Dexter Zinc-Plated Brake Actuator w/ Drop, Electric Lockout - Disc - 2-5/16" Ball
(25 reviews)
Price: $545.92
In Stock
Dexter Zinc-Plated Brake Actuator w/ Drop, Electric Lockout - Disc - 2-5/16" Ball
Item # T4750620
Retail:$764.02
Our Price: $545.92
You Save: $218.10
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (25)
- Q & A (0)
- Photos
Dexter Brake Actuator - T4750620
- Surge Brake Actuator
- Disc Brakes
- 2-5/16 Inch Ball Coupler
- 12500 lbs GTW
- Bolt-On
- Electric Lockout
- Straight Tongue Coupler
- Dexter
Corrosion-resistant, surge-type actuator bolts over 3" wide trailer tongue and includes standard, heavy-duty coupler with 3" drop. Electric reverse lockout lets you back up without activating the trailer brakes.
Features:
- Hydraulic actuator synchronizes trailer brakes with tow-vehicle brakes
- Electric reverse lockout lets you back up without actuating trailer brakes
- Built-in shield protects solenoid valve from the elements
- Unique roller design reduces resistance during telescoping to create straight-line movement
- Sturdy, durable steel construction resists bending in jackknife situations
- Standard, heavy-duty coupler with built-in drop
- Breakaway kit included
- Zinc plating is corrosion resistant
- Bolt-on installation
Specs:
- Application: disc brakes
- Ball size: 2-5/16"
- Drop: 3"
- Mounting: 3" wide channel tongue
- Capacity: 12,500 lbs
- Maximum tongue weight: 1,250 lbs
- 1-Year warranty
When you apply the brakes in your tow vehicle, deceleration occurs and momentum pushes your trailer toward the rear of your vehicle. With surge brake systems, the actuator is triggered as your trailer moves forward while the tow vehicle slows. The actuator telescopes, applying force to its master cylinder, which in turn supplies the necessary hydraulic pressure to engage the trailer's brakes.
Electric reverse lockout with solenoid is automatically activated when the tow vehicle is shifted into reverse. To use this feature, you must have a 5-pole flat, 6-way round or 7-pole wiring harness.
068-506-20 Dexter Axle Model 10 Actuator with 2-5/16" Ball, Drop Coupler - Disc Brakes - Solenoid Lockout and Cover - Zinc
Replaces Titan T4750610 and 4750620
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Arrived Damaged
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Dexter Zinc-Plated Brake Actuator w/ Drop, Electric Lockout - Disc - 2-5/16" Ball - T4750620
Average Customer Rating: 4.2 out of 5 stars (25 Customer Reviews)
Corrosion-resistant, surge-type actuator bolts over 3" wide trailer tongue and includes standard, heavy-duty coupler with 3" drop. Electric reverse lockout lets you back up without activating the trailer brakes.by: Patrick01/24/2024
No grease fittings, the solenoid is not protected from the elements, the zinc plating will surely disintegrate within a year in saltwater.
by: Todd 01/09/2024
Very good quality, and our customer has made no complaints.
by: John08/23/2022
Actually I am a little disappointed. In hindsight I'm not sure I received the hitch I was supposed to get. I spoke with a rep before ordering and discussed the weight of my boat 6500# and I recently noticed that hitch is rated for 6000# lbs. What model was the original order for? Also the clasp on latch is very clunky/stick and covers part of the lock hole. I had to grind it down to get lock to slide through.
by: Darrell O.01/21/2018
I purchased this to because i was replace the drum brakes with disk brakes. It is an excellent actuator (as are the brakes and brake lines). The one issue I have is the thin metal shield for the backup solenoid, it has sharp edges that can cut the insulation of a wire (like the one going to the solenoid) or a child's finger. This design is clearly an afterthought by someone who is incompetent. I bent part of the shield back on itself to minimize the chance of any damage to the wire. This could be easily remedied if the manufacture would add a 1/2" and roll the metal back on itself before bending it. I guess I should be happy that the shield is there at all. I would give it 5/5 if it was not for this stupid afterthought design
by: Donald10/16/2022
Item could be packaged better, it did however arrive a day early. The only reason I did not give a five star review, the guard for the backup solenoid is very thin and was bent to the point of having to be removed to be straightened. I am not sure that it will be strong enough to protect the solenoid and brake line if stepped on.
by: Eric 05/14/2021
After a year of service this thing seems to work pretty good. We had a slightly different style actuator that this unit replaced, I believe the big holes lined up pretty good and the installation was straight forward. We definitely got a big boost in braking power from the other unit that was failing. Unit still looks good after a year of use.
