Convert-A-Ball Ball Mount for 2-1/2" Hitches - 4-3/4" Rise, 6" Drop - 18,000 lbs
(1226 reviews)
Price: $158.90
In Stock
Convert-A-Ball Ball Mount for 2-1/2" Hitches - 4-3/4" Rise, 6" Drop - 18,000 lbs
Item # AMSCV-6
Retail:$171.99
Our Price: $158.90
You Save: $13.09
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (1226)
- Q & A (0)
- Photos
Convert-A-Ball Trailer Hitch Ball Mount - AMSCV-6
- Fits 2-1/2 Inch Hitch
- Fixed Ball Mount
- Drop - 6 Inch
- Rise - 5 Inch
- No Ball
- 18000 lbs GTW
- Class V
- Convert-A-Ball
- Shock Absorbing
- Steel Shank - Gloss Black
- 1-1/4 Inch Ball Hole Diameter
Sturdy steel ball mount with a solid shank measures 9" from center of hitch pin hole to center of ball hole. Polyurethane interior acts as a shock absorber to reduce vibration. Powder coat finish protects against rust.
Features:
- Ball mount lets you hook up your trailer to your tow vehicle
- Shank slides into your vehicle's hitch receiver
- Ball platform provides mounting point for hitch ball (sold separately)
- Polyurethane interior acts as a shock absorber, reducing bounce and rhythmic vibration
- Protects tow vehicle's driveline and hitch assembly, as well as trailer's contents
- Both drop and rise positions available to ensure level towing
- Sturdy steel construction
- Corrosion-resistant powder coat finish
- Hitch pin and clip or hitch lock sold separately
- Made in the USA
Specs:
- Application: 2-1/2" x 2-1/2" trailer hitch receivers
- Gross towing weight: 18,000 lbs
- Tongue weight: 2,000 lbs
- Length: 12-1/4"
- 9" From center of hitch pin hole to center of ball hole
- Rise: 4-3/4" from top of inside of hitch opening
- Drop: 6" From top of inside of hitch opening
- Ball hole diameter: 1-1/4"
- Ball platform: 1" thick
- Pin hole diameter: 5/8"
- 2-Year limited warranty
Shock Absorbing Ball Mount
Convert-A-Ball ball mounts are designed with a polyurethane interior that helps to absorb road shock to limit bouncing and vibration while you tow over rough terrain. It also reduces the slamming and banging that occurs during stops and starts. This helps to protect your vehicle's driveline, your hitch assembly, and your trailer's contents while you're towing.
This Convert-A-Ball ball mount meets or exceeds THMAV-5 ratings in all categories and meets SAE standard J-684.
AMSCV-6 Convert-A-Ball Super Duty Cushioned Ball Mount for 2-1/2" Hitches - 4-3/4" Rise - 6" Drop - 18,000 lbs GTW - 2,000 lbs TW
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Defective
Customer Reviews
Convert-A-Ball Ball Mount for 2-1/2" Hitches - 4-3/4" Rise, 6" Drop - 18,000 lbs - AMSCV-6
Average Customer Rating: 4.9 out of 5 stars (1226 Customer Reviews)
Sturdy steel ball mount with a solid shank measures 9" from center of hitch pin hole to center of ball hole. Polyurethane interior acts as a shock absorber to reduce vibration. Powder coat finish protects against rust.by: John03/05/2022
These hitches are the best! And I scanned the world over to find only hitches that are made in USA like I do every product I buy. This is a very ingenious design that allows some shock absorption that greatly quiets any trailering. I bought two full hitches one for each ball size so that I would never have to change ball again! Great product!
by: Ken R.10/26/2013
Just received this mount and did the test fit with our trailer. We have not hit the road with it yet but I am confident it will perform perfectly. I am anxious to see how the cushioned feature works. We pull a box cargo trailer for business and just got a new Chevy HD pickup to tow with. It has a 2.5" receiver and hitch height is much greater than the Suburban we were using plus it had a 2" receiver. This mount is rated for far more weight than we will ever need but it was the only 2.5" size with 6" drop that I could find. We are very pleased with the product and the excellent customer service we got at etrailer. Thanks to everyone there for the very fast service and for keeping me informed as to the status of my order. well done!
Monty F.
8/5/2015
Now that you have driven with the cushioned ball mount for a while, do you think the cushioned feature is beneficial?
Ken R.
8/8/2015
Have now used this mount several times. It is VERY heavy duty and we get no where near its full capacity. I do like the cushioned feature. It noticeably reduces usual shocks that get transmitted to the tow vehicle which, in my opinion, reduces stress on driveline components. The 2.5 inch shaft size eliminates the need for a reducer sleeve for 2 inch mounts which firms up the whole vehicle trailer connection. Also increases comfort for driver and passengers. I did make one mistake however. I figured the amount of I needed by the book. The formula said I needed six inches of . I did not anticipate enough squat in the truck with trailer loaded. As it turned out, I had to use a two inch riser ball to put the front of the trailer where I wanted it. A four inch mount would have been sufficient but I still recommend this product.
by: Donald04/20/2020
I was a bit upset when I found out that my New 2020 F-250 receiver has a 2.5"
box !
Greg S took the time to listen exactly what my needs were and guided me in
the right direction !
Actually he caught a mistake I made when ordering, and personally called me
then followed up once it was delivered, Many companies could learn something
about Customer Service from etrailer.
Donald
4/22/2021
Fantastic
by: Jon 04/06/2023
I haven’t used it yet but looks well built and they shipped very fast. I strongly recommend using trailer!!
by: Doug B.03/14/2014
Quick shipping and no problem getting it to work in my 2012 Ford F350. I have another one just like it for the 2" ball and bought a second one for the 2 5/16". Tows my 12' trailer really well and will be using the new one for a 20' equipment trailer.
Doug B.
4/3/2015
One year later and both products working great. Towed the 20 trailer on a 1,200 mile round trip and the cushion mount worked better than expected.
by: Michael06/02/2022
It was a bit pricey but totally worth it. No more bump from behind and it’s quiet. The hitch feels very solid while you’re towing. This is my review after using it for a year towing a car trailer.
by: Beau E.02/24/2017
Just installed the new ball mount to my truck and it is a beast. This hitch is very well built and braced with extra welded support underneath hitch. So far very pleased but as being brand new haven't had the chance to treat it out therefore not a 5 start review, yet. Will drive home this weekend for a 4 hour trip will update after.
by: Lynn09/11/2018
Looks strong enough to handle 18k with gusset and thickness of the 6” drop, delivery was on time.
Lynn
9/11/2019
All good
by: Todd10/18/2015
High quality piece. Have only towed a couple times. Surprised not many choices for 2 1/2in hitches. I did not want to mess with the converters to 2in.
by: Ken L12/06/2013
What a great way to shop for towing supplies! I live in a fairly large city, where I ran all over town shopping for the correct setup for my wife to tow her horse trailer behind our new truck. All that time and all it did was confuse me about what I wanted (needed).
In frustration, I went to the internet and found etrailer; nothing but facts and specs and great prices! In 10 minutes my 2 day job was complete, I had all the correct stuff ordered at a great price and it arrived promptly at my door. Rate it AAA+
by: Ron03/28/2019
I was very pleased with the trailer hitch I ordered from e-trailer. It is really good quality and extremely heavy duty. It also has a great paint job. My hitch was easy to order, exactly what I needed and was delivered in two days. Very pleased!!
by: Paul 07/30/2020
What an excellent piece of hardware. Totally cuts out the rattle from trailer rocking and provides a smooth quiet ride when pulling my trailer and driving over bumps in the road. Will definitely be purchasing from etrailer.com again!
by: Starcher03/20/2015
etrailer delivered perfect execution - how often does that happen? I needed to buy a few "non-standard" parts and they had them in stock and shipped them immediately. Subsequently when I needed more stuff, I didn't search the web, I went straight to etrailer.
Thanks for delivering an exceptional value and service.
by: Paul04/09/2021
The hitch is very well built after one year has not bent at all and the rubber is still in very good condition.
by: Scott S11/04/2013
I have a large dump trailer and this ball mount works flawlessly!
by: Danny R.12/23/2016
Very high quality item better than expected. Better than other alternatives for the price. No more trailer balls lapping when brakes are applied with trailer delay.
by: Mark F.02/09/2015
Great Ball Mount - I thought it was a little expensive to start, but I would purchase again without hesitation having received the product. Much more heavy duty than I expected. Delivery time was better than expected. I will recommend to family and friends.
by: Eugene11/24/2020
This company has a huge selection of everything, and two times on different orders their sales person called me late at night to inform me of a better selection and much better price. Who does that? It's like getting personal help in the store. Really good help.
by: Rich H06/21/2016
Pretty manly class V hitch. Still waiting on some balls. Wait, can I say balls?
by: Andrew D11/01/2014
Just as described. Comprehensive product information, photos and videos made purchasing online very easy and worry free. Order processing and shipping were lightning fast. A really great experience, will definitely shop here again.
by: George05/29/2016
Had what I wanted, when I wanted it and was shipped out right away. Kept me inform on status of order. One of the best internet companies to deal with.
by: Larry M.01/07/2014
Very well made product and the service from etrailer was exceptional. My original order was incorrect as a result of my wrong measurements, and the service department was quick to resolve my problem.
by: Phil S05/01/2017
This is a great hitch - well-built and the cushioning is a great upgrade. No more 'THUNK' when pulling away at the stoplight.
by: Ken c02/08/2019
Heavy duty design for pulling over 10,000lb enclosed car trailer.
by: Jim 01/10/2022
Extremely satisfied with this draw bar.
25
1220
Show More Reviews
See what our Experts say about this Convert-A-Ball Trailer Hitch Ball Mount
- Weight Distribution Shank or Ball Mount with 6 Inches of Drop to Tow Trailer LevelIt sounds like the trailer has a weight distribution system. You would just need a weight distribution shank that offers more drop such as # C17123 for a 2 inch hitch receiver or # EQ90-02-4900 for a 2-1/2 inch hitch. If the trailer does not have weight distribution then you will just need a ball mount that has the proper amount of drop or an adjustable ball mount. For a fixed ball mount with 6 inches of drop for a 2 inch hitch you can use # 4282. For a 2-1/2 inch hitch you can use cushioned...
view full answer... - Does Tongue Weight Sag Get Factored In When Picking Out Rise/Drop Ball MountThis is a really great question! So ideally you have the trailer sitting as level as possible when you are towing. So that means that if your vehicle suspension is going to sag with the tongue weight of your trailer on the ball mount you'd want to compensate for that with the amount of rise/drop ball mount you select. How this normally works out is that you determine the drop needed (in your case 8 inches) and then go with a ball mount slightly higher like the Curt part # C45100 which...
view full answer... - Version of Convert a Ball Cushioned Ball Mount with 6 inch Drop That Fits 2.5 inch HitchYes, the # AMSC6HD could be used with a hitch reducer sleeve like you mentioned but since these types of adapters can cause a bit of movement your best option would be the version of this ball mount that is designed to fit 2-1/2 inch hitches directly part # AMSCV-6. This has the same 6 inch drop but has a higher 18,000 lb towing capacity.
view full answer... - Weigh Safe 180 Adjustable Ball Mount Recommendation for 2-1/2 inch HitchSince you have a 2-1/2 inch hitch the easy answer is that what you want is the 180 Hitch 2-Ball Mount # LTB6-25. Reason being Andersen does not make a ball mount for the larger 2-1/2 inch hitch size. The Weigh Safe 180 that you mentioned is a great option that will work well for you. Check out the review video I attached for more info as well.
view full answer... - Is Sag Caused by Trailer Tongue Weight Considered When Choosing Ball Mount w/the Right Rise or DropAt most the tongue weight of a trailer would cause about 1/2 inch to 1 inch of sag at the ball mount (give or take a little and different for every vehicle). But on a 2016 Ford F-250 the suspension is potentially beefy enough to limit the sag to even less than that. The trailer can be off of level one way or the other (high or low) by as much as 1 inch and still be considered level. For cushioned ball mounts that fit a 2-1/2 inch trailer hitch receiver we have the following options: #...
view full answer... - Ball Mount Recommendation for a 2016 Ford F-350 with 2-1/2 Inch Trailer HitchSince the tongue weight of the trailer will pull down a little on the truck you can go with a ball mount that has a 5 inch drop. I actually recommend going with an adjustable ball mount that has multiple balls, # WS6-25. This ball mount has a 2 inch and 2-5/16 inch ball, a built-in tongue weight scale, and the height can be adjusted in 1 inch increments. It is also made of aluminum so it won't rust. If you want to go with a regular cushioned ball mount then the best option for a 2-1/2...
view full answer... - Ball Mount for 2-1/2-Inch Hitch That Gives 8-Inches of DropThe Convert-A-Ball 2-1/2-Inch Cushioned Ball Mount # AMSCV-6 provides height drop of 6-inches but since they do not offer one like it with 8-inches of drop you can instead check out the items on the linked page which provide 8-inches of drop. These include both fixed ball mounts like 12K Draw-Tite # 45291 and 20K Curt # C45460 and adjustable ball mounts like Bullet Proof # ED258.
view full answer... - Is Any Maintenance Required With the Convert-A-Ball Cushioned Ball Mount # AMSCV-6?The Convert-A-Ball Ball Mount # AMSCV-6 uses a polyurethane cushion which requires zero maintenance. My only recommendation is if you plan on always leaving the ball mount in with either a Pin & Clip # 74149 or Lock # e98881 is to use some Anti-Seize # LT37616 on the pin. This will help to reduce the problems removing the hitch pin if it left in and begins to corrode.
view full answer... - 10to 12 Extended Ball Mount For Class-5 Hitch With 2 Receiver?In your question you state that you have a Class-5 hitch, and they come with a 2-1/2” receiver opening. You also state that you have a 2” receiver. I will offer a ball mount solution for either size receiver. For a 2” receiver you can use the 13-1/4” long Brophy # BM20 with 2” drop, or the 14-1/4” long Curt # D-28 with 6” drop. For a 2-1/2” receiver you can use the 12-1/4” long Convert-A-Ball # AMSCV-6 with 6” drop, or the 10-1/2” long Draw-Tite # 45291 with a 7-3/4” drop, or the 13-1/4”...
