Replacement Drill Attachment for Trailer Valet XL, V2, or MV PRO Trailer Dolly
(166 reviews)
Price: $31.99
In Stock
Replacement Drill Attachment for Trailer Valet XL, V2, or MV PRO Trailer Dolly
Item # TVDA
Retail:$50.99
Our Price: $31.99
You Save: 37%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (166)
- Q & A (0)
- Videos (2)
- Photos
Trailer Valet Accessories and Parts - TVDA
- Trailer Dolly
- Trailer Dolly Parts
- Drill Attachment
- Trailer Valet
Replaces the drill attachment on your Trailer Valet XL, V2, or MV PRO trailer dolly. Can also be added to a Trailer Valet 5X so that you can use a cordless drill (not included) in place of the hand crank.
Features:
- Replaces the drill attachment on your Trailer Valet XL, V2, or MV PRO trailer dolly
- Fits models: TVXL2, TVXL25, TVXLV2, and TVMVPRO
- Can be used with your Trailer Valet 5X swivel jack trailer mover (STC-V211) in place of the hand crank
- Allows you to use an 18-volt cordless drill (not included) to power the drive system
- Will fit either 3/8" or 1/2" drills
- 1-Year limited warranty
TVDA Replacement Drill Attachment for Trailer Valet XL, V2, and MV PRO Trailer Mover Dolly
Video of Replacement Drill Attachment for Trailer Valet XL, V2, or MV PRO Trailer Dolly
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Trailer Valet Carts and Dollies TVDA Review
Today we're going to take a look at the replacement drill attachment for the Trailer Valet XL trailer dolly. This part will replace the drill attachment on your Trailer Valet XL trailer dolly. It is designed to fit the models TVXL2 and TVXL25. Now, it can be used with the Trailer Valet 5X swivel jack trailer mover. We sell that separately on our website, it's part number STC-V211 and you can use this in place of the hand-crank on that model. This basically will allow you to use a cordless drill to power your drive system.
That should do it for the review on the replacement drill attachment for the Trailer Valet XL trailer dolly.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Product did not meet expectations
- Alternate product found
- etrailer mistake
Customer Reviews
Replacement Drill Attachment for Trailer Valet XL, V2, or MV PRO Trailer Dolly - TVDA
Average Customer Rating: 4.5 out of 5 stars (166 Customer Reviews)
Replaces the drill attachment on your Trailer Valet XL, V2, or MV PRO trailer dolly. Can also be added to a Trailer Valet 5X so that you can use a cordless drill (not included) in place of the hand crank.by: Alan10/26/2022
I purchased my trailer valet and drill attachment a year ago so that I could move my 20’ camper and jetskis easier. As a disabled vet moving the jetskis into my backyard via a gate to the main road was time consuming and took me an hour. Now it takes me 5-10 minutes. I store my trailer to the front of my home and wanted to make it harder to steal, but had no way to get the front of it close to my fence. With the trailer valet I am able to disconnect from my truck and move it into place within 15 minutes. This is a game changer for me because I can do it by myself and my trailer and jetskis are safely stored without much fuss. I often get asked how I move the front of my trailer so close to my fence. The trailer valet is the best thing I could have purchased. I can get in and out of tight spaces without hurting myself and without anyone else needing to help me.
by: Jack 04/08/2024
For us, it's not a "replacement" (except for my rotator shoulders)
Hope it works;
Mechanical, it fits our 5X, and we'll SOON see how it works with a massive drill
by: William 11/18/2023
This attachment works well. It is not difficult to use BUT one MUST be careful to keep the brake handle fully in the release position or one CAN break a wrist while using a drill motor - which is not the fault of the attachment.
by: Gregory 10/04/2023
This part in itself is great, but the Valet itself not so much. I have the Valet attached to a trailer parked on grass. The tread of the tires are equivalent as street tires on icy roads. The Valet is as designed when on packed dirt and asphalt.
by: Malcolm 09/07/2023
Works as described/designed. Probably should be included in the purchase price of the trailer valet or even simpler make the attachment point universal rather than proprietary.
by: James 09/11/2023
The uspc tracking is a little deceiving. It did not show as received for several days, it did however ship in a timely manor (about a week)
The trailer valet adaptor is of nice quality and works very well. Even though it is overpriced in my opinion.
by: Timothy 08/28/2023
Works great with drill, just be very very careful not to let brake handle on valet engage, guaranteed you’ll lose a big chunk of skin on your hand when the drill spins on you…
by: George05/24/2023
I am glad I bought the trailer valet unit. It has made getting our travel trailer in and out of our garage a lot easier. I would say that using the drill option for moving the trailer is useful, but the torque can hand you with some surprises, so you need to think ahead as you use that option. One useful hint: take the regular handle off before using the drill. In general, this device has worked well for us.
by: Rodney03/18/2024
Did'nt work well with my 20v Drill
by: William01/10/2023
Tried everything to try and make the trailer valet xl work. I tried communicating with the company representative but ran into dead ends. etrailer tried to help but they didn’t manufacture the unit. This was supposed to move up to 10k pounds but not even close. Every time a boat and trailer was tried to be moved on flat concrete the torque would just pull the unit up under the trailer or just pull out of the trailer tongue. I was able to move one boat , it weighed 1500, far from the advertised weight. I now just takes up space
by: Bob07/20/2023
It does not work with the original Trailer Valet. It will not fit the square drive
by: Scott 02/08/2024
Works perfect very happy
by: Jose 09/11/2023
Good match for 5x valet trailer.
by: Charlie J. Hogue III01/18/2024
Candra G was great ?? I have the order in hand and I'm on track with my schedule. Thanks guys.
by: Patrick 05/27/2023
Put this in your cordless drill and move your trailer with ease!
by: Michael P.04/11/2019
I have an extremely narrow area that I cannot back up my boat between the side of my house and fence. My truck cannot make the turn required and it is slightly uphill. With the drill attachment and my 18 volt brush less drill moving the boat into place using the Trailer Valet is an easy task that I could not do without this device. It was the deciding factor that allowed me to purchase the boat.
by: Randall01/11/2023
In the write-up of the Trailer Valet XL, it was unclear whether this device was included or not. It was. So I wasted my money ordering this, but I needed to use the Valet as soon as I received it, so I couldn't take the change of having to order one later.
by: Dennis07/28/2023
I did try it on gravel. It worked ok. I did use my drill, but it wasn't totally charged. Next time it will be totally charged.
by: Frederick 08/09/2023
Great service,quick delivery
by: Bruce 03/30/2023
power tools are always a better way than hand cranking.
by: Edward 07/13/2023
Does what it is suppose to do.
by: Troy03/18/2018
This review will be for not only the Trailer Valet attachment, but for the Trailer Valet as well.
The good: works well on cement and with the attachment I don't have to push my boat into my garage (it has a slight incline at the entrance). E-Trailer is excellent for customer support! I had a couple of minor issues and they were really on top of getting me help.
The not-so-good: I've heard the Trailer Valet doesn't perform on grass or gravel. The attachment is made specifically for the Trailer Valet and you will not find another socket to work. Too bad the company chose to make extra money ($45) for a $5 part. On the Trailer Valet the bushings needed lubrication after one year because it started grinding. A simple fix but until I raised this issue the company did not have a video on how to do this maintenance. You will have to purchase ring clip pliers for this job.
by: Robert01/10/2019
I've used my Trailer Valet to move my 20' enclosed utility trailer around the driveway.
I've also used it to move my 30' camper around, putting planks down on the lawn to run the Valet across. It works good, but is quite a workout with heavy trailers. In confined spaces, there's just no other way to do the job. I would like to have my original Valet adaptable to the newer, "universal ball-mount" style so I wouldn't have to buy a new unit and just set aside the original unit. The new "ball-mount" Valet would greatly simplify using the Valet. Overall, I'm pleased with the quality and operation of my original unit.
by: Ervin09/21/2020
I bought the 5X Trailer Valet for my Jayco Pop UP camper. My driveway has a short but steep incline. I had been wrestling with the camper by moving it a few feet at a time with strategically placed wheel chocks. And what resembled a strong man competition to turn it around into the garage. Although the 5X is quite bulky it works remarkably well. I bought the drill attachment to "motorize" the 5X. There is a bit of a learning curve, between the combination of the tiller handle and the drill motor. The hand crank works surprisingly easy. The tires arrived with 10 lbs. PSI. The manual says tire pressure should be 85 lbs.. Defiantly check this out before applying tongue weight. All in all the 5X does the job.
by: Kent06/02/2022
so far this unit looks to be great and exactly what I needed. Since I am getting older I am trying to do everything I can to make my RV'ing and trailer life easier. I pull a cargo trailer behind my 5th wheel. The trailer Valet will allow me to hitch the 2 up much easier. It also allows me to park my 5th wheel in my back yard and my cargo trailer next to it without having to be hooked up to my truck. etrailer recommends using the low gear to start and I can confirm that. There is a little bit of getting used to driving and steering it. I do recommend using your drill and the Socket that is purchased separately. Makes it a lot easier. I will be using mine as a permanent trailer jack. I think this will be fine
25
166
Show More Reviews
See what our Experts say about this Trailer Valet Accessories and Parts
- Bolt-On Side-Mount Dual Wheel Trailer Jack Recommendation for Utility TrailerSince you want a side-mount jack that will work on dirt/grass surfaces I suggest a dual-wheel type such as the Fulton # FXPD15L. Dual wheel will spread the weight over a larger area and help the jack function on such softer surfaces. The jack offers bolt-on installation, a hefty 1500-lb tongue weight rating, plunger-pin swivel operation and 12-inches of lift. If the surfaces are very soft or rutted you may instead prefer the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211. This...
view full answer...
- Trailer Dolly Recommendation for Moving Boat Trailer Into Garage with Bevel at the DoorFirst of all, thank you very much for your service, and thank you for providing an entertaining read. Using a tow dolly instead of your current trailer jack will definitely help make moving your loaded boat trailer much easier. We do have options like the Rack'Em # RA20 which is a cost-effective solution but if you are already experiencing some back issues then this isn't a very viable option, plus it only has a weight capacity of 500 lbs. Instead, something like the Trailer Valet 5X...
view full answer...
- Recommended Trailer Dolly with Brakes for Moving 2000 Pound Trailer on InclineWe actually carry several trailer dollies that have an automatic brake. The one most appropriate for your 2000 pound trailer is the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211. The 5X has a 15 inch lift and is rated for 500 pounds. It uses an integrated chain drive system that is powered by a hand crank. Add the drill attachment, # TVDA, to use your cordless drill to power the drive system if you'd like. Take a look at the videos I attached to see the dolly being used.
view full answer... - Trailer Dolly That Will Fit a Tear Trailer With an Off Road Coupler/Non-Ball CouplerYou would have to use a dolly like the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211 that attaches to the frame of the trailer. This is operated by the included hand crank or you can opt for the Drill Attachment # TVDA that will let you use a cordless power drill to move the trailer around. This will fit a trailer frame up to 6" tall and 2-3/4" wide and has 15" of lift in the jack. We currently do not have a manual dolly that will work with the Max Coupler receiver.
view full answer... - Short Trailer Jack with Wheel to Maneuver Lawn Vac with 100 lb Tongue WeightThe only thing we have that sits lower than 10" so you can make your hitch connection is the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211 which sits at 9" when fully retracted. This is a bit overkill for your lawn vac but it does solve the issue of a heavy tongue and you having to manually move the trailer around. If you grab the drill attachment # TVDA as well then you can move the trailer around without any effort at all. If you have a trailer you'd like to be able to use...
view full answer... - Dolly Recommendation for Moving Trailer 70 FefetBest option we have would be a Trailer Valet XL like the part # TVXL25 if you have a 2-5/16 inch hitch ball or part # TVXL2 if you have a 2 inch ball. This is a dolly that attaches to the coupler of your trailer and allows you to easily crank the trailer around by hand. Or you can also get the # TVDA which allows you the ability to use a power drill to crank the dolly making it even easier to move the trailer.
view full answer... - Recommended Trailer Dolly for Maneuvering Trailer in Tight SpacesFor those times when you need to maneuver your trailer into its storage position an option that is better than a caster wheel jack is a trailer dolly. The Trailer Valet 5X # STC-V211 is a bolt-on trailer jack and trailer mover in one that offers 2-speed hand-crank operation that makes positioning your trailer a whole lot easier. Dual posi-traction wheels make for easy transport and the built-in handle allows for easy steering. There is even a power drill adapter # TVDA to allow powered...
view full answer... - Trailer dolly - what specs should I look for?Our most popular trailer dolly is the Trailer Valet 5X # STC-V211. It's capacity is 500 pounds which needs to be more than the tongue weight of your trailer. It has a hand crank that makes it easier to move around. Plus, you can add the optional drill attachment to power the drive with your cordless drill. I've linked videos of the X5 and the drill attachment for you.
view full answer... - Recommended Trailer Jack That Can Be Used To Move a Trailer And Quick Disconnects From Trailer FrameMy recommendation would be to use the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211. This jacks mounting plate can stay on your trailer frame and the jack can be easily removed with its pipe style mount. You will also be able to move the trailer much faster than with the Extreme Off-Road Ratcheting Trailer Jack w/ Wheel # ORJW1SU. The Drill Attachment # TVDA will allow you to use an 18 volt cordless drill to move the trailer rather than using the hand crank.
view full answer... - Recommended Trailer Dolly For A Teardrop Camper With A Max Coupler The only solution we currently offer to manually move your trailer with a Max Coupler would be to use the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211 that you were already looking at. This would clamp to the tongue of the trailer and have a hand crank to push the wheels and move your trailer around with ease. You can also use a drill with part # TVDA to make moving the trailer even easier.
view full answer... - Tow Dolly Needed for a Boat Trailer with a 1,100 lb Alumacraft BoatThe best option that we have is using a Trailer Valet XL. We have part # TVXL2 which comes with a 2" hitch ball or part # TVXL25 which comes with a 2-5/16" hitch ball. These have a manual crank which make moving your trailer by hand much easier. Both options have a 1,000 lb tongue weight rating and come with a drill bit piece so that you can use a powered drill. A step down from that is the Trailer Valet 5X Swivel Jack # STC-V211 which is the same idea except that it mounts directly to...
view full answer... - Trailer Dolly Options for a 4,500 lb Travel TrailerIf you are looking for something that stays permanently attached to the trailer then the only thing we have is the Trailer Valet 5X # STC-V211 because it mounts directly to the frame and has a swivel feature for when you are traveling. You can also use the drill attachment # TVDA to help make moving the trailer easier/quicker. This has an automatic brake as well but the max tongue weight capacity if 500 lbs so if your will exceed that at all then you need to upgrade. Aside from this you'll...
view full answer... - Does The Trailer Valet TVXL2 Come With A Cordless Drill?The Trailer Valet XL # TVXL2 does come with the drill adapter # TVDA. This can be used with virtually any 18 volt cordless drill. We do not carry drills here at etrailer, but you will be able to find a compatible drill pretty much anywhere that sells tools. I have a Black and Decker cordless drill that I got at Lowes which I have used for similar purposes. Something like that would do just fine.
view full answer... - Recommended Best Trailer Tongue Jack for Maneuvering in Tight Areas and on Gravel or Soft TerrainThe best swivel trailer jack for gravel and soft ground is the Trailer Valet # STC-V211. The Trailer Valet jack will have dual rubber wheels unlike the Fulton Jack # FXPD15L, which has plastic wheels, thus giving it better grip and support through the rougher and softer terrain. The # STC-V211 will also allow you to maneuver more precisely than the Fulton jack, because it has an integrated drive function that makes maneuvering effortless in tight spaces. Another really neat feature the...
view full answer... - Best and Easiest to Use Manual Trailer Dolly for a 2000-LB TrailerWe have a great trailer dolly for you. It's the Trailer Valet 5X Swivel Jack and Trailer Mover, part # STC-V211. This dolly can handle trailers with a gross weight of 5000 pounds and tongue weights up to 500 pounds. It works by turning a crank rather than pushing and pulling, greatly reducing the amount of strength needed to maneuver your trailer.. You can even use the Drill Attachment for Trailer Valet XL or V2 Trailer Dolly, part # TVDA, to replace the effort of turning the crank with...
view full answer... - Trailer Jack Needed to Easily Maneuver Boat Trailer in GarageSince you are maneuvering your boat trailer on a smooth garage floor there really isn't any advantage to using a dual wheel jack like the Fulton # FXPD15L over a single wheel jack. The dual wheels basically help to make moving the trailer easier when rough terrain is involved. If you are having difficulties moving your trailer (and it is affecting you physically) then you may opt for a jack that is easier to use. Trailer Valet has a few different options to choose from with the base unit...
