LED Combination Trailer Tail Lights - Submersible - Driver and Passenger Side - 25' Wire Harness
(215 reviews)
Price: $56.52
In Stock
LED Combination Trailer Tail Lights - Submersible - Driver and Passenger Side - 25' Wire Harness
Item # TLL16RK
Retail:$104.84
Our Price: $56.52
You Save: 46%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (215)
- Q & A (0)
- Photos
Optronics Trailer Lights - TLL16RK
- Tail Lights
- Rectangle
- Kit
- LED Light
- Red
- 8L x 3W Inch
- Surface Mount
- License Plate
- Rear Clearance
- Rear Reflector
- Side Reflector
- Stop/Turn/Tail
- Submersible Lights
- Optronics
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.
Features:
- Rectangular combination tail lights are designed to serve 7 functions on trailers over 80" wide when properly mounted
- Stop, tail, turn, side marker, side reflex, rear clearance, and rear reflex
- Built-in license plate light on driver's-side light illuminates license plate
- Sealed, waterproof construction is submersible
- Designed for marine trailer applications
- Durable surface-mount technology (SMT) construction of LED circuit board
- Better withstands shock and vibration
- Allows for improved heat distribution
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Red acrylic lens screws on and can be easily replaced
- Molded plastic housing
- Mounts on surface of trailer - stainless steel hardware included
- Includes license plate bracket for mounting driver's side light
- 3-Wire pigtail
- 25-Ft Wiring harness for making connections
- DOT compliant
- Meets FMVSS 108 and CMVSS 108 requirements for automotive lighting
- P2PC rated
Specs:
- Configuration: driver side (STL17RB)
- Passenger side (STL16RB)
- Dimensions: 8-1/16" long x 2-7/8" tall x 2-13/16" deep
- Diodes: 40
- Driver's-side light: 22 diodes
- Passenger's-side light: 18 diodes
- Power draw at 12.8 volts:
- Stop/turn signal light: 0.259 amps
- Tail light: 0.062 amps
- Lifetime warranty on LEDs
Sealed, Waterproof Trailer Light
The waterproof construction of these lights make them ideal for use on trailers that may be submerged, like a boat trailer. Each circuit board is sealed, which means that water will not damage the diodes or circuit board.
Combination Lights for Trailers Over 80" Wide
If a trailer is 80" or wider at its widest point, then it requires rear clearance lights in addition to basic trailer lights. These clearance lights indicate the width of the trailer when it is viewed from the back.
To meet these requirements on a flatbed utility trailer where the bed extends past the wheels, you can install combination trailer lights that include the rear clearance function. For proper mounting, the lights must be installed at the widest points on the rear of the trailer - one on each corner.
PC-Rated Lights
A PC-rated light produces a 90-degree angle of light to either side of its centerline for a total of 180 degrees of coverage. This beam pattern can be clearly seen when you are standing directly in front of the light, as well as when you are standing on either side of the light. When properly installed, this type of light can function as both a front clearance light and a side marker light or as a rear clearance light and side marker light.
TLL16RK Optronics LED Combination Tail Lights for Marine and Boat Trailers over 80" Wide - Submersible - Driver and Passenger Side - 25' Wire Harness
Alternate part number: TLL-16RK
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
LED Combination Trailer Tail Lights - Submersible - Driver and Passenger Side - 25' Wire Harness - TLL16RK
Average Customer Rating: 4.8 out of 5 stars (215 Customer Reviews)
8-1/16" x 2-7/8" Rectangle. Waterproof lights act as brake, tail, turn, side marker, side reflex, rear clearance, rear reflex, and license plate light for trailers. Surface mount - hardware included. 3-Wire pigtail. 25' Wiring harness.by: Shawn 05/08/2024
Great quality. Super simple to install. It is all in one and the wiring harness is one piece. Makes the job simple. Lights are bright. I added side marker lights.
by: Jonathan03/24/2024
So far, so good. I used this kit on my boat trailer. So far it seems to be holding up, although I unplug it for launching the boat just in case. I certainly wouldn't recommend using the splices that come with this kit seeing as they are anything but waterproof.
by: Jimmy 11/08/2023
I am happy with how fast it was delivered. But the packing worried me. The small plastic lights were just tossed into the box along with the very heavy trailer hitch. The edge of the box was torn. The heavy metal hitch could have very easily crushed the plastic items. Maybe those could have been placed inside a rolled up paper bag.
