bing tracking image
Q & A Icon

How To Install a 30 Amp Service on an Enclosed Cargo Trailer  

Question:

I have a 7x16 cargo trailer that I use as an onsite service trailer. I currently run a extention cord to a power strip for inside power. I want to set this up to run off a 30amp shore line or connect to a 3500W inverter generator mounted on the trailer tongue if I should not be near shore power remote. I plan on installing 4-5 interior outlets with one dedicated to run a portable 10K BTU AC, then the others would be for laptop, power tool chargers, maybe a mini fridge or other small electrical items and one 4ft LED shop light. Could you guide or suggest the best route to make this happen.

0

Expert Reply:

Yes, in order to set your trailer up for use with shore power you will first need an AC distribution panel. For this, I recommend a Progressive Dynamics Series AC Distribution Panel. In order to bring power into the panel you will also need a power inlet, the Epicord 30 Amp Twist Lock Power Inlet part # 277-000138 and a shore power cord, the Furrion RV Power Cord with Handle part # F3OR36SBOEM.

If you want to sometimes power the trailer with a generator you will also need an adapter for the above shore power cord, the Power Grip Generator Adapter for RV Power Cord part # CAM55272. The rest of the outlets, wires, and conduit can be obtained from your local home improvement store.

expert reply by:
0
Conner L

Products Referenced in This Question





Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching