Optronics Fleet LED Trailer Tail Lights w/ Grommets - Stop,Turn,Tail - Submersible - Oval - Qty 2
(299 reviews)
Price: $37.94
In Stock
Optronics Fleet LED Trailer Tail Lights w/ Grommets - Stop,Turn,Tail - Submersible - Oval - Qty 2
Item # TLL12RK
Retail:$64.16
Our Price: $37.94
You Save: 41%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (299)
- Q & A (0)
- Photos
Optronics Trailer Lights - TLL12RK
- Tail Lights
- Oval
- Kit
- LED Light
- Red
- 6-1/2L x 2W Inch
- Recessed Mount
- Stop/Turn/Tail
- Submersible Lights
- Optronics
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. Accepts included standard 3-prong plugs.
Features:
- Oval LED trailer tail lights serves 3 functions when properly mounted
- Brake light
- Tail Light
- Turn Signal
- Sonically sealed, waterproof housing and lens unit is submersible
- Durable surface-mount technology (SMT) construction of LED circuit board
- Better withstands shock and vibration
- Allows for improved heat distribution
- LEDs make great replacements for incandescent lights
- Last 50 times longer
- More efficient - provide brighter light with less power output
- No bulbs to replace - no brittle filaments
- Red lens over white LEDs
- Polycarbonate lens and housing
- Recessed mount with included grommets
- Includes industry-standard 3-prong plugs for connections
Specs:
- Quantity: 2 trailer tail lights
- Overall dimensions: 7-9/16" long x 3-5/16" tall x 1-3/4" thick
- Light face: 6-1/2" long x 2-5/16" tall
- Diodes: 12
- 6 LEDs per light
- Powerdraw at 12.8V:
- Stop/turn: 0.161 amps
- Tail: 0.007 amps
- Lifetime warranty on LEDs
Sonically Sealed, Waterproof Trailer Light
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
Recessed-Mount Light
Recessed-mount trailer lights install underneath a housing or a grommet (A70GB). These lights will extend into the mounting surface and require that a hole be cut into your trailer.
TLL12RK Optronics Fleet Count Combination LED Trailer Tail Light Kit - Waterproof - Oval - Red Lens - Qty 2
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
Optronics Fleet LED Trailer Tail Lights w/ Grommets - Stop,Turn,Tail - Submersible - Oval - Qty 2 - TLL12RK
Average Customer Rating: 4.7 out of 5 stars (299 Customer Reviews)
7-9/16" x 3-5/16" Oval. Waterproof LED trailer tail lights function as stop, turn, and tail signal lights when properly mounted. Durable polycarbonate housing and lens. Reccessed mount with grommet. Accepts included standard 3-prong plugs.by: Joseph 04/13/2024
Received the product very quickly. It was easy to order online. The product
(taillights) fit perfect were the right replacement lights. Any time I need to order other products you carry I will order from you.
by: Robert 04/17/2024
The 6.5 inch led stop, tail, turn signal assemblies were exactly what I ordered and on time.
by: Mike09/14/2023
The shipping from etrailer is super fast. The lights appear to be very good quality. The receptacle on the lights were already lubricanted with dielectric grease.installed the light on a boat trailer. The fit on the rubber grommet is loose compared to the factory light that trailer came with. Hopefully they work out ok. Over all a quality product. Much better that what amozon had to offer.
by: Sandra05/31/2023
The reason I put 1 star was, first the order was doubled. I wanted 2 lights and I received 4. Secondly, the picture only showed the front of the light which looks exactly like the light I needed to replace, but the back was different and will not work on our trailer. Without seeing the back side of the light we can not get the correct light currently making our 6 years old trailer unusable. I now have to return the lights.
by: Aaron Jackson12/07/2018
These LED lights get the job done. They're easy to install, and after a few years of wear and tear out on the road, inexpensive enough to replace. They're bright and let everyone behind you know that you're braking and turning. Can see from long distance away.
by: Marvin 12/09/2022
great quality
by: Doug07/25/2021
Hey not good! The lights are great but the rubber seal is not tight enough. I have lost two lights already backing in the water they pop out of the seal or bounce out going down the road is there a fix because I'm out ro trailer lights? I had to go back to the old ones
Sierra K.
7/30/2021
Thank you for your review. I am not sure what is up with the grommets unless they were stretched out. We do sell replacements:
Helpful Links
by: Mary 02/04/2024
Delivered on time, excellent product, easy to install
by: Scott 02/12/2024
Great product and service
by: Scott D02/06/2024
Great item thank you
by: Pascal N.07/24/2017
I'll give it 5 stars if it wasn't for the long time before shipping...very happy with product, installed four in my horse trailer and make a huge difference. Also installed 6-1/2" Oval LED Trailer Utility Light, Flange Mount, 10 Super Diode - Clear - BUL78CB in back of trailer for safe night horse loading/unloading. see before and after pics
by: Mark12/17/2023
tight joint and works great
by: Richard 11/21/2023
Good enough, working as expected.
by: Joseph 07/24/2022
Easy to install and they work as advertised for a great price
Joseph
7/25/2023
Still working flawlessly! These went on my drift boat trailer which enters the water about 300 times a year with no problems. Excellent price and product
by: Norman03/24/2023
I had lost a trailer light from one of my new trailers. Logged onto etrailer, found these and purchased them. Perfect fit. Thanks etrailer!
by: Cheryl 09/20/2023
Exactly what I was looking for! It was describe perfectly.
by: Gilbert 10/04/2023
good product. easy install. would buy a gain.
by: Michael09/23/2022
The new trailer lights were easy to switch out from the incandescent bulb to a LED light. They are much brighter than the old incandescent bulbs that came original with the trailer. Very pleased with the purchase. These lights were for breaking and turning signals on a 5 x 8 enclosed trailer.
by: Condra,09/15/2023
Great product all around
by: Joseph 08/22/2023
Fit perfectly for replacing old ones
by: Laura S. 06/04/2018
Hi guys,
I'm usually the one answering reviews
These guys are great! My client emailed the link & told me to order these for our horse trailers.
They've held up, to the point, we're not even close to needing to replace them.
We haul quite a bit. These lights have been tried & true, day & night.
When you're hauling a lot of livestock, you want people that have no clue what that entails, to see your lights well before they get near your livestock ; these lights do the job perfect!
We've outfitted 3 separate trailers with this company. We restored wires, lights, & pretty much everything along those lines ;from a 2 horse, to a large stock, & a gooseneck. All the parts come quickly, are all there, & work & fit great. What more can you ask for?!
by: James08/14/2019
The lights installed without any mods. Easy to install no tools needed since I was replacing existing 6inch oval lights with LED.
James
8/15/2020
I am happy with the product. Easy installation.
25
299
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Locating Replacement Brake Lights for 2008 Tracker Tahoe Boat Trailer Trailer manufacturers don't typically keep a good record of the smaller parts they install at the factory like the tail light assemblies. Because of this, your best option is trying to locate a model number somewhere on the assembly itself or simply choosing a replacement with matching dimensions. Looking at pictures of your 2008 Tracker Tahoe Boat Trailer, it appears to be equipped with oval tail lights similar to the Optronics LED Trailer Tail Lights # TLL12RK. These lights measure...
view full answer... - Hole Size Needed to Install LED Trailer Tail Lights w/ Grommet # TLL12RKThe hole needed to install the part # TLL12RK will be 6-3/4 inches long by 2-1/2 inches wide.
view full answer... - How to Determine Correct Replacement Tail Light Lens for TrailerWhile I can help you determine exactly how to figure out what replacement lens you need, trailer manufacturers don't manufacture a list of replacement parts for models of trailers, and SAE actually stands for "Society of Engineers" and isn't a part number for the light, it just means it has passed certain standards. Having said all that, in order to determine the correct replacement lens, a part number (which may be on the light itself) is needed, or you may be able measure to determine...
view full answer... - Troubleshooting Trailer Turn/Stop Circuit that Doesn't WorkMost likely the trailer taillight you are referring to has a weak ground. The brighter illumination of the turn/stop circuit of a light draws more than the running light. So if there's a weak ground it will show up with that circuit. Try improving how the taillight grounds to the trailer. You can even run the ground wire up to the main ground harness and you should see it start to work again. I also attached a help article on trailer lighting for you to check out as well.
