What Do I Need To Tow A Trailer?
1. Trailer Hitch Receiver
2. Ball Mount
3. Pin and Clip
4. Trailer Hitch Ball
5. Wiring Harness
Kyle L.
4/13/2024
I have a 2024 VW Atlas with the tow package, 2” receiver. I will need to tow a U-Haul trailer. I’m thinking I need a 2” ball hitch and possibly a wiring adapter for the 7 pin setup that comes stock on the SUV?
Jes R.
2/13/2024
I have a 2014 VW jetta. Would I be able to tow a 1996 Jayco 1207 popup and what should I purchase for this?
Mike L.
2/14/2024
@JesR Your popup has an empty weight of 1700 lbs. Your Jetta's exact towing capacity will depend on which engine it's equipped with, the transmission and whether or not the trailer has brakes.
1.8L engines with manual transmissions have a 2000 lb capacity for brake-equipped trailers and 1650 lbs for the auto transmission. Without brakes, it's 1650 for the manual or 1500 for the automatic.
For the 2.0L engine, the tow capacity is 1000 lbs, regardless of the transmission and whether or not the trailer has brakes. It seems kind of strange that the smaller engine would have a higher tow capacity, but we found this info in the owner's manual.
So, according to the owner's manual, if you have the 1.8L engine with the manual transmission. you can tow your pop-up as long as the cargo you add to it doesn't exceed 300 lbs or so which would put you above 2000 lbs. Otherwise, VW doesn't recommend towing that trailer with your vehicle.
In order to tow, you'll need a hitch, a trailer wiring harness, a ball mount and a trailer ball. Here's a listing of what we recommend"
• Hitch, Curt Class I, part # C11474
• Trailer wiring, # C59236
• Ball mount # C45520
• Hitch pin and clip # F-4
• 1-7/8 inch trailer ball # C40002 or # C40018 for a 2 inch ball
Jes
2/14/2024
@MikeL thank you! I have someone with a truck who should be able to help! I appreciate it.
Jason P.
2/9/2024
I have a 2016 Scion Im base model, I am looking for everything I would need to tow a small trailer to get my dirt bike and gear around with me. Any tips or knowledge would be greatly appreciated. Thanks!
Mike L.
2/9/2024
@JasonP We'd be happy to help with that. You'll need a trailer hitch, a trailer wiring harness, a ball mount and a trailer ball.
For the hitch, we'd recommend the US made Curt # C11420. For wiring, use the Curt # C56309. For the ball mount and ball use # C45520 along with # C40001 for a 1-7/8 inch or # C40018 for a 2 inch trailer ball, depending on what your trailer coupler requires.
Brianna
1/18/2024
I have a 2023 Kia Sportage EX and it doesn’t have any hitch system currently installed. I need to tow a uhaul trailer next weekend. Where’s the best place to buy the parts I need while also being mindful of price (I know these things can get expensive)?
Mike L.
1/18/2024
@Brianna I'd recommend the US made Curt # C94WR Class III hitch. You'll also need a trailer wiring harness like # TK32VR. When installed the hitch height of the Curt hitch we recommended is about 15 inches. The average hitch height of a U-Haul trailer is 18-1/2 inches, so we'd recommend a ball mount like the Curt # D-28 along with a 2 inch ball like # 40038. These are all parts we offer, and you can get them by using the links we've hooked you up with below, check 'em out!
Omar
9/8/2023
Hello, I have new 2023 Chevy Suburban V8 4 Wheel Drive, and I'm looking to tow a trailer. I am a complete newbie when it comes to towing. I have the square opening in the back, what else do I need to be able to tow? And advice would be appreciated, thanks!
Mike L.
9/14/2023
@Omar Do you have the trailer connector that's located alongside the hitch? If not, you can add one using # C55664 which would connect to the round connector located behind the rear bumper. If your trailer has brakes, you'll want to add a brake controller like the # C51140. You'll also need a ball mount and a trailer ball of the correct diameter.
Christian M.
8/14/2023
I have a 2019 ram 1500 classic 4x4 crew cab. Looking for the best items I could get prior to try to buy a trailer to live in it. For towing the trailer
Mike L.
8/15/2023
@ChristianM What will you be towing? For a 6K max capacity, go with the etrailer # e98852 Class III hitch. For the highest capacity option which offers up to a 15000 lb capacity, use # C15572. The ball mount you need will depend on the ride height of your truck versus the level height of your trailer. The # 2753 works in most cases, I'll link to an article that explains how to determine the ball mount you'll need. For a 1-7/8 inch trailer ball, use # 19260 or # 63845 for a 2 inch ball. For a trailer connector, use # HM40975 if the truck doesn't already have one.
Laura N.
7/18/2023
I have a 1995 chevy g20 van and looking to buy a camper within the week. Just have no idea what to buy to be able to haul it. Any help would be appreciated. Thank you. Also someone told me aa gooseneck hitch might be my best bet, not sure since I'm new to all this.
Mike L.
