Convert-A-Ball Interchangeable Ball Set Review Video

The Curt Slim Adjustable 2-Ball Channel Mount #C46KR that you referenced has two hitch pin holes that are one inch apart so the first pin hole has a distance of 10 inches from the ball center to the hitch pin and the other is 11 inches.

If you use the Curt hitch extender part #C45048 in the 24 inch length with a weight distribution system the towing capacity is 8,000 lbs. If the 24 inch length would work for you this would be a great option.

The Air Lift AirLift 1000 Air Helper Springs for Coil Springs will work in the exact manner you want; improving the ride and how your 2014 Ram 1500 handles when you are towing. These air springs will reduce the strain on your Ram's suspension and…

At most the tongue weight of a trailer would cause about 1/2 inch to 1 inch of sag at the ball mount (give or take a little and different for every vehicle). But on a 2016 Ford F-250 the suspension is potentially beefy enough to limit the sag to even…

I believe I have something that will work for you, but the Curt Hitch Ball #C40007 that you referenced is not made in the USA, it is made in China. You might be interested in a Convert-A-Ball Interchangeable Ball Set #904B. This product is made in…

The tongue weight of a trailer depends on the size of the trailer and how it is loaded. Typically, the tongue weight is 10 to 15 percent of the weight of the trailer in its fully loaded ready-to-tow condition. You can use a tongue weight scale like…

While the Edge Pulsar V3 L5P Inline Tuner with Insight CTS3 Monitor #EP54KR is not designed to void any factory warranty since it connects to the factory PCM without any modification to the vehicle hardware. It does reluctantly come down to GM if…

We have the cotter pin part #165649 which would work great with the Convert-A-Ball Interchangeable Ball Set #900B. This pin is a standard cotter pin like what the ball set uses.

The total length of the shank on the Convert a Ball Interchangeable Ball part #105TB is 3-1/2 inches and the threaded portion is 3 inches so the unthreaded portion is 1-1/4 inch at the base of the flange and then 1/2 inch below the threads.

A chrome finish ball #C40036 is going to look good but it will not be corrosion resistant. A ball with a machine finish like #C40087 , is going to have about the same corrosion resistance. In terms of performance they will wear at about the same rate…

The Convert-A-Ball Interchangeable Trailer Ball Kits are perfectly safe up to their 10K capacity, just as safe as a standard one-piece trailer ball, so you'll have no worries there. This is without a doubt the type of interchangeable ball I'd…

It sounds like you're looking for the Convert-A-Ball Interchangeable Ball Set - 2" and 2-5/16" Balls - 1" Shank - Nickel #904b. This hitch ball enables you to switch between having a 2" or 2-5/16" hitch ball depending on…