But lucking out there was no breakage.
I will review after I install. But I like it. The led light wires are big enough to splice onto other wires.
Consider me happy
by: Michael11/19/2023
The LED trailer lights installed by Trailer Works continue to perform well after over a year of service. No leaks.
by: Donald09/25/2023
Could have bought same quality at Harbor Freught for $[XX] less!! Typical made in China inferior hardware, missing bolts, not enough connectors, etc
by: Terry P05/22/2014
The LEDs arrived very quickly. They were a perfect fit for the old incandescents they replaced making the installation quick and easy. Thank you!
Terry P.
5/22/2015
They are still working perfectly! Great not having to worry about my trailer lights while i tow my boat
by: Ken06/20/2022
I needed an extra set of stop/turn lights for a bike rack. You couldn’t see the existing lights when I put a bike cover on. Problem solved. Very bright. Works and looks as described.
by: Robert 08/08/2023
Worked with Paula S of etrailer.com to select the best product for my needs at the best price. Paula was very helpful. Product was scheduled to be delivered on Tuesday and actually arrived a day early on Monday! Very impressed with this service and would highly recommend checking out etrailer.com for any trailer needs.
by: Robert 02/13/2024
Great product. Best price. Quick shipme nt.
by: Wayne05/02/2020
The trailer lights got delivered this morning and on the waverunner trailer this afternoon. Easy to install and are a lot better than the stock lights I removed to put these on. Thumbs-up to etrailer.
by: LizziFromEquiStillPortableEquineStocks01/11/2024
Love, love, love youy TLL16RK lights!
Used them on the Equi-Still Portable Equine Stocks we just shipped to the USA from NZ!
Thanks!
xx
Lizzi Thompson
by: Alex 08/29/2023
I was impressed by the quality and instructions provided!
by: Ratko10/08/2023
Great product. Easy to install and very happy with it.
by: Alan11/06/2021
I built a small trailer to use at the farm and road capable, i bought all my parts from etrailer including the light kit, works great and have always been pleased with the service provided by etrailer
by: Rod 09/18/2023
The lights fit to opening perfectly
by: Jeff 02/01/2023
Product was everything it was advertised to be. Installed easily and is working great. Lights are bright and work well.
by: Norm C06/08/2017
Bought this kit to replace a failed set of waterproof filament type boat trailer lights. This is my second purchase of LED lights, I love how bright they are. Total cost of this complete LED set was only a few dollars more than the cost of replacing just one failed filament bulb in a sealed pod set. With six trailers at my place, I see many more LED sets in my future! As always, good price and fast shipping from etrailer.com.
Norm C.
6/9/2018
Working fine, nice and bright. etrailer.com is still my go-to source for all things trailer.
by: Joseph A10/21/2023
good quality, nice and bright, easy to install.
by: John G.09/13/2019
Thanks for this 1 year review opportunity. My purchased was changing all my boat trailer lights to LED. They are working excellently with no problems. I think they are better than what I see on newer boat trailers. Thanks for your excellence advice, service and prompt shipping.
John G.
9/14/2020
All LED lights continue to work perfectly. I remain very satisfied about the product and service from etrailer.
by: Jeffrey07/10/2018
I give the product a good rating So far. I'm not finished yet but it's coming along. The negative to me is the instructions. First is the size of printing (small and unreadable) of the combined picture of the trailer and electrical schematic (2" x 1"). It is very hard to follow and understand. Helpful tips would be a good idea. The added rear light bar I ordered needs some attention as to mounting and wiring. I think once I get through with the wiring and assembly I will be happy. All the lights and mounting technique seems well done.
Mike L.
7/11/2018
If you need some assistance with the install, were just a phone call away. If you use the provided link, you can see some trailer wiring diagrams and a help article that will provide more information for you.