7/28/2023
@LauraN Gooseneck hitches are only used on pickup trucks, they wouldn't work on a van. You'll want to go with a frame mounted receiver hitch like # C13016 from Curt. This will fit your 1995 Chevy G20, UNLESS it has the step bumper. You can check out the install instructions using the provided link.
Helpful Links
Amanda S.
6/26/2022
Hi i have a 2018 jeep grand cherokee and am looking to get a hitch. What kind would i need to tow a small motorcycle trailer. I already have the wiring under my jeep. It came with a tow package just not anything but the wiring.
David B.
6/27/2022
Here is a link to our hitch receivers that will work depending on the style of your Jeep. Use the drop down menu to get the right version and it will filter out all the ones that do not work. From there, if you have any questions about a certain hitch, I will give you all the info you need on it!
Helpful Links
Amanda S.
6/27/2022
@DavidB Draw-Tite Class III Max Frame Receiver Hitch - 2018 Jeep Grand Cherokee will this one be eadiest since I am strapped for time on getting one? Does it cone with a plug so i have working lights on my trailer?
David B.
6/28/2022
This will be the easiest to install Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13065. It does not come with any wiring or ball mount, you would need # C45534 and # 118727. Does your trailer have brakes? If it does you will need a brake controller and a 7 way plug too. Let me know and I'll get you those parts too.
Pia Z.
3/16/2022
Hi there, I have a 2020 Chevy Colorado (standard model). I have a receiver, but I plan on hauling a u-haul trailer. What would be your recommendations for which tools to buy to be able to pull it? Thanks!
Les D.
3/17/2022
@PiaZ I would first look up the towing capacity of your Colorado. Check the stickers in the drivers door jamb.
Next, you will need trailer lighting wiring. Does your Colorado have a lighting harness electrical connector?
Next you need to determine if you are towing a trailer that has brakes. If the weight of the trailer plus contents is >3000 pounds then your trailer needs brakes of some kind. If it is a U-Haul trailer it likely has surge brakes and you will only need to connect a 4-way connector. Let me know what kind of brakes your trailer will have.
Bailey R.
8/5/2021
I drive a 2009 Chevy Suburban LTZ It looks like people are leaving their vehicle and you guys are acknowledging what you think they might need. That would be great!! Thank you
Victoria B.
8/11/2021
From what I understand the 2009 Chevy Suburban came from the factory with both a trailer hitch and trailer wiring harness installed. Check out the back of your vehicle and confirm that you have a 2 inch hitch and a 4-Way or 7-Way harness. Depending on if the trailer you are towing has brakes or not, you may need to upgrade from a 4-Way connector to a 7-Way. If this is the case, let me know and we can look into products. You'll also need a ball mount. hitch ball, and hitch pin. The ball mount will need to be the correct rise or drop to tow the trailer level. Check out the article I have linked on how to determine this. The hitch ball diameter will be determined by the size of the coupler on the trailer you intend to tow. If you can let me know the rise or drop you need as well as the coupler size on the trailer, I can point you in the right direction for those products.
Helpful Links
Anthony A.
6/22/2021
Which drawbar do I need for a 2001 Subaru Forester? The tires are 205 65 R 16 and the bumper is about 16.5 inches from the ground. What other measurements do I need? Thanks in advance!
Jon G.
6/24/2021
To choose the correct ball mount you will want to measure from the ground to the top of the inside of your hitch receiver and then from the ground to the bottom of your trailer coupler when the trailer is leveled out. If you can get me those measurements then I can let you know what will work best for you. Attached is a helpful article on measuring for a ball mount that you can check out.
Helpful Links
Justine H.
5/15/2021
My 2005 Toyota RAV4 base has a tow rating of 1500 lbs, so I don’t need a super heavy duty hitch receiver for it. Would a smaller one work fine? I plan on towing a 850 lbs uhaul trailer, but everything I’m seeing seems to be overkill compared to my tow capacity
Jon G.
5/17/2021
Even though they do seem overkill I would still go with a Class III hitch. Reason being that these are a lot more solid and if you end up wanting to use it for a cargo carrier or bike rack having that larger receiver will open up more options for you.
Helpful Links
Lawrence
10/10/2020
I have a Curt #18113 cargo carrier. I would like to know if the light kit E98943-44LED will fit my carrier. If not is there one that will ?
Jon G.
10/12/2020
The brackets that come with the Kit # e98943-44LED won't fit your Curt # C18113. You might be able to get the lights themselves # 98174LED to fit your carrier but you're going to have to cut holes into the carrier. Instead of doing that I recommend going with the Curt Light Kit # C53201.
Kiki G.
