Ark Sidewind Extreme Off-Road Swing-Up Trailer Jack Review Video

The Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels, #ORJW350D has an overall length of 18".

Yes, the Extreme Off-Road Swing-Up Jack w/ Dual Wheels iItem #ORJW500D will work for your T@B 400 Tear Drop Trailer. It looks like your trailer comes with an a-frame jack. You would need to ensure you have enough space on your tongue to accommodate…

The advantage of the Extreme Off-Road Swing-Up Jack with Dual Wheels - Zinc #ORJW500D is getting that higher 1,100 lb capacity and the bigger 10-3/4" lift. This is great for longevity purposes, especially if you'd like to move the jack to…

From the ground to the middle of the mounting bracket for the Extreme Off-Road Swing-Up Jack w/ Dual Wheels #ORJW500D measures 710mm (27.95") when you have it set at the highest setting. This jack gives us the ability to extend the leg using the…

From the center of the mounting bracket (Pivot point) to the bottom of the wheels of the Extreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels - Sidewind - 7" Lift - 770 lbs - Zinc #ORJW350D is 9-1/2" with the jack full retracted, and is…

The Xtreme Off-Road Swing-Up Trailer Jack w/ Dual Wheels #ORJW350D does not come with the bearings installed. You can use something like a rubber mallet or a block of wood and hammer to tap them into place until they are flush.

To determine the correct jack capacity for your boat trailer, you will need to know the tongue weight of the trailer. Once the tongue weight is known you can select a jack with a lift capacity that is equal to or greater than the tongue weight of…

Hey Rich, that is a really good question. The short answer is, no, you do not need to go relocate your jack. According to the manufacturer, mounting the jack on the middle rail allows it to more evenly distribute the weight of the trailer, making it…

The Extreme Off-Road Swing-Up Trailer Jack part #ORJW350D would be the best option for an InTech Flyer Pursue Travel Trailer. The weight capacity of said jack is more in-line with the tongue weight of the trailer.

The pivoting trailer jack we offer that has the lowest retracted height is the Extreme Off-Road Swing-Up Trailer Jack #ORJW350D which can be adjusted down to having a retracted height of 9-1/2 inches.

Here is an image I have from the Xtreme Off-Road Swing-Up Trailer Jack #ORJW750D in zinc which will have the same dimensions as the black Jack #ORJW750BD you are looking at.

The Ark Extreme Off-Road Swing-Up Jack #ORJW350D fits a wide variety of trailers. The mounting bracket will measure 7-1/2" tall x 5-1/2" wide. The vertical holes are 3/4" apart and the horizontal holes are 1" apart. This makes it…