by: Michael11/17/2018
I'm sure the product works fine, but it was too long for my available trailer mounting space. If etrailer would provide measurements along with their product information, it would have saved me the return fees and hassle. Also, packaging is terrible. It was thrown in a box with no packing, and arrived all dented up. Now I have to return it, hopefully without discussion on whose fault that is. Box arrived full of holes, and unit dinged and dented on the corners.
by: Lawrence 04/23/2017
Product was sent very well fast delivery and it was exactly what I wanted
by: Gary 08/07/2022
This is a replacement for the same actuator that was 27 years old. This is a good value.
by: steve08/28/2017
Haven't towed with it yet. Loosely bolted to trailer frame. fit perfect. tin on back around solenoid was bent coming out of package but not huge deal. Won't know more until it gets some road use but so far so good.
by: Patrick01/29/2018
When I got the box,,, it looked like it went around the world a few times. The metal cover around the back up lock out is bent up, but still workable.
Mike L.
1/30/2018
Ill have one of our customer service folks get in touch with you shortly regarding the damage your coupler sustained.
by: K4racer07/21/2017
Thanks for the very quick and personal service. My items arrived very quickly and in good shape. Especially like the photos and summary of what was purchased as part of the confirmation/order.
I definitely recommend etrailer.com
by: Alex05/05/2022
Perfect, just what I needed to replace my worn out old actuator
by: Dale06/14/2019
Great service, Easy to look up parts and the free shipping is awesome although a bit slow
by: Brian08/28/2018
Customer service was great! I received my parts in two days with free shipping.
by: Fred 11/28/2021
Etrailer is the BEST!!!
by: Phil03/22/2021
Bolted right up, works great.
by: Thomas 04/03/2024
by: Matthew 09/01/2023
by: Craig08/11/2023
by: Eric04/21/2023
by: Neil04/05/2023
by: Tony 01/31/2020
Look good for the price thanks
by: Taane07/20/2022
by: Tim 02/03/2022
25
25
See what our Experts say about this Dexter Brake Actuator
- Where Do Reverse Lockout Solenoid Wires On Titan Surge Brake Actuator T4750620 Get Connected?It sure does! The two wires for the reverse lockout solenoid on the Titan Zinc-Plated Brake Actuator w/ Drop, Electric Lockout - Disc - 2-5/16" Ball # T4750620 you were looking at will be wired exactly how you mentioned. One will get grounded to the frame of the trailer, and the other will get connected to your trailer connector and then the reverse lights of your vehicle. It does not matter which wire gets connected to which, just that both do get connected. I included a video of the...
view full answer... - Electric Winch and Surge Actuator Recommendation for Trailer Towing 9,500 lb BoatWhen it comes to choosing a winch for a boat trailer, there are a few general rules we can use. The boat-size-to-winch capacity is generally 2 to 1. With good rollers and short winching distances, the ratio can increase to 3 to 1 and with wooden bunks and long winching distances, you will want to reduce the capacity to 1 to 1. For an electric winch that would work well for you the ComeUp winch part # CU644501 would work well. This has a 4,500 lb capacity and a 50 foot long synthetic rope. For...
view full answer... - Straight Titan Model 10 Actuator for Disc Brakes and Electric LockoutYes, you can use Titan Zinc-Plated Brake Actuator # T4750820 which is straight rather than having a drop coupler. Everything else is the same: fits a 3 inch wide tongue, fits a 2-5/16 inch ball, rated for 12,500 pounds, disc brake applications.
view full answer... - Can You Back Up With Titan Hydraulic Actuator Without Reverse Lockout That's a good question and in order to reverse with the Titan Zinc-Plated Brake Actuator w/ Drop - Disc - 2-5/16" Ball - Bolt On - 12,500 lbs # T4750600 you will need to add a reverse lockout, which is the Solenoid Valve for Titan Brake Actuators # T4748800. The other option is to use the same actuator that does come with an electric lockout, the Titan Zinc-Plated Brake Actuator w/ Drop, Electric Lockout - Disc - 2-5/16" Ball - 12,500 lbs # T4750620. I have added links to video reviews...