10/7/2020
I have a 2017 Jeep Cherokee 4x4 v6 with the active drive II. It has a hitch, I believe aftermarket 2 inch, already on it and I believe it to be aftermarket because it’s not on the build sheet. It has an aux transmission oil cooler and the engine cooler and a trailer sway damping which I thought were all things that would come with a tow package and yet the hitch definitely is not on the build sheet. I want to tow a pop up what else do I need since the hitch is already on and how do I know if this hitch is OK? The former owners took really good care of it it only had 40,000 miles on it and the build sheet is unbelievable with all the extras I just don’t understand why they wouldn’t just put the factory hitch on it along with everything else lol ... I was told that the reason It had such low miles was because they actually towed it behind an RV more than they actually drove it ..,anything you can help me with so that I can get a pop-up hooked up to this baby and start my camping excursions would be wonderful thank you!! Ps I do not have the pop-up yet by the way.
Jon G.
10/7/2020
If you have the factory tow package then the wiring you need is part # HM40975-11933, otherwise you'll need part # 118605. Then what you'll need is a ball mount. I recommend using a weight distribution system (WDS) like the Blue Ox TrackPro # BLU36FR because it will help to keep your pop up camper in-line and your Jeep level while towing.
Kiki G.
10/7/2020
@JonG Wow thanks for the fast reply!! I’ll check this stuff out. Have a nice night
Kiki G.
10/13/2020
@JonG
So we purchased a 2009 coachman clipper that actually has electric brakes ...my brother-in-law bought a Hopkins wiring kit for me...it’s a four pole with a four pole to seven pole adapter and it kept tripping... can you recommend one that’s going to be compatible with my jeep that won’t keep tripping and works with a pop-up that has electric brakes??
Jon G.
10/14/2020
@KikiG What wiring kit did you get? Usually when wiring keeps tripping it's because something isn't installed correctly with the wiring (like a bad ground or loose connection). Also you'll want to utilize the brakes on your trailer so we need to get you a 7-Way that has more functions tied into it than the 4-Way connector like what you currently have. Let me know what wiring kit you have and double check the wiring on both your Jeep and your trailer and we'll go from there.
Jack C.
9/30/2020
Can you use the same trailer hitch set- up from a 2007 Honda CRV and transfer it to a 2017 Honda CRV?
Jon G.
10/1/2020
Those model years differ enough that you will need different parts for either your 2007 or 2017 Honda CR-V. It sounds like you already have what you need on your 2007 model but I'm going ahead and linking our fitguide for both models that you can filter through.
Carl
9/30/2020
My son has a 2018 Jeep Grand Cherokee, not an SRT. What parts would be required to install a trailer hitch?
Jon G.
9/30/2020
Here is a link to our selection of trailer hitches that will fit your son's 2018 Grand Cherokee non-SRT.
Jon G.
9/14/2020
The best option for you is the Tekonsha ZCI # 119250KIT because you just clamp the connections on your OEM wiring and you don't have to cut and splice anything.
Delvin S.
9/1/2020
I was told for newer cars (Ford Explorer) the dealer needs to reset the computer, to allow the harness to work. Is that true? Can I go to Uhual to get that done?
Jon G.
9/4/2020
I know that some vehicles do require you to take the vehicle in to the dealer to have the electrical system "flashed" so that it knows the wiring is connected. I haven't heard that yet about the Ford Explorer but you should be able to call in to your local dealer with your VIN to see if that's a requirement. I'm honestly not sure if U-Haul can do that or not. I was under the impression that it's a dealer-only type of thing.
Ralph
8/20/2020
Thanks for this! Having the right equipment and tools for towing is essential in towing any trailer but it's not enough that you have the equipment for a towing trip. You should also have sufficient knowledge on what to do with your vehicle and your equipment. Most people interchange towing capacity and payload capacity which might be a potential hazard for you. Towing Capacity = Amount you can pull Payload Capacity = Amount you can carry. Have a safe trip!
Jon G.
8/21/2020
Yes, it's always best to consult your tow vehicle owner's manual as well because it will give you specifics when it comes to towing safely.
Darwin N.
8/20/2020
Hello, I got a Volvo V50, I would like to tow a small trailer. Could you recommend me what to buy? Thanks
Jon G.
8/21/2020
You'll definitely need to get everything on the list in this article. If you use our fitguide you can see what hitches and wiring fits your Volvo V50 (I don't have specific recommendations because I don't know your vehicle model year), and then here are links to a ball mount article and our selection of ball mounts, hitch balls, and pin & clip combos that you can look through to make sure everything matches up with your application (vehicle and trailer).
Carol K.
8/12/2020
I have a 2005 honda civic. I'm planning to pull a mini camper around 600 lbs. Do I have to buy all 5 components separately?
Jon G.
8/21/2020
Yes. Here is a link to the fitguide for your 2005 Civic as well as an FAQ for a ball mount and our selection of ball mounts, hitch balls, and pin & clip combos.
Molly F.
8/10/2020
Hi! I have a 2017 Nissan Pathfinder that I will be using to tow my grooming trailer. What do I need to buy to connect the two when the trailer gets here? The builder says the trailer will be a standard rv size 2 5/16”
Jon G.
