Corrosion-resistant, surge-type actuator bolts over 3" wide trailer tongue and includes standard, heavy-duty coupler with 3" drop. Unique roller design helps reduce resistance.
Features:
Specs:
When you apply the brakes in your tow vehicle, deceleration occurs and momentum pushes your trailer toward the rear of your vehicle. With surge brake systems, the actuator is triggered as your trailer moves forward while the tow vehicle slows. The actuator telescopes, applying force to its master cylinder, which in turn supplies the necessary hydraulic pressure to engage the trailer's brakes.
Because this model does not include a reverse lockout, it is recommended that you equip your trailer with free-backing brakes so that you can drive in reverse without triggering your trailer's brakes.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the Titan Zinc Plated Bolt-On Drum Break Actuator with the drop for a 2 and 5/16 hitch ball and has a 20,000 pound weight capacity. Now this hydraulic actuator will synchronize your trailer breaks with your tow vehicle breaks. Basically the unique roller design reduces resistance during the telescoping to create a straight line movement. If you notice the rollers up here and two down here, they do have the grease zerk fittings on them. This will allow you to lubricate the rollers. This is a sturdy, durable, steel construction. It will resist bending in any jack knife situations.
The coupler at the front here is a standard heavy duty coupler. If you notice, has the drop to it. The lock on it is a finger pull lock, so once you put that onto your hitch ball it will lock it into place. The break away kit, which in the chain hooked to this lever here, this is all included. The break away kit would be used, you hook this hook to your tow vehicle, and then if you ever have a situation where your trailer would come detached from your tow vehicle, it'll pull on that chain, moves that level forward, and locks up the breaks on the trailer to keep it from a run away situation. Now this actuator does have a nice zinc plating to it to provide corrosion resistance.
It is a bolt on installation. If you can see right down here, this has the five holes for bolting on to your trailer. A few specs on this: The application is for hydraulic drum breaks, the ball size again that this fits on is a 2 and 5/16 diameter, the amount of drop is 3 inches, it is designed to mount on a 3 inch wide channel tongue, the weight capacity on this is 20,000 pounds, maximum tongue weight is 2,000 pounds. Now one last note I do want to mention is because this actuator does not have the reverse lock out, which is usually a solenoid that's installed on the back of the master cylinder, this one does not have that, so because of that it's recommended that you equip your trailer with free backing breaks, so that you can drive in reverse without the actuator triggering your trailer breaks. That should do it for the review on the Titan Zinc Plated Bolt-On Drum Break Actuator with a drop for a 2 and 5/16 hitch ball with a 20,000 pound weight capacity.
Average Customer Rating: 5.0 out of 5 stars (2 Customer Reviews)
Corrosion-resistant, surge-type actuator bolts over 3" wide trailer tongue and includes standard, heavy-duty coupler with 3" drop. Unique roller design helps reduce resistance.Fast free Shipping...great communication...Thank you!!!
Do you have a question about this Brake Actuator?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.