view full answer... - Installing and Bleeding New Hydraulic Brakes Lines on Trailer With Titan ActuatorI can help you install new hydraulic brake lines on the trailer. The Titan Zinc-Plated Actuator part # T4750620 is a surge brake actuator so you need hydraulic brake lines. The kit you need depends on how long the trailer is that you are installing the lines in and how many axles the trailer has. The HydraStar Hydraulic Brake Line Kit part # HS496-252 is for a 25 foot tandem axle trailer. To install the lines you want to drill a hole near where the Titan Coupler installs so that you can...
view full answer... - Is the Dexter Zinc-Plated Brake Actuator w/ Drop, Electric Lockout Compatible with Disc BrakesYes, the Dexter Zinc-Plated Brake Actuator w/ Drop, Electric Lockout # T4750620 is compatible with disc brakes.
view full answer... - Replacement Surge Brake Actuator To Replace Tie Down Model 125 12,500LB Drop ActuatorI recommend the Dexter Zinc-Plated Model 10 Brake Actuator w/ Drop to replace your current Tie Down actuator. You will need either the Disc Brake Actuator # T4750620 or Drum Brake Actuator # T2478100. These both have a similar design as your current actuator with a drop coupler attaching to a 2-5/16" hitch ball. The Drum Brake Actuator # T2478100 does not include a Electric Reverse Lockout # T4748800 but you are able to add one if needed.
view full answer... - Converting to Disc Brakes For Trailer With Bearings 14125A & 25580 w/ 8 on 6-1/2 Bolt PatternThanks so much for that info, and the 1.75" measurement you got for the inner bearing means that is a 25580 bearing; along with the outer bearing 14125A and the 8 on 6-1/2" bolt pattern, we can get you the correct disc brake hub and rotor to replace your drum brakes; what you will need is the following: - Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Raw Finish - 7,000 lbs # K2HR712 - Bearing Kit for Trailer Brakes with 13" Hub/Rotor and 1/2" Bolts - 7,000 lbs # DBRKHW7 The #...
view full answer... - How To Remove Master Cylinder Cap On Titan Zinc-Plated Actuator T4750620On your Titan Zinc-Plated Brake Actuator w/ Drop, Electric Lockout - Disc - 2-5/16" Ball # T4750620 you will need to pop out the cylinder cover and then unscrew the cap on the master cylinder. If it is a bit tight you may need to get a pair of pliers down there to give you extra leverage, but be careful to not damage the cap. I included a video of the # T4750620 for you to take a look at.
view full answer... - Repair Kit for Titan Zinc-Plated Disc Brake Actuator for 2-5/16-Inch Balls Model T4750620Yes, the Titan Coupler and Trailer Brake Actuator Repair Kit # T1848700 will fit your 2-5/16-inch actuator model # T4750620 and all other Titan couplers and actuators that specifically fit a 2-5/16-inch hitch ball.
view full answer... - Timbren Axle-Less Suspension System Compatibility with Aluminum I-Beam Trailer FrameThe Timbren Heavy-Duty Axle-Less Trailer Suspension - 4" Lift Spindle - Off-Road Tires - 3,500 lbs # ASR35HDS02 is compatible with I-beam frames and in tandem axle configuration. Due to the Aluminum frame, I recommend putting a thin rubber pad between the steel mount and the aluminum I-beam. The powder coat on the steel should keep the two dissimilar metals from galvanic corrosion, but a thin rubber pad would drastically increase this safety. Zinc plated hardware will work well with...
view full answer...
- Replacement Titan Surge Brake Actuator for Model 10 Part 3241639The replacement Titan actuator for your Model 10 with part number 3241639 is listed on our site as the Titan Zinc-Plated Brake Actuator w/ Drop, Electric Lockout # T4750620. My contact at Titan confirmed this.
view full answer...
- Will Brake Mounting Flanges be Installed on New AxleWhether the axles have the brake mount flanges on them will depend on what you purchased. However, since they're 6,000 pound axles it's fairly likely the flanges will be there. If not, we carry # 4-44-1 for 6,000 pound axles. It will need to be welded to the axle at a trailer shop because it needs to be perfectly square and concentric. As long as your current brake actuator is for disc brakes and functioning properly there's no need to replace it. However, if you previously had drum...
view full answer... - Electric Lockout Solenoid WiringThe two wires coming out of the Titan Zinc-Plated Brake Actuator w/ Drop, Electric Lockout - Disc - 2-5/16" Ball # T4750620 are for the lockout solenoid as you stated. One wire will be used for the power coming from your reverse light signal and the other will ground to your trailer frame. Some of the models now come with a single wire for power on that solenoid and have a set screw underneath to attach your own ground wire to the frame.
