you can check…