Titan 30 inch Long Safety Chain with S-Hook Review Video

The 60/40 axle placement formula is a great starting point and does take into account the tongue of the trailer from where the trailer sits on the hitch ball. Please keep in mind that this is a very basic formula or estimate for axle placement. For a…

The closest we come to the 2-1/2 inch center to center measurement of the mounting holes you have on your coupler and trailer are 2-1/4 inches, just as you said you have found. The trailer coupler I recommend is part #CT-2002-Z. This is a 2,000-lb…

I went to the warehouse to take the measurement you were asking about and found the distance from the top to the side holes on coupler #CT-2003-Z to be almost 1 inch exactly.

The only straight tongue trailer coupler we offer for a 1-7/8" hitch ball that fits a 2-1/2" wide channel is the Channel Tongue Trailer Coupler part #CT-2002-Z. The bolt holes on this coupler are spaced 2-1/4" apart. Unfortunately, I…

The Fulton 11-300 1-7/8" coupler was discontinued and, according to my contact at Horizon Global, repair kits are no longer available. The only solution is to replace the coupler. I recommend using the Channel Tongue Trailer Coupler #CT-2003-Z.…

The Demco A-Frame Trailer Coupler #DM14793-81 (Black) or #DM14793-52 (Silver) do not come with bolts. You will need to use 1/2" Grade 5 hex bolts with them. I've added links to video reviews of each coupler for you to check out.

Yes, we have channel-mount style couplers for 1-7/8 inch hitch balls like the part #CT-2003-Z. This is a bolt-on coupler that fits a 3 inch wide channel.

I did some research online and I found a coupler with some lower mounting holes that looks similar to the Ram's. It is the Titan Coupler - Painted - Multi-Fit Ball - 3" Channel - Bolt On - 5,000 lbs item #T2343400. I have attached a diagram…

The Channel Tongue Trailer Coupler part #CT-2003-Z looks to be an excellent replacement for your trailer coupler based on the info and photo you have provided. It doesn't come with hardware and I don't recommend reusing the existing so a trip…

To determine the location for the front and rear hangers on your tandem axle trailer you will first need to make sure that you have the correct center point for your equalizer hanger. The center point of your equalizer hanger needs to be located…

The two tire sizes you have are similar but they are not the same. The 215 tire size is slightly larger in diameter and in width. You would want to go with a new wheel and tire in the size of ST205/75R14 like the part #AM32153 to match that size. The…

You are correct that the Atwood 82311 is no longer available, but there is a similar coupler with the same specs, which are a 3,500 lb capacity, couples to a 2 inch hitch ball and fits a 3 inch channel. For that I recommend the Trailer Coupler…