view full answer... - Replacement Actuator For Disc Brakes On Triple Axle Boat TrailerThe Titan Replacement Master Cylinder Assembly for Titan Model 10 and Model 20 Brake Actuators - Disc, # T4749501042 will work with disc brakes if you are looking to rebuild your actuating coupler. The Dico Master Cylinder 23744 is only compatible with drum brakes. If you are looking to replace it you will want the Titan Zinc-Plated Brake Actuator w/ Drop, Lockout Shield - Disc - 2-5/16" Ball - 12,500 lbs # T4750620 also made for disc brake application. You do want to ensure you get...
view full answer... - Replacement Orifice Fitting and Cap for a Titan Model 10 ActuatorSounds like you need the orifice fitting gasket part # T0774500 and the replacement cap part # T4830601 for your Titan Model 10 actuator.
view full answer... - Roller Orientation for Reassembly of Titan Model 10Yes there are only two rollers on the damper. The chamfered edge on the # DX46FR should be facing out. The assembly instructions suggest using dummy pins out of 3/4" diameter dowels and state, "Insert one of the wooden dowels into the edge of the top slot of the inner. Then slide the dowel through a rear roller with the chamfered edge out, then through the end of the damper, and finally through another rear roller with the chamfered edge out.
view full answer... - Can Model 10 Actuator Be Used for Drum and Disc BrakesIt depends on what the actuator is rated for. There should be some kind of identifying sticker or maybe it is stamped somewhere on the actuator, like the Dexter # T4750620. If you currently have drum brakes then you definitely need to upgrade your actuator to switch over to disc brakes. Drum brakes don't require as much pressure as disc brakes which is why there is a difference in the actuators that are used. Let me know if you're needing to upgrade your actuator and I can help you choose...
view full answer... - Replacement Master Cylinder Assembly for Titan Actuator Coupler for Disc BrakesThe Titan Actuator you referenced, part # T4750620, is their model 10 actuator which uses replacement master cylinder # T2374600. Their model 60 actuator uses replacement master cylinder assembly # T4820000.
view full answer... - Replacement Disc Surge Brake Actuator for 8,500 lb Boat TrailerSince you are above the 8,000 lb mark for the weight of your boat and trailer you would need go with the next highest capacity which would be the 12,000 lb rating like you mentioned. So for that the Titan part # T4750620 would be an excellent choice. This fits the 2-5/16 inch hitch ball, has the 12k capacity, has an electric lockout, and has a drop built into the coupler portion.
view full answer... - Replacement Disc Brake Actuator for a Road King Boat TrailerI have the exact replacement brake actuator for your Road King boat trailer. For this, you are going to want to use the Titan Zinc-Plated Brake Actuator part # T4750620. This is the same actuator as you have on your trailer now and will allow for a direct bolt-on installation. The actuator has a corrosion resistant zinc plating and comes with the reverse lockout solenoid built into the unit. I have attached a review video of the actuator for you as well.
view full answer...
- Recommended Install Hardware Recommendation for the Titan Actuator part # T4750620Install bolts are not included with the Titan Actuator part # T4750620 that you referenced, you will need to get them from a local hardware store. Titan recommends you use 1/2 inch by 4 inch grade 5 or better bolts, nuts, and lock washers.
view full answer... - Parts Needed for Electric to Disc Brake Conversion on 2019 Grand Design Reflection Travel TrailerWe have disc brake conversion kits for your 2019 Grand Design's 5200-lb axles that are shown on the linked page. A complete hub-and-rotor kit like # K2HR526D completely replaces your existing hubs with new 6-on-5-1/2 hub/rotors and includes the calipers and pads. To select the right kit you'll need to match the wheel bolt pattern, wheel size and the hub bearing set to your existing setup. Disc kits for any given axle weight rating come in various finishes. An all stainless-steel kit will...
view full answer... - Parts to Replace Hydraulic Brake System on a 2004 Magic Tilt TrailerWe can definitely get you started with parts for your Magic Tilt Trailer, but we will need some additional information to complete your parts list. We can start with a coupler. Since your boat trailer will not exceed 10,260 lbs, I recommend looking at a coupler like the Titan Zinc-Plated Brake Actuator for Disc Brakes, # T4750620. This coupler has a 3 inch drop like the coupler you referenced, but it has a 12,500 lb weight capacity which is closer to the weight of your trailer. Using...
view full answer...
Do you have a question about this Brake Actuator?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
David B.
9/16/2022
Sorry about your trouble John, Ill have customer service reach out to you!