Curt Ball Mounts - Fixed Ball Mount - D-28 Review Video

Yes, the Curt ball mount part #D-28 is made in the USA. The part #C45070 is a very similar ball mount that is much shorter but has same rise/drop.

Rock Tamers has a heat shield specifically for their mud flaps as the part #RT76FR which is the kit you'd want since this is the mud flap system you have. There's no reason the Access one you mentioned couldn't be used but the gap the…

I suggest using heat shields #RT76FR with the rock tamers #ERT00108 unless you have an aftermarket tip on your exhaust that makes a complete 90 behind the tire.

When installing Rock Tamer Mud Flaps, there is not an exact distance that it needs to be form the exhaust. If the exhaust on your truck is routed straight back then you will want to install Exhaust Outlets #ERT200 so that the exhaust is routed…

The Rock Tamers Adjustable Mud Flap System, part #ERT00108, offers height, width and angle adjustment to match a range of vehicles. Please note that there must be at least 1-inch of clearance between the back of the ball mount face and the trailer…

The angle of the arms that hold the flaps of the Rock Tamers Heavy-Duty, Adjustable Mud Flap System #ERT00108 are adjustable so that you can add distance between the tail pipe and them as needed. If you install the heat shield part #RT76FR that you…

If the exhaust pipes are straight back and very close to the Rock Tamers mud flaps part #ERT00108 I'd recommend the grilles part #ERT200 but if they are angled or there's a decent distance the shield #RT76FR is the way to go.

I went out to the warehouse to measure the Curt ball mount #D-28 for you. From the center of the pin hole to the closest end of the shank it is 2-1/2 inches. From the center of where the rise begins is it is 8-1/4 inches. Also, the distance from the…

Sometimes our website does have issues which can be really frustrating but we do have hitches that fit your 2016 Toyota RAV4 like with the Curt part #C13406 which has great towing capacities and since only hitch opening hangs below rear bumper…

The heat shield part #RT76FR that you referenced was designed to prevent the type of damage you have on your Rock Tamers mud flap so this would be best solution. Other option is to have a turn down welded to your exhaust tip so that it is directed…

The Rock Tamers Heavy-Duty, Adjustable Mud Flap System, part #ERT00108 will work with the exhaust on your 2014 Ram truck. I have attached a photo that shows the system installed on a truck with rear exhaust like you said you have. The arms of the mud…

You didn't mention how long of an extension you need, but the part #ST18 will give you 18 inches of extension which sometimes is enough to allow you to tow a trailer with a camper but that depends on the dimensions of the camper. You should note…