Helpful Links
by: David J10/09/2022
Love the product. I was looking on eBay for parts to fit my present lights. This system is much better and more inclusive for parts than anything I found on eBay. I started out thinking I would just replace one taillight (or both) on my aged boat trailer. Replacing the entire system is a far better decision. Vast quality improvement for the same money. But the videos and telephone/email supports for placing orders at etrailer are phenomenal. They have become my "go to" source for my trailer needs. Great products, great prices, great support. Also, I received the lights faster than expected . It is easy to see that they care about their customers and have confidence in their products.
by: Brian 08/09/2023
fast delivery & anything not made in China is an improvement , thank you
by: Dan G.06/09/2016
This kit was fantastic. It was easy to install. I made a few mods, like soldering all the wire connections, then taping them. The lights are so much better than the incandescent ones I had before. Very pleased with this kit and etrailer. Resonable price and fast shipping were the icing on the cake.
Daniel G.
6/9/2017
Its been a year, and I couldnt be happier with these tail lights. I highly recommend them and etrailer. Thanks again.
by: Kelly 09/12/2023
Took me about an hour to install and the new lights look great!
by: Scott R05/17/2017
I have owned these lights for at least a year. Still love them. No problems whatsoever over the last year. etrailer is a great vendor to buy accessories from. Great products and customer service !!!
Scott R.
5/17/2018
No problems with these lights after 2 years. Still working like new. Great lights!!
25
215
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Troubleshooting part # TLL16RK not IlluminatingWe can get you set! To answer your question the wires on the LED Combination Trailer Tail Lights part # TLL16RK are going to be Brown= tailight Green= turn and brake White= ground The white wire is where I believe the problem lies. Since the entire housing is not lighting it is the likely the ground wire is not getting a good connection to the frame of the trailer. It could have been incorrectly wired but after confirming that is correct the ground would be my next stop. You want...
view full answer... - What Gauge and Composition Are the Wires on the LED Combination Trailer Tail Lights by OptronicsI reached out to my contact at Optronics and they were able to give me some additional information on this light set. The LED Combination Trailer Tail Lights # TLL16RK have full copper wires that are 18 gauge wires.
view full answer... - LED Trailer Light Kit for 1995 Four Winns Trailer For a standard RV led trailer taillight kit the part # TLL16RK that you referenced would work great. It comes with new wiring, connectors, a license plate bracket as well as two waterproof and very visible LED trailer taillights.
view full answer... - Where Does the White Wire Go on Over 80 Inch LED Trailer Tail Light Kit # TLL16RKOn a trailer, the white wire will need to be attached to a clean and corrosion free bare metal surface on the trailer frame near the coupler. One tip I can add with light kit # TLL16RK is to run jumper grounds from the light to the trailer frame on the side with the license plate holder because the holder can interfere with a good ground connection. I have incldued a link to a video showing a typical installation.
view full answer... - Replacement Options For LED Trailer Lights On A 2000 Nitro Bass Boat TrailerThe part number you gave me just comes back to the lens of the light, which is used on multiple models, like the # 403026 so I don't know the exact light bulbs used in your trailer lights. That being said you could pull the bulbs to see what they are and just replacement them with compatible LED versions. For example, both the # 403026 and # 403076 use 1157 and 193 bulbs. You can replace the 1157 bulbs with # ARC93FR and you could most likely find an LED 193 bulb at your local lighting,...
view full answer... - Availability of Trailer Light Kit for 40' Boat TrailerAll of our light kits like the Optronics # TLL16RK come with a 25' wiring harness. However, it is possible to put one together. You will need the following: -Optronics LED Combination Trailer Tail Lights # TLL160RK -4-Way Wishbone Trailer Wiring Harness with 42" Ground Wire - 40' Long # A40W42B -Trailer License Plate Mount Bracket # LP10SB -Quick Splices # SWC502905-1 -CE Smith Trailer Wiring Clips # CE16867A Piecing it together isn't as cost effective but this will give you everything...
view full answer... - Replacement LED Taillight Recommendation for 2002 Shoreland'r Profile 2000 Boat TrailerWe do indeed have some LED taillights that'd work great on your boat trailer. I'd recommend # STL57RB for the driver side and # STL56RB for the passenger side. These lamps measure 6-1/16 x 2-5/8 inches, and would work well on your trailer. As you can see in the photo provided by one of our customers, the taillight works well on a Shoreland'r trailer. As long as they're still working okay, you certainly may leave the existing fender running lights in place. If you decide you want to replace...
view full answer...
