Recommended Fixed Ball Mount With 4 to 4-3/4 Inch Rise With At Least 7500 lb Capacity

Question

Question:

I can not find a fixed ball mount w/ a 4inch to 43/4inch Raise Rated at least 7500 lbs in the raise Position

asked by: John R

0

Expert Reply:

For your fixed ball mount with at 4 to 4-3/4 inch rise, I recommend the Curt Dual Length Ball Mount for 2" Hitches - 4-1/2" Rise, 5-3/4" Drop - 7,500 lbs # C45240. This ball mount will also need a hitch ball like # 63845 for a 2 inch option or # 63847 for a 2-5/16 inch option.

I've linked a page to your option for 7500 lbs with that 4 inch or more rise.

expert reply by: Jason S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 4

Hey HPA, I would go with the Air Lift kit part #AL64VJ that fits your 2019 Toyota RAV4 based on what you described and your needs. This gives you adjustable support that you can tailor as needed so that you get the exact amount of support you need…

view full answer...

Answer 5

The ideal height will actually have to do with how tall the coupler of the trailer is from the ground. The Draw-Tite #76020 will sit at 13 1/2 inches from the ground to the top of the hitch when installed on a 2016 Mazda CX-9. From what I could find…

view full answer...

Answer 6

According to my research your 2019 Jayco Redhawk 25R is on a Ford E-450 chassis which means the WeatherTech #WT26DV should be a direct fit for you. I am aware of the vertical kayak carrier that you are referring to but unfortunately we do no offer…

view full answer...

Answer 7

You are definitely on the right track with the SumoSprings. For your 2021 Toyota Tacoma, I recommend using the SumoSprings Solo Custom Helper Springs - Rear Axle #SSR-612-47. The reason why is because this model of SumoSprings will provide your…

view full answer...

Answer 8

Some 2021 Tacoma were equipped with 3 leaves in the springs, some with 4, so you'd just need to take a quick peek at what you have to determine which Timbren kit you'll need, as I have no way to look up how your truck is equipped. For a 4WD…

view full answer...

Answer 9

Those are very good questions and let's start with the capacities of both systems. The SumoSprings Solo Custom Helper Springs #SSR-612-40 has a 500 lb capacity and SumoSprings #SSR-612-47 has a 1,000 lb capacity, which means that is the highest…

view full answer...

Answer 10

I checked with Super Springs and the SumoSprings Solo Custom Helper Springs #SSR-612-40 that you referenced are indeed the correct springs for your 2016 Toyota Tacoma. These are designed to provide you with much better rear suspension support for…

view full answer...

Answer 11

The best solution would be the lightest duty SumoSpring kit part #SSR-612-40 for your 2021 Toyota Tacoma. This will give you just enough support to keep you off of your bump stops without making the ride quality harsh.

view full answer...

Recommended Fixed Ball Mount With 4 to 4-3/4 Inch Rise With At Least 7500 lb Capacity

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching