Curt Ball Mounts - Fixed Ball Mount - C45240 Review Video

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could…

The Curt ball mount #C45042 only comes with the ball torqued into the drop position but we do have part #C45155. This has the ball in the rise position and it's a 2-1/4 inch rise but it's only a 2 inch ball not a 2-5/16 inch. If you…

For your fixed ball mount with at 4 to 4-3/4 inch rise, I recommend the Curt Dual Length Ball Mount for 2" Hitches - 4-1/2" Rise, 5-3/4" Drop - 7,500 lbs #C45240. This ball mount will also need a hitch ball like #63845 for…

I recommend the Curt 2-5/16" hitch ball item #C40005. It has a 1" diameter x 2-1/8" long shank, with 0" of shank rise, and is rated at 7,500 lbs.

If you check out the install picture I attached for the Curt hitch part #C13416 you can see that it hangs at the same height as the exhaust pipes and only sticks out a little bit past them so you'd have the same ground clearance you have now. Or…

We haven't had the opportunity to install the #EH97FR EcoHitch as of yet, but hen we installed the Curt #C13416 on a 2021 RAV4, we found that the inside top edge of the receiver tube sat about 12 inches above the ground, which would place the…

You actually won't need to trim any rear fascia when installing any of our trailer hitches on your 2020 Toyota RAV4. Out of our selection I recommend going with the Class III Curt Trailer Hitch #C13416 because it has a 2" receiver (so it is…

The second pin hole of the Curt ball mount part #C45240 that you referenced is 3 inches behind the first one. That means the second pin hole is 6-1/4 inches from the weld bracket.

The Draw-Tite Max-Frame Trailer Hitch Receiver #75742 referenced in your question, which is confirmed to fit your 2014 Honda CR-V, uses four M10 X 1.25 X 30 CL8.8 hex bolts. If you happen to have any trouble threading the bolts into the frame of your…

It does seem rather odd that Draw-Tite #75742 would construct the hitch with a mount to attach a trailer connector mounting bracket when the trailer connector harnesses for the vehicle are designed to be installed so that the trailer connector is…

The Draw-Tite Class III Max Frame Round Tube Receiver Hitch #75742 referenced in your question is confirmed to fit your 2014 Honda CR-V LX. I did take a look at the online owner's manual for your Honda CR-V and saw that the maximum trailer weight…

After you install the Curt hitch part #C13416 on your 2019 Toyota RAV4 you'll have right at 10-1/2 inches of ground clearance measured from the bottom of the hitch to the ground. I attached an install video for this for you to check out as well.