- What Are Dimensions of Optronics LED Light Kit # TLL16RKI pulled the Optronics LED Trailer Light Kit, part # TLL16RK, from our warehouse and measured the outside dimension. I shot a little video as I measured the lights for you to check out. The outside dimensions of the lights measure approximately 8 inches by 2-3/4 inches. There are not any amber reflectors on this light kit, perhaps you are referring to another kit. Part # TLL16RK has red reflectors on the side.
view full answer... - Recommendation For Replacement Lens on Optronics Trailer Light Kit #TLL16RKOn the Optronics Trailer Light Kit, part #TLL16RK, you have referenced, the replacement lens for the side marker lens on the side of the light is Optronics Replacement Side Marker Lens, part # A17RB. The replacement lens for the larger front lens is Optronics Replacement Tail Light Lens, part # AL16RB. If you are referring to a different light then the lights in the # TLL16RK kit I would need to know the lights you have and the size of the lens you are looking for.
view full answer... - Do The LED Trailer Lights Have A Top And BottomYes there is a top and bottom side of the LED trailer lights # TLL16RK. The driver side light has a license plate light which needs to be facing the ground. That is the easiest way to tell if they are oriented correctly.
view full answer... - 6x4 Inch LED Trailer Tail Lights that Mount on Studs on 2 Inch Centers for Shorelander Boat TrailerWe have Wesbar lights # 271585 for the left and # 271584 for the right. They are 6 by 4 inches, LED, waterproof, mount on studs on 2 inch centers, and you would need pigtail # 40-00-003 (one for each light). LED tail light # STL56RB for the right hand side and # STL57RB for the left are a close match. They are 6-1/16 inches across and 3-5/8 inches tall. They mount on studs on 2 inch centers. The lights are submersible and the LED board sealed to keep out water.
view full answer... - Trailer Light Kit Recommendation for a Pace Enclosed TrailerFor an LED trailer wiring kit that would work well on your Pace trailer I would recommend the part # TLL16RK. This part number comes with everything. The lights are rectangular though. To use the part # ST70RB you would need the grommets part # a70gb, the pigtail part # A45PB, brackets part # BK70BB, and # A35W42B.
view full answer... - Replacement Lens for the Lights in Trailer Light Kit # TLL16RKYes, for the lights used in trailer light kit # TLL16RK, the correct replacement lens is # A16RB. Regarding blowing a tire, always make sure that your trailer tires are inflated to the maximum psi as indicated on the tire. Trailer tires (designated with ST in front of the size) are built with a thicker sidewall to handle more vertical load. If not fully inflated, the thicker sidewall leads to excessive heat build up and can cause the tire to fail. I have included a link to our tire...
view full answer... - Replacement Lens for Optronics Waterproof LED Trailer Light Kit # TLL16RKYes, the Replacement Tail Light Lenses # A16RB referenced in your question is the exact replacement lens for your Optronics # TLL16RK Trailer Lights. This is a direct replacement part and will fit your existing assembly perfectly. The lens itself measures 8-1/16 inches long and 2-7/8 inches in height. It is designed for the LED bulbs that you mentioned.
view full answer... - Converting Karavan Trailer Incandescent Taillights to LEDsOne way to add LED lighting to your Karavan trailer is to replace the entire light assembly, and we do carry replacement LED-type lights for many applications. The linked page displays all of our complete rectangular light units with LED operation. Another way to go is to check whether there is an LED replacement for the incandescent bulbs in your existing lights. We have LED replacements for many popular bulb types. The other linked page will allow you to click on your existing bulb...
