Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
2-1/2" x 1-3/16". Waterproof mini trailer light functions as a clearance light or side marker light when properly mounted. Durable polycarbonate lens. Surface mount with self-grounding bracket and hardware. 1-Wire design. P2 rated.
Features:
Specs:
The waterproof construction of this light makes it ideal for use on trailers that may be submerged, like a boat trailer. The housing and lens are sonically sealed together to create a single unit, which means that water will not get into the light and damage the diodes or circuit board.
A P2-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
California residents: click here
Average Customer Rating: 4.8 out of 5 stars (1689 Customer Reviews)
2-1/2" x 1-3/16". Waterproof mini trailer light functions as a clearance light or side marker light when properly mounted. Durable polycarbonate lens. Surface mount with self-grounding bracket and hardware. 1-Wire design. P2 rated.I have an older Shorelander boat trailer and the running lights on the fenders were one missing and one cracked. I ordered these due to having the same dimensions and being LED. Installed them today and all holes lined up perfectly so no drilling needed and lights accepted original single wire plugs. Another successful project completed with parts from etrailer. Thank You etrailer!
Easy to install. Bright LEDs look great on my trailer.
Ordering was easy and package delivered promptly and in nice packaging to prevent damage.
Just what I ordered.
Just what I needed. Exact replacement for what is on my trailer but not ancient and broken:)
Nice lights, but not easy to install...the positive wire breaks off when trying to put the light into the base...I had to solder the wire back on the connector on all four lights..after hours of working on this..success!
The product performed as expected. It was easy to install and worked out of the box.
I was looking for a light that would provide a bright light and not consume a large amount of electrical current. These lights were installed on a boat trailer and I wanted something I did not have to worry about getting submerged when on.
They work great.
The lights work, BUT i had a major issue with the design.
The wire that provides 12V to the light has the potential to ground against the frame and documentation makes no mention of this. i blew every fuse in my truck because of this light direct shorting to frame ground and couldnt figure it out at first. upon taping the connection and replacing fuse it became clear. BE CAREFUL on how you install these connectors! a rather poor design to have so much wire sticking out of the back that can contact trailer frame! (having said that you tape them up right they work just fine.)
Bought a brand new trailer and from the get go some of the regular lights were intermittent. Finally had enough and ordered LED's to replace them all; have not had a single light issue over a year later. All were direct drop in replacements, fit and look great. Thanks etrailer.com!
I love the LED lights!! They give me a brighter lighting around the trailer assisting me in attaching tie downs at night, I can clearly see the corners on my trailer while backing up. They look great and fit nicely on the my trailer.
Extremely pleased with etrailer.com and this product.
Replacing incandescent for LEDs, on my boat trailer. I liked the chrome housing, same as my old ones. Have yet to put them on, will update review after that.
Swisher 1.
4/25/2014
Put them on finally, workslooks better than expected! Lights are soooooo much brighter than the old ones! Fantastic product!
The lights are excellent, a direct replacement. i ordered lights with the chrome frames but not really thinking I would actually use the frames, however trying to get the old lights out required either breaking them or the old plastic frames. Only 4 stars because the new frames require drilling new holes. I went through many websites and even yours I wasn't completely sure I was getting the right lights until they arrived.
The product is exactly what I ordered.
My only question is;
My application is a surface mount? The wiring will need to be external of the bezel. If it were notched to allow this it would complete my application.
Thanks for your interest after the sale.
Ed M.
10/18/2014
The LED Markers are excellent. Bright and low voltage, just what I needed.The center BrakeStop light still is not installed. I live in a retirement community with lots of electronic experience and we cant figure it out. It will bench test but will not work with my golf cart wiring??? We think it is a ground problem that could be resolved with a new harness....but I would have to give up a day of golf ...choices choices choices.Thanks for your continued interest and I promise the next rainy day we will run a new harness.Ed McNamara
Very happy with the lights I purchased. Being LED they are quit a bit brighter then the old ones that came with the trailer. Was very happy with Etrailer in the quality of the product and the quick turn around.
Rick B.
2/5/2018
No problem with the lights. I have been very pleased with the product and company. Would suggest doing business with etrailer.
The LED lights are very good - very bright - but the mounting hardware to fit on a plastic boat fender is far from satisfactory. Two screws came with the lights which just won't work on pre-drilled holes from the previous lights. So a trip to the hardware store was my next step to purchase nuts, bolts and washers.
Nice to have a wide range of marker lights to choose from. Ordered the LED marker along with a new fender. They even upgraded my shipping at no extra cost!
Good quality lights, just be sure to drill the hole for the power wire over size so that the power port on the back of the light doesn't ground out on the trailer frame.
These lights where bought as replacements for the same lights I bought 11 years ago. They go on the running boards of my Ford F250. 3 had gone dim so I replaced all 6 and these where exactly like the originals. Easy install and they are bright. Hope I get 11 more years out of these.
These lights are still working flawlessly after one year of use. etrailer sells great products and their customer service is awesome !!!
Scott R.
5/18/2018
After 2 years these lights are still working without issue. Recommend this products!!
Great product. Had an issue with one of four...contacted etrailer and they supplied a replacement without issue. Can't say enough good things about this company. Thanks!
It works great as all Optronics lights I have purchased.
Great product snapped right into my existing frame. If I were to mount the light the mounting holes are on the small side. My existing holes are 1/4" and these are smaller. Not an issue just need a button head bolt and nut on the back for replacement. Very bright look great.
Easy to install. Its bright, lights up the side of my trailer very well.
Exactly as described always a pleasure working with e trailer I love the photos, descriptions and dimensional details it lets me select the exact right equipment for my job.
Do you have a question about this Trailer Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Barry W.
10/17/2017
Lights are still working great.