8/21/2020
1. Trailer Hitch Receiver - # 76031
2. Ball Mount (checked out FAQ and linked selection)
3. Pin and Clip - # e98882
4. Hitch Ball (check out linked selection - just match shank size to what is found on your ball mount)
5. Wiring Harness - 4- Way # 118670 OR 7-Way # 118273
Adrian
3/17/2021
@JonG How much weight can a 2014 nissan pathfinder support/ tow? It already has a ball/ hitch. I'm considering buying an RV but am thinking I may need a different vehicle to pull it.
Jon G.
3/18/2021
@Adrian It looks like the most you can tow with a 2014 Pathfinder is 5,000 lbs but you'll want to confirm that in your version of the owner's manual. Unless it's a smaller RV you're probably going to need a different vehicle.
Sarah F.
8/5/2020
I have a 2018 RAV4 xle AWD. I plan to tow a <1000 camper with a 4 pin electrical attachment and a 14.5 inch tongue height. Could you tell me what I need?
Rohit
7/28/2020
I have a 2018 Mustang GT and I recently bought a 2018 Harley Forty Eight. I’m planning to install the towing receiver so that I can rent trailers from uhaul to haul my motorcycle with my mustang. Can I please get the list the items I need to purchase to make this happen. I appreciate any help. Thank you!
Chris R.
7/29/2020
Starting with a trailer hitch the Draw-Tite Class I # 24928 will work well. It features a 2,000 pound towing weight capacity although you'll want to verify the Mustang's limits as well that should be listed in the owner's manual. For wiring I recommend the Tekonsha # 118487, which will plug in-line behind the tail lights to provide a 4-Way to power the trailer's signal lights. For the right ball mount/hitch ball combo you will want to compare the trailer height to the hitch height on the Mustang - I've linked an article below to assist.
Helpful Links
Rohit
7/29/2020
@ChrisR thank you so much for your valuable information. I ended up buying #C11405 and #C56088
Please let me know if I need to change my order? Thanks in advance!
Joy
7/25/2020
I have a 2019 GMC 1.5L AWD Terrian. What do I need to buy to tow a 4'x8 trailer? Thank you
Chris R.
7/29/2020
For your 2019 Terrain you will need to start with a hitch for which I recommend the Curt # C77FR. From there you'll add a trailer wiring harness and assuming the vehicle is equipped with the factory tow package, the Curt # C94FR will work perfectly. This will provide you with a 4-Way connector to power the trailer's basic signal lights. Then you just need to add a ball mount and hitch ball - I've linked an article below to assist.
Helpful Links
Jake H.
7/22/2020
I have a 2018 Jeep GC without the tow package. I am 95% certain I have the wiring harness pre-sintalled (got Jeep in Nov 2017, and they stopped adding the wiring harness mid 2018). I have got the hitch receiver, and the ball/mount needed. what else would be needed. I will be towing a camper with brakes. I got the wireless brake system that goes into the 7 way connector from my camper dealership. I am thinking I would just need the 7 way adapter that I would plug the camper into, on top of the hitch receiver, and pre-installed wiring harness?
Chris R.
7/24/2020
If you have the factory 4-Way on your Jeep, you'll just need to convert that to a 7-Way to hook up with the trailer (and work with the brake controller). To do this I recommend using the Wiring Kit # ETBC7L. This kit includes the adapter itself along with the extra wiring needed to activate the 12V circuit for the controller.
Jake H.
7/24/2020
@ChrisR If it was factory pre-installed is it always the 4 way and not the 7? I just want to ensure when I bring it to the dealer to get the hitch receiver installed I have all the parts. It has been a mess trying to get it installed. They claimed they had everything needed at the service center aside from the hitch receiver which was backordered until September (I got one off eBay). They have never laid eyes on my Jeep so wasn't sure if there was a way to ensure if I have the 4 or 7 way pre-installed when I look under the Jeep. (There is a covering on the end of the harness).
Chris R.
7/29/2020
@JakeH Actually for your 2018 model Jeep Grand Cherokee it SHOULD be wired with a 7-Way from the factory (if it does indeed have a factory connector). It looks like the Jeep would either have a factory 7-Way or no connector at all. You can physically look under the bumper to see if there is a connector present. If there's nothing there you'll actually need to start with a 4-Way (before adding the # ETBC7L Kit), for which the Tekonsha # 118727 will work perfectly.
Rahul
7/21/2020
I recently installed a Curt 57000 to my rear bumper, close to where the factory harness allowed me to connect. I am a little worried that it's too far off-center for future connections with common types of trailers. Is this something to worry about or am I ok? It's 1-1.5 feet from the hitch receiver (looking at the back of the truck, it's on the right hand (passenger side).
Chris R.
7/24/2020
You should honestly have enough slack on the trailer plug to make this connection, regardless of the trailer. I think you're good to go!
Samantha
7/17/2020
Hello! I have a Ford f150, with a hitch and a plug for electrical but no other words or connectors. What else would I need to tow a camper? Thanks!
Chris R.
7/20/2020
It depends on the type of trailer you're planning on towing. Do you know if it will be equipped with electric brakes? If not, you pretty much have everything you need other than a ball mount and hitch ball (I've linked an article on this below).
Helpful Links
Jimbo
7/16/2020
I have a 2018 Volvo V60 Cross Country and hope to buy a Scamp 16 sometime in the near future. I am thinking I need: Class III Trailer hitch, 7 plug wiring harness, Brake controller, Mobile Towing scale, transmission cooler, air bags and weight distribution hitch. Anything else? Recommendations for products? Thanks!
Chris R.
7/20/2020
Other than a ball mount and hitch ball so you can actually hook up to the trailer, this sounds like a perfect setup. For the Class III hitch I recommend the Curt # 13266 and for a wiring harness I like the # C56287. From there you will need to upgrade it to a 7-Way to use with a brake controller. I specifically recommend using the Wiring Kit # ETBC7L and Curt Echo # C51180. Now as far as the rest, there aren't any air bags available for your Volvo and it doesn't look like the vehicle is rated for WD systems, so you'll have to do without these. Scamp trailers are pretty light though, so I don't think you'll have any issues.
Tracy M.
7/15/2020
I have a 2008 Ford Explorer Limited V8 AWD with the small, standard bike rack hitch. From the specs on the vehicle, I have a tow capacity of 7,000 lbs. I need to pull a travel trailer (Springdale 189FL) that is approximately 23 ft long (hitch to tail) and weighs 3500 lbs dry. Can you tell me what hitch/accessories I would need for this? Do I need to remove the smaller hitch before install? Thanks in advance.
Chris R.
7/20/2020
What size hitch is currently on the Explorer (1-1/4" or 2")? As long as it's a 2" receiver there shouldn't be a need to replace it. I believe all the Explorers came equipped with a 7-Way connector. If that's the case, the only other thing you need (other than a ball mount) is a brake controller if the trailer has electric brakes. I really like the Curt Echo # C51180, which will plug right into that 7-Way connector.
Tracy M.
8/2/2020
@ChrisR Thank you for the response. I have a class 2 hitch, 1 1/4" currently on the vehicle. It's a FoMoCo 7L2A-19D534AA. I apologize for my ignorance, I am new to mid-sized SUVs and towing. When I purchased the vehicle, I checked the tow rating specifically because I knew I needed to tow a small trailer/camper and didn't really inspect the hitch. That is my error. Am I stuck with what I have?
Jon G.
8/6/2020
@TracyM You will actually be able to install an aftermarket hitch with the 2" receiver, like the Curt # 13112, which fits under your OEM 1-1/4" hitch.
Helpful Links
Victor
7/15/2020
I’m looking into towing with my Dodge Challenger 2015 but was curious would I need a special trailer hitch to avoid the trailer or hitch from hitting the ground?
Chris R.
7/20/2020
There isn't a special hitch available for your Challenger that offers greater ground clearance (since the receiver is always going to sit just under the bumper). When we installed the Draw-Tite # 76145 we measured a distance of about 9-1/2" from the ground to the top of the receiver. You will just need to be careful when backing out of the driveway, etc.
Shelby P.
7/8/2020
I have a 2017 Honda Pilot, without tow package. I would like to tow a 3000lb travel trailer. I have already had a Curt Hitch installed, but wondering what I need as far a wiring goes. Is this something I can DIY? Thanks!
Chris R.
7/13/2020
If you don't have any type of harness connector on the Pilot you'll need to add a 4-Way connector. I recommend the Tekonsha # 118760. This just plugs into factory ports behind the driver's side trim panel so it can definitely be done in your driveway. This will be enough to power the trailer's signal lights, but if it has electric brakes you'll need to upgrade this to a 7-Way connector and add a brake controller. For this I recommend using the Wiring Kit # ETBC7L and the Curt Echo # C51180.
Michele W.
6/29/2020
I am looking to add a tow package to my 2013 VW Tiguan. I'll be using it for hauling an 8 ft utility trailer and sometimes a cargo carrier. Which products will be the easiest to install, as family will be helping, but also sturdy?
Chris R.
7/3/2020
Starting with the hitch, I highly recommend the Curt # C13133. It requires some minor fascia trimming during installation but it's otherwise a simple bolt-on application to existing holes in the Tiguan's frame. Then for a wiring harness to power the trailer's lights, I recommend the Tekonsha # 118675, which will plug in-line behind the tail lights. Finally for a ball mount the Curt # C45030 should work well with the appropriate size hitch ball (which will depend on what your trailer accepts).
Thomas C.
6/17/2020
Hi,I have 07 jeep patriot and I'm looking to pull a job boat ,aluminum 12' . Looking for trailer hitch attachment. It seems my muffler hangs a bit lower than normal.Anyway you can send me exact dimensions? If necessary? Thanks.
Meg S.
6/17/2020
I just purchased a 2020 nucamp T@G 5 wide and am a new camper owner. I have a 2019 Honda CRV and would like to know what I need as far as a tow package. Thank you so much in advance!
Chris R.
6/21/2020
You'll need to start with a hitch for which the Draw-Tite # 76128 will work perfectly. Then for wiring I recommend the Tekonsha T-One # 118741 for a simple plug-in installation. This will provide you with a 4-Way connector to power the trailer's signal lights. Based on my research, it looks like the T@G is equipped with electric brakes - if this is the case you'll also need to upgrade it to a 7-Way and add a brake controller. For this I recommend the Wiring Kit # ETBC7L and the Echo Brake Controller # C51180. Lastly you'll need a ball mount and hitch ball. The etrailer set # EBMK4 is a really nice option.
Jerome
6/17/2020
I have a 2020 Lexus GX460 and I need to tow a small Uhaul trailer what do I need to get because I have no experience with this and I can't find a straight answer online anywhere?
Chris R.
6/21/2020
Assuming the small trailer isn't equipped with brakes, you'll just need a hitch, a 4-Way wiring harness, a ball mount, and hitch ball. For the hitch I recommend the Curt # C13043 and for the harness the Tekonsha # 119250KIT will work well with the sensitive factory wiring on your Lexus. The Curt Ball Mount # C45030 with pin/clip # C21500 should be a good fit with that trailer. Then it's just a matter of getting the right sized ball (which depends on what size the U-Haul coupler accepts. Most likely it's a 2' # 63845.
Megan K.
6/15/2020
I have a 2015 Dodge Journey sxt 2wd the larger engine of the 2 versions. I need a whole hitch package for pulling a small uhaul trailer. Which hitch do I buy? I have no experience with this, but I am good at figuring out how to put things together.
Chris R.
6/16/2020
For your 2015 Dodge Journey SXT the etrailer # e98845 will work perfectly. It offers a simple bolt-on installation and features more than enough capacity for a small U-Haul trailer. Then for a wiring harness to power the trailer's signal lights I recommend the Tekonsha T-One # 118536 if the Journey has LED tail lights or # 118567 if it has incandescent bulbs.
Arshia
6/15/2020
Thank you for the educative article. Can I tow a trailer with a limited hybrid Rav4 2017? I am reading different answers online for this question. The manual for non hybrid Rav4 says it is not recommended. I could not find the the answer for a hybrid one. Thank you.
Daniel
6/12/2020
Hello, I have. 2019 armada and want to know what to install to tow a RV (7000lb)? Thanks
Chris R.
6/16/2020
Your Nissan Armada should already be equipped with a trailer hitch, so you should just need a wiring harness and brake controller (along with the right ball mount and hitch ball). If your Armada doesn't didn't come with a 7-Way connector at the bumper (check to be sure because many do) you'll need to start with a 4-Way harness # 119147KIT. Then to add the brake controller I recommend, the Curt Echo # C51180, you'll need to use the Wiring Kit # ETBC7L to upgrade it to a 7-Way. I've linked an article below that details how to choose the best ball mount for your setup.
Pedro G.
6/5/2020
Hello - FORD ESCAPE V6 2011. Can you recommend a 5 components tow package that will fit? I am moving and need to know what's needed tow a UHAUL. Brochure says max towing capacity is 3,000 lbs. Thanks for your help !
Chris R.
6/8/2020
Sure can! Starting with the hitch I recommend the Draw-Tite # 75751. I've linked a full install video below. From there the Tekonsha Wiring Harness # 118551 will work perfectly. For a ball mount the Draw-Tite # 2923 should work well (pin and clip are included). You'll then just need to verify what size hitch ball the trailer coupler accepts - most likely a 2" like # 63845 but I recommend checking to be sure.
Helpful Links
Dayana S.
6/4/2020
I have a 4door 2019 Jeep Wrangler and am looking to tow a jetski trailer with lights. What equipment would i need to install onto my jeep to do this?
Chris R.
6/8/2020
If you don't yet have a hitch installed you'll need to start there. For your Wrangler I recommend the etrailer # e98856, which features a longer receiver tube to provide clearance with the Jeep's rear spare tire. From there you'll need a wiring harness to power the trailer's signal lights. I specifically recommend the Tekonsha # 118786. Then you just need a ball mount and hitch ball for the physical connection. The Curt # C45030 should work well.
Leah
6/3/2020
We are renting a small teardrop trailer next weekend. We have a 2012 Subaru Outback. What do we need to tow this safely? It has a dry weight of 350 lbs.
Chris R.
6/4/2020
To tow a small camper with your Outback you'll just need a hitch, wiring harness (to power the trailer's lights), and a ball mount/hitch ball combo. For the hitch I recommend the Curt # 13390 and for a wiring harness the Tekonsha # 118467 will work perfectly for a simple plug-and-play installation. The Curt Ball Mount # C45030 should work well with the appropriate hitch ball (whichever size the teardrop uses) - either a 1-7/8" # C40002 or 2" # 40038.
Sidney J.
