Trailer Valet Combo Ball Tower Mount for RVR Trailer Dolly - 2-5/16" Hitch Ball

Video Transcript for Review of Trailer Valet Trailer Dolly - Combo Ball Tower Mount - RVRBB225

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this Trailer Valet Combo Ball Tower Mount for your RVR Trailer Dolly. This one has the two and 5/16ths diameter hitch ball. Now this combo ball tower mount is what'll let you connect your trailer's coupler to your trailer valet RVR three, trailer valet RVR five or the RVR nine models. Those three models we do sell separate on our website. And basically this mount here includes the two and 5/16ths diameter hitch ball so that it'll fit trailers that have a two and 5/16th size coupler.

Now if you're not familiar with the trailer valet, what that is, it's a remote controlled, self-motorized trailer dolly that'll let you effortlessly move your trailer into the garage or other tight spaces. Just to show what we're talking about, I'm gonna pop up an insert and there you can see a picture of that trailer dolly with this ball mount installed. The ball tower mount gives you the option of connecting the trailer valet to your trailer coupler, using the hitch ball and the coupler. Now this part here will include all the following that I got laid out here on the table. We'll start right here with the two and 5/16ths diameter custom hitch ball with the washer, the coupling plate, right here in the middle is the custom ball base that the hitch ball will attach to, comes with a spanner wrench for tightening the ball base and then over here is the base tower, comes with the security pin and this base tower will connect to the trailer valet.

So this all goes together. So what you want to do is take your ball base, put your coupler plate right on top of there and then go ahead and start threading your ball into the threads into the ball base. And once you get the thread that's starting, just go ahead and twist it and then you'll just go ahead and tighten that so it goes all the way down there and then you'll snug it up, torque it down. And again this will come with a set of instructions that'll describe everything. So we get your ball tightened down just like that.

And then what you'll end up doing is then this whole combination will fit into this base tower that the base tower, as we mentioned, is what connects to the trailer valet. So right down here you'll see this hole that goes all the way through and then there's pinholes right there. So what you'll do is drop this in, until those pin holes line up, take our security pin, once you get the hole lined up, slide it all the way through, go ahead and clip that. So now this is all connected and again, this will drop into your trailer valet. Now the spanner wrench is used for up here.

So you just have these holes you'll see on the side here, you'll put your spanner wrench right into those holes like that and that's what'll tighten that down. So that's what you use that for. And then once you have this all together like this, it'll install into your trailer valet and allow you to connect to a two and 5/16ths size coupler. But that should do it for the review on the Trailer Valet Combo Ball Tower Mount for the RVR Trailer Dolly.