Customers compare DM15000-52 to these similar products
Products Featured in this Video
Today we're going to be taking a look at part number DM15000-52. This is the Demco channel tongue trailer coupler. It's going to accept a two-inch hitch ball. The straight tongue coupler is made of a sturdy steel construction. It's going to feature a really nice silver powder coat finish. It's going to have the easy latch design, so it's going to ensure a fast easy secure hookup and disconnect.… see more >
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Videos
Help Articles
Expert Answers
The Trimax Puck Lock for Trailer Door Hasps #TMX96RR cannot be keyed alike. While disappointing I'm sure, there is another option to consider, which is to order a quantity of two of the Trimax Puck Locks for Trailer Door Hasps #TMX73FR. The…
view full answer...Hi Ed, If I'm understanding you correctly your trailer's frame is 3" wide and the coupler needs to have a 2" ball. If so the Demco Channel Tongue Trailer Coupler #DM15000-52 you were looking at would be a compatible…
view full answer...A drum, or hub and drum, is not included along with the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-468-469. These are 3,500 lb electric trailer brakes that fit a 10 inch drum, so if you do need a new hub and drum I have added a link below…
view full answer...I currently have three diffrent self-adjusting assemblies for your boat trailer with 10" x 2-1/4" electric drum brakes which are attached for you below. eTrailer Electric Trailer Brake Kit part #AKEBRK-35-SA (3,500 Axles) Dexter…
view full answer...The HydraStar Electric Over Hydraulic Actuator for Disc Brakes - 1,600 psi #HBA16 you were looking at is the correct Electric Over Hydraulic actuator for the disc brakes on your tandem axle boat trailer. You can lock out your Titan Model 10 surge…
view full answer...The hanger spacing for the #APT4 with 25-1/8" leaf springs is 27-3/4" on center. I have attached a drawing for your reference.
view full answer...Absolutely. Trailer jack #PS1400850383 was designed to be welded on to a trailer frame so you made an excellent choice. Any welding should be performed by a qualified professional welder. I have included a link to a video review of this jack for…
view full answer...The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...The two couplers you referenced are identical size-wise. The #DM15000-52 is a bolt-on application with the EZ latch system and a silver finish. The DM12563 uses a standard latch, is a weld-on application and has a red finish. For the #DM15000-52,…
view full answer...The center hangers in the Tandem-Axle Trailer Hanger Kit #APT8 that you recently purchased are indeed longer. This is actually pretty common for tandem axle trailers. The reason for the extra length on the middle hanger is related to the shackle…
view full answer...The ball must be greased when using the Curt RockerBall Shock Absorbing 2" Hitch Ball #C40047. As you can see by the cut out of the linked instructions, if you don't have adequate lubrication the ball can fail so it is imperative you…
view full answer...Traditionally, trailer manufacturers did not use electric brakes on boat trailers because the brake magnet wiring and trailer wiring did not always have the best insulation or water protection. These days, more and more manufacturers are using…
view full answer...