6/1/2020
I have a 2018 subaru outback and want to tow a pop up with a 7 way plug. Do I need to get a 4 way plug and a 7 way adapter or can I just install a 7 way plug?
Chris R.
6/4/2020
You could technically just install a 7-Way connector on your Outback but it'll require a lot more hardwiring/splicing than starting with a 4-Way and going from there. Because of this I highly recommend that you go that route. For the custom 4-Way harness, the Tekonsha # 118467 will work perfectly and is a plug-and-play install. From there, if your pop-up isn't equipped with electric brakes, an adapter like the Curt # C57672 is all that you need to convert it to a 7-Way. It'll plug right into the existing 4-Way and the additional wires (except for the white one that needs to be grounded) can simply be capped off. Let me know though if the camper does have brakes.
David
5/24/2020
2013 Acura MDX - I am looking to rent a pop-up camper next weekend. I have the Curtis trailer hitch already installed but no wiring or ball mounts and u don’t know anything about the pop up trailer yet to know heights. What would you suggest?
Chris R.
5/27/2020
For wiring, the Tekonsha # 118424 will work perfectly. This custom harness will plug right into a factory port behind the driver's side trim panel at the rear of your Acura MDX. It'll provide you with a 4-Way connector to power the pop-up's signal lights. A modest ball mount like the Curt # C45030 will probably be sufficient, but it wouldn't hurt to call the dealer you're renting the pop-up from. They should be able to tell you the trailer's height or help with picking out the right unit.
Jonathan K.
5/14/2020
I have a 2015 Jeep Patriot and would like the full tow setup suggestion. I would be towing 2 jet skis mainly.
Chris R.
5/16/2020
I can do that! Starting with the hitch I recommend the etrailer # e98836, which offers a sleek hidden-crosstube appearance and will bolt right up to the frame rails of your Patriot using existing holes (no drilling). For a wiring harness the Tekonsha T-One # 118552 will work perfectly. The custom harness will plug in-line behind the tail lights to provide you with a 4-Way connector to power the trailer's signal lights. The Curt Ball Mount # C93KR should work well along with the right size ball for your trailer - either a 2" # 40038 or 1-7/8" # C40051.
Jorge V.
5/3/2020
Que kit completo necesito para kia soul 2016 What complete kit do i need for kia soul 2016
Chris R.
5/6/2020
Starting with the trailer hitch, the Curt Class I # C11419 will work perfectly. Then for a wiring harness I recommend the Tekonsha # 118637, which will provide you with a 4-Way to power the trailer's signal lights. Lastly for a ball mount the Curt # C45521 will work really well with either the 1-7/8" # A-80 or 2" A-82 Hitch Ball (depending on what the trailer accepts).
Erik D.
4/29/2020
I would like to tow a 12ft Fishing Kayak on a 2012 Nissan Rogue. Can you tell me all the proper towing equipment I will need. I currently have nothing attached to my Rogue and I have not purchased the trailer for the Kayak yet either not sure if that makes a difference or not. Thanks!
Chris R.
4/30/2020
Starting with the trailer hitch, the etrailer # e98846 will work perfectly. Then for wiring I recommend the Tekonsha # 118480, which will provide you with a 4-Way connector to power the trailer's signal lights. Lastly you will need a ball mount and hitch ball - this is where the best option depends on the actual trailer you end up going with. I linked a great article below that explains how to choose the right one.
Chris
4/25/2020
Quick question! I drive a 2015 Subaru Impreza hatchback and I wanted to tow a single axle jet ski with it. What would be a proper towing setup for my vehicle? The trailer uses a 2” ball.
Chris R.
4/27/2020
Starting with the trailer hitch, the Curt Class I # C11286 will work great (as long as your Impreza hatchback has the single exhaust). Just make sure the loaded trailer weighs less than 2,000 pounds. For a wiring harness the Tekonsha # 118573 is perfect and if the jet ski trailer happens to have a 5-Way connector (instead of a 4-Way) you can add the Adapter # 20036. Lastly for a ball mount and hitch ball the Curt # C45521 with 2" Ball # A-82 should work really nicely.
Melandie
4/24/2020
Please Help!!!!I have a 2009 Infiniti FX35 and I would like to tow a trailer what attachments do I need?
Chris R.
4/25/2020
I can definitely help you out. For your 2009 Infiniti FX35 the Curt Class III Trailer Hitch # 13554 will work perfectly. Then for wiring (to power signal lights on the trailer) I recommend the Tekonsha T-One # 118593. Lastly you'll need a ball mount and hitch ball to actually hook up to the trailer - the Curt Ball Mount # C45030 will work really well.