view full answer... - Trailer Tongue Jack with Pneumatic Tires for Easier OperationMost A-frame campers like your 2019 Aliner Classic off-road model will have a caster wheel tongue jack that uses a hard plastic wheel. There are no replacement pneumatic tires that will fit in place of that wheel but there is a specialty jack product that does have dual pneumatic tires, the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211. This unique bolt-on jack allows you to easily move and steer your camper thanks to its 2-speed hand crank operation. It even has an automatic...
view full answer... - Can Any Hitch Ball Be Used with Trailer Valet XL Trailer Dolly The 2-5/16 inch hitch ball that is included with the Trailer Valet XL Trailer Dolly # TVXL25 is uniquely threaded to tighten into the base on this jack. Because of this, you likely won't be able to use your own hitch balls. If you also need a 2 inch ball, you can just add the Replacement 2 Inch Hitch Ball # TVHB2. The Drill Bit Attachment # TVDA that is also included does feature an asymmetrical design that makes it unique to this jack as well. If you were to lose the attachment, you...
view full answer... - How to Move Boat From CE Smith Boat Trailer Without Boat RampThe CE Smith Boat Trailer # CE48810 is a great choice to transport your Sun Dolphin Pro and using a trailer dolly will absolutely work for you. You could use the Rack'Em Trailer Dolly # RA20 if you wanted as the tongue weight of your trailer will keep it on the smaller hitch ball of that dolly. However, I do think there is another option that would be better for you. I recommend the Trailer Valet 5X Swivel Jack and Trailer Mover # STC-V211. It will act as a jack so you can unhook your...
view full answer... - Troubleshooting Trailer Valet JXS Trailer Jack No Longer Fully Extending With Cordless Drill AdapterIt sounds like you may need to add some more grease to the Trailer Valet JXS Trailer Jack # TV64FR. With the performance of the jack getting worse the portion of the screw inside the jack is likely drying out making operation with the Drill Attachment # TVDA more difficult on the drill. There is a grease zerk on the back of the jack below the crank handle area.
view full answer... - Drill Attachment to Use with Trailer Valet Trailer Dolly STC-V211The Trailer Valet Trailer Dolly part # STC-V211 does not come with the drill attachment. You'd need to order that separately with the part # TVDA.
view full answer... - Trailer Mover for Use with 16-Foot 3500-lb Airstream Sport Travel TrailerThe trailer mover I suggest for your 3500-lb Airstream Sport travel trailer is the Trailer Valet 5X model # STC-V211. This 2-speed chain-drive trailer mover simply clamps on to either side of your A-frame (no welding and no drilling) and it can handle the loaded trailer tongue weight up to 500-lbs. It features an automatic brake for your safety. You can hand-crank the Valet or use the cordless drill adapter # TVDA to give you a really easy method for maneuvering the trailer into tight...
view full answer... - Marine Side-Wind Swivel Jack to Replace Shelby Jack 5856AI suggest checking out the Fulton Round Snap-Ring Swivel Marine Jack # FTJ120W0301. This jack has a lift capacity of 1,200 pounds, a 10 inch lift and measures 11 inches from mounting bracket to top of jack. The outer tube diameter is 2 inches and the snap ring pilot hole has a diameter of 2.313 inches. The bracket height when retracted is 13 inches and 23 inches when extended. If you prefer a bolt-on installation please refer to the linked page that shows you a range of bolt-on side-wind...
view full answer...
- Recommended Trailer Jack For Moving Trailer Off-RoadWe only have one jack that is designed for what you are describing. It is the Trailer Valet 5X Swivel Jack and Trailer Mover - Topwind - 15" Lift - 5,000 lbs GTW # STC-V211 which has pneumatic tires with little knobs for traction. This has a crank to help you move the trailer but also has the ability to use adapter # TVDA with a power drill to make moving the trailer even easier.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Cole B
Installed by:
Adam E
Installed by:
Matthew B
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Jacob T
Video Edited:
Dustin K
Video by:
Chris R
Video by:
Aidan B
Written by:
Shelly K
Updated by:
Wilson B
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jenny N.
1/17/2023
I am sorry to hear that the Valet is not working for your needs. I see from the notes that Trailer Valet was supposed to reach out to you and I wanted to see if they did.