Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic, Elite, or Liberty Trailer Brake Controllers
(246 reviews)
Price: $23.50
In Stock
Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic, Elite, or Liberty Trailer Brake Controllers
Item # RED49FR
Retail:$35.99
Our Price: $23.50
You Save: 35%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (246)
- Q & A (0)
- Videos (2)
- Photos
Redarc Accessories and Parts - RED49FR
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Redarc
- Vehicle Specific
Install your Redarc Tow-Pro electronic brake controller (sold separately) quickly and easily with this custom wiring adapter. Plug one end of the adapter into your Tow-Pro brake controller and plug the other end in beneath your Toyota Tacoma's dash.
Features:
- Wiring adapter eases installation of your Redarc Tow-Pro Classic, Elite, or Liberty electric brake controller
- Custom connector end plugs into the port beneath your vehicle's dash
- Other end plugs into your Tow-Pro electric brake controller
- Some wire splicing required for Tow-Pro Classic
- Made in the USA
- 2-Year warranty
TPH-021 Redarc Wiring Harness for Tow Pro Electric Brake Controllers - Plug and Play
This Product Fits The Following Vehicles
- 2014 - 2024 Toyota 4Runner with factory Tow Package
- 2008 - 2012 Toyota Land Cruiser with factory Tow Package
- 2014 - 2024 Toyota Sequoia with factory Tow Package
- 2005 - 2015 Toyota Tacoma with factory Tow Package
- 2022 - 2024 Toyota Tundra
- 2003 - 2014 Toyota Tundra with factory 4-Flat
- 2003 - 2014 Toyota Tundra with factory 7-Way
Video of Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic, Elite, or Liberty Trailer Brake Controllers
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redarc Tow-Pro Trailer Brake Controller Plug-and-Play Wiring Harness Review
Brad Hello neighbors. It's Brad here at etrailer. And today we're taking a look at the vehicle-specific wiring harness, that will work in conjunction with the Tow-Pro Elite electric trailer brake controller. These harnesses are going to be great to work with your Tow-Pro Elite in a variety of different trucks and SUVs. Now, make sure that you get your vehicle-specific harness. You're going to want to use our fit guide on "etrailer.com", and that's going to make sure that you get the right harness, and that way your install goes nice and easy.
Included in the REDARC kit, you will find this plugin adapter, and this is going to have these spliced ends, and you're gonna have to tie into your brake signal, your brake output, your power output and your ground. Now, if you are pretty handy with electrical, that's awesome. That's great. You can use this. But I'm the kind of person, plug and play in OEM kind of setup or really nice factory one like this.
This is the vehicle-specific harness. So this ties in directly to our factory tow system, and clips right in, it's got this nice braided sheathing on it, to kind of protect the wires, and then it plugs directly into our module here. So, to save yourself a little bit of headache and time, and make the install go that much smoother, and not have to worry about loose connections, I highly recommend getting the vehicle-specific harness. So this end of the plug is specific to your vehicle. As you can tell, it looks like the factory plug, it fits in perfect, has the locking mechanism, so you aren't gonna have to worry about loose connections happening with your plug, and it's going to make install a lot easier.
And that was a look at the vehicle-specific harness for the Tow-Pro Elite electric trailer brake controller..
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic, Elite, or Liberty Trailer Brake Controllers - RED49FR
Average Customer Rating: 4.8 out of 5 stars (246 Customer Reviews)
Install your Redarc Tow-Pro electronic brake controller (sold separately) quickly and easily with this custom wiring adapter. Plug one end of the adapter into your Tow-Pro brake controller and plug the other end in beneath your vehicle's dash.by: Danny12/19/2023
Toyota 4Runner
Love that it is mostly plug and play. 4Runner is already wired for a brake controller and the cable I ordered made it simple to just plug it in. I didn’t get the custom switch blank for the 4 runner so I had to modify the existing one and that was a lot of work. Would order blank if doing again. Install was pretty easy. Haven’t towed a trailer yet so not sure how well it works. Looks like factory item after installed.
by: Bryan11/27/2023
2022 Toyota 4Runner
Watched the video that demonstrated how to install the Redarc brake controller in my 4Runner. SIMPLE with the plug and play harness I ordered through you folks. In spite of it being shipped from the states to Canada, it got here in a very acceptable time frame. I believe I'll do the install tomorrow. Thanks ... BRW
by: John03/27/2023
What can you say, "Plug-and-play" worked as it should.
by: Jarrod02/03/2024
Trailer brake easy to install....works great and accessory switch fits perfect...
by: Al G.06/10/2021
2019 Toyota 4Runner
Made the brake control install very sim ple.