Helpful Links
Show All (54) Replies
Hide Replies
Explore Expert Info
![Our Expert]()
on Trailer Hitch
on Trailer Hitch
Videos
for Trailer Hitch
Help Articles
for Trailer Hitch
Expert Answers
for Trailer Hitch
Most Popular Trailer Hitch Videos
Most Popular Trailer Hitch Articles
Most Popular Trailer Hitch Expert Q&As
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
view full answer...I recommend using the Curt Lock Set #C23556 for your Curt Adjustable 2-Ball Mount #C99NR. This comes with a lock for the hitch receiver and one for the ball mount platform. Even though your platform uses 2 pins, only 1 locking pin is needed to…
view full answer...For your 2013 Toyota Sienna I recommend the Tekonsha P2 Brake Controller, part #90885. This is a proportional brake controller and is our most popular because it is easy to install and use. I also recommend the #ETBC7 you can install on the rear of…
view full answer...When towing, the trailer should always be as level as possible. A level trailer will put less strain on the connection between the trailer and hitch. It will also help the trailer stay in line behind the vehicle. I have attached a couple of helpful…
view full answer...The Rhino-Rack Artificial Rain Gutters #739A are a universal fit since you'd be drilling through the wall of the trailer and bolting them in place. The only issue you might have is just with the bolt length. If the wall is too thick then…
view full answer...To route the trailer wiring connector outside on your 2011 Toyota Sienna you will need to find a grommet in the rear of the vehicle. I attached a photo showing a grommet that can be used in the cargo area of the 2011 Sienna under the carpeting. We…
view full answer...Basically a lot depends on what you will be using the hitch for. If it is just for accessories such as a bike rack or cargo carrier than for the most part you will be fine with a Class II trailer hitch. If you will be towing then I would go with the…
view full answer...I took a look at the online owner's manual for your 2013 Mercedes-Benz ML350 and found that the vehicle has a 529 pound tongue weight capacity and a 6,613 pound towing weight capacity. I highly recommend verifying this information in your copy of…
view full answer...A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
view full answer...I would be happy to recommend everything you will need to add a 7-way connector and trailer brake controller to your new 2021 Toyota Sienna. First you will need to have a 4-way connector installed of which I recommend the Curt Powered Tail Light…
view full answer...Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…
view full answer...If the OEM hitch on your 2015 Dodge Durango took the brunt of the damage to the point the safety chain loops were bent then that leads me to believe there could very well be other damage to the hitch and you'll want to look for places where the…
view full answer...Departments
Towing
- Trailer Hitch
- Fifth Wheel
- Gooseneck
- Towing a Vehicle
- Front Hitch
- RV Hitch
- ATV Hitch
- HD Truck Hitch
- Vehicle Wiring
- Brake Controller
- Ball Mounts
- Weight Distribution
Sports and Recreation
Trailer Parts
- Utility Trailer
- Boat Trailer
- Landscape Trailer
- Enclosed Trailer
- 5th/Camper Trailer
- Car Hauler
- Horse Trailer
Vehicle
Contact & Help
What our customers are saying:
"Easy place to shop. Fast delivery and great products. Very happy with my purchase."
Ed
Boynton Beach, FL
Popular Vehicles
- Subaru Forester
- Ford F-350 Super Duty
- Ford F-250 Super Duty
- Chevrolet Silverado 1500
- Jeep Wrangler Unlimited
- Jeep Wrangler
- Ram 3500
- Toyota Highlander
- Ram 2500
- Chevrolet Silverado 2500
- Subaru Outback Wagon
- Chevrolet Silverado
- Dodge Ram Pickup
- GMC Sierra 2500
- Ram 1500
- Ford F-250 and F-350 Super Duty
- Jeep Grand Cherokee
- Toyota Tacoma
- GMC Sierra 3500
- Toyota Tundra
- Ford Escape
- More >>
- Jeep Cherokee
- GMC Sierra
- Toyota RAV4
- Nissan Rogue
- Dodge Grand Caravan
- Toyota Sienna
- GMC Sierra 1500
- Honda Odyssey
- Chevrolet Equinox
- Chevrolet Silverado 3500
- Ford Explorer
- Chrysler Town and Country
- Ford F-150
- Jeep Liberty
- Nissan Murano
- Ford Edge
- Subaru XV Crosstrek
- Hyundai Santa Fe
- Chevrolet Silverado New Body
- Ford F-250 and F-350 Heavy Duty
- Kia Sorento
- Chevrolet Traverse
- Dodge Journey
- Acura MDX
- Honda CR-V
- Chevrolet Silverado Classic
- Jeep Patriot
- Ford Focus
- Acura RDX
- Honda Fit
- Ford Fusion
- Ford Flex
- Honda Pilot
- GMC Acadia
- Toyota Prius
- Dodge Durango
- Nissan Frontier
- Nissan Pathfinder
- GMC Terrain
- Honda Accord
- Volkswagen Jetta
- Kia Soul
- Dodge Dakota
- Chevrolet Cruze
- Chevrolet Sonic
- Mazda 3
- Toyota FJ Cruiser
- << Less
Amy
4/26/2024
I have a 2022 Honda Civic Sport. I would like to tow a tent trailer. What do I need on my car to be able to do this. When I bought the care new, I did not add any sort of tow package. Can you tell me what I would need to buy and get installed?