view full answer... - Can I Wire Upgraded Trailer LED Taillights Normally with 4-Pin Harness?Yes. You can definitely hook up your LED tow vehicle's wiring harness with your 4-pin trailer harness that has old school taillights. If you happen to replace your boat's lights with upgraded LEDs like the # TLL16RK, you can wire those into the harness like normal. From your vehicle you inputted into the fit guide, you have a 2013 Lexus ES 350. The perfect 4-way harness you need is the Tekonsha T-One Connector # 118592. This harness comes with a much higher-quality converter box than the...
view full answer... - Recommendation for License Bracket Compatible With Optronics LED Tail and License Light # STL17RBThe license plate bracket you will need for the Optronics Rectangular Submersible LED Trailer Tail and License Light, part # STL17RB, is the Optronics Trailer License Plate Mount Bracket, part # LP5SB. This is the bracket that is used in the Optronics Waterproof, LED Trailer Light Kit with Wiring Harness, part # TLL16RK.
view full answer... - LED Trailer Taillight and Wiring Kit for Military TrailerWe have the Waterproof, Over 80" LED Trailer Light Kit with 25' Wiring Harness # TLL16RK that would basically come with everything you'd need. It comes with two LED trailer taillight assemblies, all new wiring for them and the trailer, and then a 4-way connector for the front of the trailer. I attached an install video for this kit for you to check out as well.
view full answer... - Do You Have License Plate Brackets for TrailersYes, we sell license plate brackets separately. There are several options including some with lighting for the plate. I would recommend the Trailer License Plate Mount Bracket, Heavy Duty Zinc Steel, item # LP15SB, if you just need a mounting bracket and if you need the light for the plate the Heavy-Duty, LED Trailer License-Plate Light w/ Mounting Bracket, item # LPL55CB would be a good choice.
view full answer... - Trailer Taillight Kit for Tracker Boat TrailerI wasn't able to find a decent picture of the boat trailer you have so it's hard to say for certain what would be an exact replacement. We do have kits that work great on boat trailers like yours with the part # TLL16RK which we've installed on similar boat trailers that would be an excellent option. I attached an install video for this kit on a smaller boat trailer for you to check out as well.
view full answer... - Replacement Taillight and Harness for Camper Trailer that was Converted to Ice Fishing ShackThe LED Combination Trailer Tail Lights # TLL16RK would be a really great option that comes with two LED taillight assemblies and 25 feet of wiring harness. You could then run the wiring to the junction box part # 277-000141 which has a 7-way on opposite end like you need.
view full answer... - Replacement Trailer Taillight Assembly Kit for 2017 Karavan TrailerThe taillights you have installed on your trailer are not the standard style that we carry so we aren't able to determine if just the bulbs are replaceable. If you remove the lens you should be able to determine this pretty easily. The # TLL16RK that you referenced would give you all new wiring and light assemblies that have LED bulbs which basically won't ever burn out so this would be a great solution either way. Also it will bolt right up to the mounting bracket holes you have currently. I...
view full answer... - LED Replacement Lights for Peterson M444We do have a couple of really good options for you to replace your Peterson # # PM444L and # PM444, but you do have a keen eye because the Tail Light Kit # TLL16RK will not work with the 2-1/4" spacing you have. One of the lights would interfere because it is too long overall and the back of the light cannot be rotated. Instead, for a couple of similar options that have 2" on center spacing and the needed space for you to mount them I recommend checking out the LED Combination Tail Light...
view full answer... - LED Trailer Light Kit Recommendation for a Pop Up CamperYes, the Waterproof, Over 80" LED Trailer Light Kit # TLL16RK would be a great option for an LED trailer lighting setup for your trailer. The light assemblies of this kit are 8 inches by 3 inches and can be installed on basically any trailer. I attached an install video for you to check out as well.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Sarah H
Video Edited:
Andrew K
Video Edited:
Dustin K
Video Edited:
Chris R
Written by:
Tyler C
Video by:
Joshua S
Video by:
Schuyler H
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Noah M
Installed by:
Cole B
Installed by:
Brent H
Installed by:
David F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
9/26/2023
It sounds like you are missing a lot from what should have come with this part! I will have our customer service team reach out to you about this.