Ball mount measures 7-1/2" or 10-1/2" from center of hitch pin hole to center of ball hole, depending on which pin hole you use. Black powder coat resists corrosion. Use in either drop or rise position. Hitch pin and clip sold separately.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
What's up everybody Adam, here with etrailer. Let's take a look at this Curt ball mount. So, this ball mount is gonna give us a drop of about 2 3/8". And it's gonna give us a rise of 1". Does not come with the ball, so just grab whatever size you need, just to make sure it can fit through a hole with a diameter of 1". We have a lot of them, so grab the appropriate one.
It's gonna give us a gross trailer weight capacity of 7,500 pounds, and a tongue weight of 750 pounds. The nice thing about this one is we have two different holes. So one, the one from the back, from the center of this, to the center of our ball is gonna be about 10 1/2". But when we take this out, we can kind of push it up a little bit. But if you have a spare tire, like I do, we're not really gonna get it all the way to there.
So, we're gonna have options. But if you do use that other hole, it's gonna be about 7 1/2 from the center of that hole to the center of our ball. So you can keep it real close to your vehicle, or leave it out. I like having the option, I think that's really nice. Another thing that's nice about this, we have a hollow shank.
So with hollow shanks, we can put an anti-rattle device on the inside. We're gonna have to buy a hitch pin and clip anyway. So might as well just get the kit that comes with the anti-rattle device, because whenever I'm mowing trailers and stuff, it's usually hot outside, and the window's rolled down, and I can really hear this play. So with the anti-rattle device, we're not gonna have to worry about it. So might as well just grab one, and it's a little bit of cost that'll just save you a lot of headache whenever you're going down the road, and all of your components aren't gonna feel it either.
So definitely recommend doing that, and might as well grab a lock port too, because you saw how quick it was, maybe a couple seconds. And someone can steal your ball mount. So I've had one for a very, very long time and it gets the job done. So if you did want to kind of upgrade, since this is kind of the entry level ball mount, I would recommend just kind of grabbing a shock absorbing ball mount. The Gen-Y Glyder is a good one, just because when you use them, you're gonna use them for a long time. Might as well spend the extra money to get a little bit smoother of a ride. But if you're just hauling some standard trailers, no heavy duty stuff, and you're not really looking for anything special, this is gonna be a great option for you. It's made of steel, powder-coated finish and that's basically it. There isn't a whole lot when it comes to ball mounts. This comes down to the rise, or the drop. And just if the ball that you want is gonna fit in there. So, just take all that into consideration, but that's basically it for our look at the Curt ball mount..
Average Customer Rating: 4.8 out of 5 stars (135 Customer Reviews)
Ball mount measures 7-1/2" or 10-1/2" from center of hitch pin hole to center of ball hole, depending on which pin hole you use. Black powder coat resists corrosion. Use in either drop or rise position. Hitch pin and clip sold separately.Quality product. I needed a longer mount for my side by side and this will work well.
This product served me very well. I wanted a longer fit in my receiver than the one I had. This worked great on the inside hole. I did have a problem with the hitch hitting my spare tire at this location which required me to cut about 3/4" off of the back side of the hitch.
This is exactly what I needed for the hitch on my Grand Caravan. The hitch on the vehicle is set back and this extended length ball mount keeps the trailer tongue away from the van's plastic fascia.
this hitch works great, don't have to worry about denting my tailgate!
Did my research for ball height and this ball mount fit the bill.
Want to thank you for a great product. I needed a product with a longer shank and the two hole shank is a bonus, this is on the back of a Ford F-150 that pulls a boat or Harley trailer. Thanks again
Very pleased with this product, and extremely pleased with the great services that etrailer provides, items arrive timely and are priced reasonably.
Nice hitch, the extra length is great for towing my trailer
Better than I expected. very heavy just what I needed. The service was fast and very high quality as always.Thank
steve j - 03/16/2023Everything delivered as ordered. Shipment tracking information was accurate and helpful.
Received as described and on time.
Very good web site to order from.
Very fast shipping.
Very good instructional videos.
as expected
Best and fastest service I've ever had from an online store.
Packed Excellent!! Shipped Fast!!
Showed up very fast. Just what I needed
Easy to order
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.