view full answer... - What is the Heaviest Cushioned Ball Mounts We Currently Offer The heaviest cushioned ball mounts we currently offer are 18,000 pounds gross towing weight. The tongue weight is 2,000 pounds. They are the Convert-A-Ball # AMSCV-6, # AMSCV-2 and # AMSCV-4. The most popular of the 3 we currently offer is part # AMSCV-6. It has a 4-3/4 rise and 6-inch drop. I included an FAQ and video reviews for you as well.
view full answer... - Measurement From Hitch Pin Hole to Gusset on Convert-A-Ball 2-1/2 Inch Ball MountThe Convert-A-Ball ball mount, part # AMSCV-6, has about 3-13/16 inches from the center of the hitch pin hole to the gusset. Keep in mind there is a weld right there at the gusset so that measurement could slightly vary from one to the next but not by much. I measured three of them, and two were the same and the other was 3-7/8 inches so we're not talking much difference at all
view full answer...
- Ball Mount Recommendation Rated for 14,000 Pounds Gross Trailer Weight on a Ford F-450To determine the receiver size you have, I have included a link to an FAQ that will help. The Reese 2-1/2 inch Titan ball mounts like # RP45323 or the one found in # EBMK25318, tend not to fit the factory 2-1/2 inch receivers on Ford Super Duty trucks. You will need to use one of the Convert-A-Ball ball mounts. We have # AMSCV-6 with a 6 inch drop or 4-3/4 inch rise. We also have # AMSCV-4 with a 4 inch drop or 2-3/4 inch rise. And then we have # AMSCV-2 with a 2 inch drop or 3/4 inch...
view full answer... - Ball Mount Recommendation for a 2013 Ford F-350 with Factory 2-1/2 Inch Trailer HitchThe OEM Ford 2-1/2 inch receiver has more rounded edges. Many 2-1/2 inch accessories, in this case ball mounts, have more squared off corners. This difference causes the squared off accessories not to fit. In some cases, some of the powder coating can be removed from the shank on the accessory as long as none of the metal is ground off. That could work on a ball mount like # 45123 since it has more rounded corners than something like # RP45323. If you use an accessory that has more rounded...
view full answer... - Ball Mount to Use with Weigh Safe Stainless Steel Hitch Ball with Built-In Scale WSUN-1The Weigh Safe Stainless Steel Hitch Ball with Built-In Scale # WSUN-1 requires that the ball mount it is used with has a 3/4-inch thick ball platform. The B&W 2-1/2-inch Ball Mount # BWBMHD30214 that you referenced has a ball platform that is 1-inch thick so it will not work with this ball. Same holds for part # AMSCV-6. Sine this hitch ball is rated to 10K, the larger and heavier-duty 2-1/2-inch ball mounts like those noted above, which are rated for much more weight, will be too thick...
view full answer... - Will Convert-A-Ball Ball Mount # AMSCV-6 Fit Factory 2-1/2 Inch Hitch on 2019 Ford F-250The Convert-A-Ball Ball Mount # AMSCV-6 referenced in your question will work perfectly with the 2-1/2 inch factory receiver on your 2019 Ford F-250. This sturdy steel ball mount will slide right into the 2-1/2 inch receiver without the need for an additional adapter and its polyurethane interior acts as a shock absorber to reduce bounce and vibration. It is made right here in the USA and features an 18,000 pound towing weight capacity. You will just need to add a standard pin and clip...
view full answer... - Ball Mount Recommendation for a Ford F450 with a 2-1/2 inch Hitch OpeningThere are three ball mounts we offer that will work for the 2-1/2 inch hitch on your Ford F450 with a 2-1/2 inch opening. The problem that many encounter is that the Ford 2-1/2 inch hitches are very tight with round corners and many ball mounts like the Reese Titan Ball Mount # RP45323 that you referenced will not fit without modification. The ball mounts we have found to work on the Ford 2-1/2 hitches are the Cushioned Ball Mount # AMSCV-2, the Cushioned Ball Mount # AMSCV-4, and the...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Adam R
Test Fit:
Matthew K
Installed by:
Cole B
Installed by:
Randy B
Installed by:
Clayton O
Video Edited:
Chris R
Video by:
Zach D
Updated by:
Brian T
Updated by:
Hannah L
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John
3/6/2023
A year later, since I last reviewed these and riches still work beautifully. And they are so heavy duty and durable that it is the last hitch you will ever buy. I am a machinist and own a large CNC manufacturing facility in California. Products made in USA 99.9 of the time or far superior to anything else you can buy. It may be a little more expensive than the crap you buy at Walmart, but you were investing in our country and our workforce. Outstanding product!