Albert G.
6/11/2022
Still working like a factory option. Highly recommend for an easy brake controller installation,
by: T03/22/2024
This part fits my 2018 Lexus GX460. Install was simple.
by: MaineMan207/27/2023
Toyota apparently thinks if you really want a brake controller in a 4Runner, you are going to have to work for it. The wiring harness was perfect once I found the Toyota connector plug.
by: Brad 02/25/2024
made install fast and easy hence the Plug and Play
by: Jeff 08/26/2023
Worked flawlessly. Everything was plug and play, had the kit installed in less than an hour. I would highly recommend etrailer to those looking for towing/trailer accessories.
by: Ronald 12/10/2023
This thing works so good. I actually went and bought a second one for the motorhome and replaced. It was one of these. This is the only one I’m buying from now on.
by: Keith 10/09/2023
2023 Toyota 4Runner
Nice to see companies that think of the customer, keep it simple, do the wire harness and it installs so quick and easy!
by: Jose03/26/2024
Stay away from this company. Get what you need from another company. They won’t do anything to help you.
by: Ken07/30/2023
Toyota 4Runner
The trailer brake controller works well and integrates well into our 4Runner.
by: Duane 04/23/2024
It's always great doing business with you! Thanks!
by: Paul05/28/2023
After 9 camping trips with my trailer, the brake system is working well.
The installation is super simple with its multi-directional mounting system. Great!
by: C White05/02/2023
This wire connecter fit perfectly and made it so there are no splices in my brake controller installation. The connector on my wire harness was tough to get to because it was pretty high up in the dashboard, but otherwise, installation was a snap... and a snap.
by: Kevin 04/15/2024
Perfect fit for my vehicle, easy to ins tall.
by: Nik 10/10/2023
Made the trailer brake install super ea sy!
by: JZ03/11/2024
Have to have this, makes install super fast and easy.
by: Rocky02/07/2024
Simple plug and play.
by: Scott 02/11/2024
the part fit as it should the lookup was correct for my truck the first time .
by: Jose 12/18/2023
2019 Toyota 4Runner
Works great. Easy to install. Would recommend. 2019 4Runner.
by: Dave 07/18/2023
Using the harness made hooking to the controller a “plug and play” operation. Great product.
by: Todd 03/09/2024
Perfect match for the vehicle
by: Harley 02/16/2024
Toyota 4Runner
Fits 2020 4Runner perfectly.
25
246
Show More Reviews
See what our Experts say about this Redarc Accessories and Parts
- Brake Controller Port For Redarc Harness on 2014 Toyota TundraHi Mark; appreciate the purchase and there is but I can also go ahead and show you where the brake controller port is on your 2014 Toyota Tundra to connect the Redarc Plug-and-Play Wiring Harness # RED49FR. Hopefully showing this photo will be easier and if you take a look you can see the white connector for the plug. It's exactly where you mentioned - behind the kick panel on the driver's side - so I'm confident you have found it based on what you described.
view full answer... - Parts Needed to Install Redarc Tow Pro Liberty in 2019 Toyota 4Runner with Tow PackageYes, since your 2019 Toyota 4Runner has the factory tow package all you need to install the Redarc Tow Pro Liberty part # RED24FR is the custom fit harness for your vehicle part # RED49FR and you'd be set.
view full answer... - Wiring Harness For Redarc Tow-Pro Liberty Brake Controller In 2018 Toyota Sequoia w/ Tow PackageFor your your 2018 Toyota Sequoia with the factory tow package you will need the Wiring Adapter # RED49FR to install the Tow-Pro Liberty Brake Controller # RED24FR.
view full answer... - What Plug-and-Play Harness Fits with the # RED44FR on My 2022 Toyota 4Runner? With a factory tow package on your 2022 Toyota 4Runner with the Redarc Tow-Pro Elite # RED44FR, the correct plug-and-play harness you need is the # RED49FR. This harness simply plugs into the connector in your 4Runner's dash.
view full answer... - Troubleshooting Tow-Pro Liberty Recalibrating After Trailer DisconnectI reached out to Redarc and it sounds like you need an extra ground wire for your Redarc Tow-Pro Liberty Brake Controller # RED24FR. There is no Redarc wiring harness available for your vehicle, but if you look at one like the # RED49FR it has an additional ground wire. This is what allows the controller to retain power when the trailer is disconnected. If you hard wired your brake controller using the Toyota provided pigtail you will need to splice an extra ground wire in with the Toyota...
view full answer...
- Wiring Harness for Redarc Tow-Pro Elite on a 2022 Toyota 4Runner with Tow PackageYes, there is an adapter wiring harness avaiable for your 2022 Toyota 4Runner with tow package. If you get the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR then you will just need to also get the Plug-and-Play Wiring Harness # RED49FR. The # RED49FR will plug into the # RED44FR and then plug into the plug under your dash.
view full answer... - Brake Controller Wiring Adapter for 2020 Toyota 4Runner and Redarc Tow Pro EliteIn addition to the # RED44FR Redarc Tow Pro Elite, you'll also need the # RED49FR vehicle specific wiring adapter. The factory connector is located above and to the left of the emergency brake pedal as shown in the provided photo. I've linked to a product installation video that you might find helpful.
view full answer...
- Troubleshooting Fault Codes in a Redarc Tow Pro Liberty Installed in a 2022 Toyota 4RunnerThe easiest way to determine what could be causing the issue with your Redarc Tow-Pro Liberty Brake Controller # RED24FR, installed in your 2022 Toyota 4Runner using the Plug-and-Play Wiring Harness # RED49FR is to check the fault code chart in the installation instructions. There are a number of different fault codes that indicate the problem and solution. I have included pictures of the fault code chart here for quick reference. If you you need further help with this, please let me know...
view full answer...
- Recommended Brake Controller for 2016 Toyota 4RunnerThe Redarc Tow Pro Elite # RED44FR provides responsive and customizable proportional braking for your trailer and is one of our most popular and well reviewed brake controllers. I really like that it mounts out of the way and the only visible part is the control knob, which allows you to adjust braking on the fly as needed. You can use the # RED49FR adapter in your 2016 Toyota 4Runner to make the installation much easier. I've linked a review and installation video of this controller...
view full answer... - Is Redarc Tow-Pro Elite Trailer Brake Controller Good Brake Controller for 2020 Toyota 4RunnerYes, the Redarc Tow-Pro Elite part # RED44FR that you referenced will work great in your 2020 Toyota 4Runner TRD. You'd just need the install harness # RED49FR and you'd be set. You'd end up cutting off the black connector and wiring the harness by color to the Tow Pro and you'd be set. The Tow Pro Elite is a really great brake controller solution overall as well. It installs mostly out of plainsight with a small knob you'd mount near the dash and is proportional as well which means it...
view full answer... - Troubleshooting Redarc Tow-Pro Elite Brake Controller Not Recognizing Trailer On 2019 Toyota 4RunnerThis is a common problem that I have seen when using the factory connector on your 2019 Toyota 4Runner. The ground wire for the brake controller is not capable of supporting the negative power from the Redarc Tow-Pro Elite # RED44FR. Redarc has their Plug-and-Play Wiring Harness # RED49FR that includes an additional ground wire that needs to be connected to a good ground source on your 4Runner. You can try splicing in an additional ground wire on your current universal harness to get...
view full answer... - Does The Redarc Tow-Pro Elite Work With Collision Avoidance Systems?Yes, the Redarc Tow-Pro Elite # RED44FR with the plug-in vehicle specific adapter # RED49FR will work fine with Toyota's Safety Sense collision assist system. Since your vehicle has the factory tow package, installation is very simple by use of the plug-and-play harness # RED49FR. I have also included a video of # RED44FR being installed on a 2018 Toyota 4Runner for you to check out as well.
view full answer... - What Wiring Adaptor Do I Need to Use the Tow Pro Elite on My 2021 Toyota 4Runner?The harness you need in order to use the Redarc Tow Pro Elite # RED44FR with your 2021 Toyota 4Runner with a factory tow package, you need the Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic or Elite Trailer Brake Controllers # RED49FR. The connector on the wiring harness is customized to fit your port under the dash of your vehicle.
view full answer... - Parts Needed To Install Redarc Tow-Pro Liberty Brake Controller # RED24FR on a 2024 Toyota TundraTo install the Redarc Tow-Pro Liberty Brake Controller # RED24FR on your 2024 Toyota Tundra you only need the Plug-and-Play Wiring Harness # RED49FR. This will connect to your factory wiring so there is no need to cut any wiring or run new wiring to the 7-way on your Tundra.
view full answer... - Brake Controller Recommendation for 2005 Toyota Tundra SR5Hey Deanna, the brake controller I recommend for your 2005 Toyota Tundra is the Redarc Tow Pro Liberty part # RED24FR as it only puts a small knob on the dash of your truck and uses an inertia sensor to determine how hard you are hitting the brakes for applying the trailer brakes. To wire it to your truck all you need is the correct install harness which is part # RED49FR.
view full answer... - Which Plug and Play Brake Controller Adapter to Install Redarc Tow Pro in 2020 Toyota 4RunnerThe Redarc Tow-Pro Elite # RED44FR can be installed on your 2020 Toyota 4Runner using the plug and play adapter # RED49FR, which is designed for your 2020 4Runner. I've also included an installation video of this for you to check out.
view full answer... - Parts Needed to Install Redarc Tow Pro Elite in 2014 Toyota 4RunnerAll you need to install the Redarc Tow Pro Elite part # RED44FR in your 2014 Toyota 4Runner is the correct install harness which is the part # RED49FR that you mentioned as well. No other components are needed.
view full answer... - Recommended Plug And Play Harness For A Redarc Tow Pro Elite Controller On A 2022 Toyota 4RunnerWhen it comes to installing The Redarc Tow-Pro Elite Trailer Brake Controller - 2 Braking Modes - 1 to 3 Axles - Proportional # RED44FR on your 2022 Toyota 4Runner The Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic or Elite Trailer Brake Controllers # RED49FR is the correct plug and play harness needed to run the controller. You plug one end of the the harness into the Redarc Tow-Pro Controller and the custom connector end plugs into the port beneath your vehicle's dash. I attached...
view full answer... - Brake Controller Wiring Adapter for a 2022 Toyota 4Runner and Redarc Tow Pro EliteYes, there is an adapter for you. The Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic or Elite Trailer Brake Controllers # RED49FR is what you are looking for. Plug one end of the adapter into your Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR and plug the other end in beneath your Toyota 4Runner's dash.
view full answer... - Plug-In Wiring Adapter For Redarc Liberty Brake Controller For 2016 Toyota 4Runner w/ Tow PackageBy "currently wired" I do assume that means your 2016 Toyota 4Runner has the factory tow package, and the plug-in adapter is all that you will need to install the Liberty brake controller; the correct part numbers for the controller and adapter for your 4Runner are the following: - Redarc Tow-Pro Liberty Brake Controller # RED24FR - Plug-and-Play Wiring Harness # RED49FR
view full answer... - Comparing Curt Assure and Redarc Tow Pro Elite for 2020 Toyota 4RunnerThe Curt Assure part # C49UR and the Redarc Tow Pro Elite part # RED44FR are pretty different in a lot of ways but they are similar in that they are both proportional which means they sense how hard you apply the vehicle brakes and apply a similar amount of trailer braking. Where the Redarc wins is that it installs in a more convenient and out-of-sight location since only a knob installs on the vehicle dash. The Curt is a more traditional brake controller that mounts a "box" on the dash....
view full answer... - What Is Green Wire for on Factory Brake Controller Harness for 2019 Toyota 4RunnerIn regards to the green wire on the factory harness, this won't be used. It's for an illumination circuit that is not used on most newer brake controllers. The correct harness you need to install the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR on a 2019 Toyota 4Runner is the Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic or Elite Trailer Brake Controllers part # RED49FR . If you want to use the provided factory harness you can instead use the Universal Wiring...
view full answer... - Correct Harness for Redarc Tow-Pro Elite Trailer Brake Controller On 2019 Toyota 4RunnerIn order to install the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR on a 2019 Toyota 4Runner you'll need the Plug-and-Play Wiring Harness for Redarc Tow-Pro Classic or Elite Trailer Brake Controllers part # RED49FR. It comes with a universal panel but the one you need for a 19 4Runner is the Mounting Panel for Redarc Tow-Pro Elite Trailer Brake Controller Control Knob part # RED48FR.
view full answer... - Recommended Trailer Brake Controller For a 2024 Toyota TundraI recommend the Redarc Tow-Pro Liberty Brake Controller # RED24FR for your 2024 Toyota Tundra. This will easily connect to your factory wiring with the Plug N Play Wiring # RED49FR making for a simple installation. You can also use the Mounting Panel # RED48FR to install the control knob to your dash.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Dustin K
Updated by:
Wilson B
Video by:
Jonathan Y
Video by:
Thomas T
Test Fit:
Conner L
Written by:
Kristina F
Installed by:
Michael B
Installed by:
Bradley B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
John
3/27/2024
Still love it.