view full answer... - Determining Replacement Bearings for a 2008 Wolverine 24TACU TrailerHey Cameron, unfortunately all the information the VIN gives me is the year make and model of your trailer so nothing actually pertaining to bearings. In order to get you the correct replacement bearings, you're going to need to pop your hubs off and remove the existing bearings. From here, there should be a set of numbers stamped to the top of the bearing - this is what I'm going to need. If you can come back with that info handy, I'd be more than happy to help you out.
view full answer... - How to Determine Correct Replacement Tail LightsThanks for that information, and though I was unable to find any reference to a M1235X tail light we assuredly have an option that will work for you. In order to determine this, however, you will simply need to measure your current tail lights and find the one that most closely matches your measurement, and also know if your lights are surface mounted or recessed mounted. For example, the Optronics Fleet LED Trailer Tail Lights # TLL12RK have a light face which is 6-1/2" long x 2-5/16"...
view full answer... - Do the Tail Lights in Trailer Light Kit # TLL12RK have Reflective LensesYes, the trailer tail lights in kit # TLL12RK do have reflectors in the lenses. I have included a link to a video review of this light kit for you to view.
view full answer... - Are All Optronics Lights Covered by Warranty?All Optronics LED lights, such as Tail Lights # TLL12RK are covered by a lifetime warranty. The warranty states that that they will replace the lamp if even a single diode fails. I have added a link to our selection of Optronics LED lights for you to check out as well.
view full answer... - Plate Thickness Compatibility with Recessed Trailer Light GrommetThe Optronics Fleet LED Trailer Tail Lights w/ Grommets # TLL12RK has grommets that are 1-1/8 inches deep. The plate dimension if you want to use the integrated lip on the grommet is 3/16 inch and if not is up to 1/2 inch. I went out to our warehouse to measure this for you.
view full answer...
- Will Optronics Fleet LED Trailer Tail Lights Fit 7" Long x 2-1/2" Tall CutoutThe Optronics Fleet LED Trailer Tail Lights # TLL12RK themselves actually measure 6-1/2" long and 2-5/16" tall. The rubber grommets are what makes the overall dimensions 7-9/16" long x 3-5/16" tall and since those are the outside dimensions and they are rubber you will have no problems with fit.
view full answer...
- Hole Size Dimension for Optronics LED Tail Light with GrommetThe light dimensions of the Optronics LED # TLL12RK are 7-9/16" long x 2-3/4" tall x 3/4" deep and the hole size needed is 6.75" by 2.5 inches. I confirmed this with my contact at the manufacturer and I've attached a template they sent to assist.
view full answer...
- Replacement Trailer Taillight Recommendation for 2000 Featherlite Horse TrailerWe can help with the taillights. I looked up your 2000 Featherlite horse trailer and it uses 6 inch oval trailer taillights like the LED Optronics kit part # TLL12RK which comes with a light for both sides. We do not have window hardware or doors though.
view full answer... - Replacement Taillights for Little Guy 4-Wide Tear TrailerThe numbers you found have to do with the testing that is done for the lights but from what I could find it looks like your Little Guy 4-Wide tear trailer uses oval taillights so something like the 6-1/2" x 2-5/16" Optronics Fleet LED Trailer Tail Lights w/ Grommets # TLL12RK might work for your application, according to what I was seeing. If your taillights have a different design just let me know and I can see if we have a replacement for you.
view full answer... - Correct Trailer Tail Light for 6-7/8" Long Oval CutoutIt seems like you have the standard 6-1/2" long oval trailer tail lights based on the photo and dimensions provided. Therefore I'd recommend upgrading to the Optronics Fleet LED Trailer Tail Lights part # TLL12RK since this would give you a matching set and they are also LEDs so they will be be brighter and last longer than incandescent.
view full answer...
