Draw-Tite Ball Mounts - Fixed Ball Mount - 40332 Review Video

With Draw-Tite trailer hitch #75742 installed on your 2014 Honda CR-V the face of the receiver will be almost flush with the rear bumper. It won't stick out quite as far. Take a look at the picture I have included. You can see that the receiver…

The main reason you would use a class III hitch like the Draw-Tite Max-Frame Trailer Hitch Receiver #75742 you referenced is because, the 2" x 2" receiver opening featured on a class III hitch is the most common size for hitch mounted…

The Draw-Tite Class III Max Frame Round Tube Receiver Hitch #75742 referenced in your question is confirmed to fit your 2014 Honda CR-V LX. I did take a look at the online owner's manual for your Honda CR-V and saw that the maximum trailer weight…

It does seem rather odd that Draw-Tite #75742 would construct the hitch with a mount to attach a trailer connector mounting bracket when the trailer connector harnesses for the vehicle are designed to be installed so that the trailer connector is…

We have both the hitch and wiring you need to tow with your 2010 Honda Odyssey. Starting with a trailer hitch you'll need the Draw-Tite #75270 and to add a 4-flat to your Odyssey so you can power your trailer's lights I recommend the Hopkins…

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find…

I spoke to a tech over at Curt and they confirmed the ball platform on their #C24WR is right at an inch thick. If you were looking for a ball to go with this, the Brophy #EH68C-C will be an 8,000 pound 2 inch ball option, and the Curt #C40007 will be…

I do see your issue and I have a few options that come to mind for overcoming this on your 1995 VW Eurovan. First the Curt Trailer Hitch Receiver #13217 does have a unique design in that the cross tube is bolted to the brackets and can be removed.…

Using the push rods of the Derale Dyno-Cool Tube-Fin Transmission Cooler Kit #D12903 will not cause any damage to the condenser of your vehicle. The fins are designed to be slightly bent and not be permanently damaged. Also, no amount of damage to…

If you already installed the 4-Way Curt Wiring Harness #C56225 on your 2011 Nissan Xterra, you will only need the Replacement Wiring Harness #118267. You will not need the full 7-Way T-One Vehicle Wiring Harness #118266 as you already have the relays…

Installation of the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56225 that fits your 2019 Nissan Frontier (without a factory connector) is very straightforward, but installing a harness on a Nissan does require the use of…

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…