- Replacement LED Trailer Lights for Truck Lite Model 60 TaillightsI looked up your Truck Lite Model 60 and the LED Trailer Tail Lights w/ Grommet and Pigtails # TLL12RK is an LED version of what you already have so it would work and easily replace your current lights.
view full answer... - Can I Reuse my Old Grommet with the Optronics Fleet LED Trailer Tail LightsThe Optronics Fleet LED Trailer Tail Lights part # TLL12RK comes with the grommets you need to install the lights. If you have existing grommets and the old lights are the same size and shape as the new ones then you can reuse these. That said, I don't really recommend this as the grommets are made of rubber and this degrades over time with UV exposure which can lead to a loose fit and possibly the light falling out. It's best to install new grommets when you install new lights.
view full answer... - Will the Optronics Fleet LED Trailer Tail Lights Fit 6-1/2 inch x 2-5/8 Inch Cutout?You won't have any issues. The Optronics Fleet LED Trailer Tail Lights w/ Grommets item # TLL12RK has the exact dimensions you will need. The rubber grommet should have no problem fitting inside your cut out. I have linked a diagram below.
view full answer... - Will Optronics Fleet LED Trailer Tail Lights w/ Grommets Fit a 2-7/16" x 6-11/16" OpeningThe Optronics Fleet LED Trailer Tail Lights w/ Grommets # TLL12RK will fit perfectly in the opening you measured on your trailer. Replacement trailer lights can be confusing at times because each manufacturer uses slightly different dimensions so the question is definitely warranted.
view full answer... - Replacement for J-67 Oval Trailer TaillightsFor an exact replacement you'd want the part # TLL12RK as I looked up the J-67 and that's exactly what these are. Trailer lights are often made by several companies to the same dimensions etc and this is an example of that.
view full answer... - Will Optronics Tail Lights fit 6 x 14 Enclosed Trailer?In order to determine if the LED Trailer Tail Lights # TLL12RK fit your 2004 United trailer, you will need to take some measurements of your current lights. If they are 7-9/16" long x 2-3/4" tall x 3/4" deep, then the # TLL12RK would be a direct replacement.
view full answer... - Replacement Grommet Mount LED Tailights for Nitro Bass Boat TrailerI don't have any available database that would allow me to find what taillights your boat trailer was originally equipped with. Unfortunately, trailer manufacturers don't make that information easy to obtain or disseminate like automotive manufacturers do. However from what I saw online, it looks like your trailer uses standard grommet mounted 6-1/2 x 2 taillights like part # TLL12RK. Quick disconnect pigtails are also included. The lamps will fit in a standard 6-3/4 by 2-1/2 inch rough...
view full answer... - LED Tail Light Replacements for Jayco Eagle Pop-Up CamperWe do carry a large selection of LED tail lights and we will undoubtedly have ones that will work for your 2000 Jayco Eagle M-12 UDK pop-up camper, though we do not have a parts list available for specific trailers. The best way for you to find new LED lights would be to measure your current lights and find a close match. For example, tail lights # TLL12RK are 7-9/16" long x 2-3/4" tall x 3/4" deep and recess mounted, while # TLL9RK are 5-1/16" long x 4-9/16" tall x 2-5/8" deep and surface...
view full answer... - LED Replacement Light for 2001 Ranger Boat TrailerIt is very likely that we have correct LED replacement lights to fit your trailer but I could not confirm your part numbers on the Ranger website or by a web search. Usually this means those are not the light manufacturer's actual part numbers but instead are Ranger's internal reference numbers. This helps steer customers to their dealers for replacement parts. We can help you choose LED lights. Just click on the linked page to see all LED-type trailer lights we offer. Click on the type...
view full answer... - Locating Replacement Tail LIghts for 2001 Featherlite Horse Trailer We do have a large selection of trailer tail lights that may work as replacements for your 2001 Featherlite Horse Trailer. Based on your description and some pictures I found online of this trailer, the Optronics LED Trailer Tail LIghts w/ Grommet # TLL12RK may be a good option. This is a set of 2 oval trailer light lights with red lenses that include black grommets like what you mentioned. They measure 7-9/16 inches long, 2-3/4 inches tall, and 3/4 inches deep. I recommend taking a few...
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Joshua S
Installed by:
Cole B
Installed by:
Brent H
Written by:
Amy B
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Hannah L
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Marvin B.
12/10/2023
product is great so far