Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches
(250 reviews)
Price: $36.94
Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches
Item # SR25219
Retail:$39.99
Our Price: $36.94
You Save: 8%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (250)
- Q & A (0)
- Photos
Softride Trailer Hitch Lock - SR25219
- Fits 2 Inch Hitch
- Universal Anti-Rattle Lock
- Keyed Unique
- Softride
- 3-1/2 Inch Span
- Threaded Pin
Silence that obnoxious "clanking" noise that occurs while towing. This locking hitch pin adapts to any 2" ball mount or rack device. An insert fitted with a nut slides inside the ball mount to pull it tightly against the receiver tube.
Features:
- Eliminates the "clanking" noise associated with hitch accessories
- Small, anti-rattle nut insert fits inside the ball mount, bike rack or cargo carrier
- Stainless steel threaded pin pulls the nut securely to the side of the receiver tube, reducing excess space between tube and ball mount
- Protects the vehicle's powertrain by preventing the jerking motion that happens when starting and stopping while towing
- Includes brass lock with rubber dust cover to block out debris
Specs:
- Pin diameter: 5/8"
- Inside width of lock: 3-1/2"
- Compatibility: fits 2" ball mounts, bike racks and cargo carriers with a hollow shank
- Requires 7/8" wrench for installation (not included)
- Number of keys included: 2
- Gross towing capacity: 10,000 pounds
- Limited lifetime warranty
This hitch pin's unique design improves the towing experience by protecting the vehicle's powertrain and safely minimizing that annoying "clanking" sound. Engineered to fit 2" ball mounts, it features an anti-rattle nut enclosure that slides inside the ball mount. A 5/8" stainless steel threaded pin clinches the nut securely to the side of the receiver tube, reducing "wiggle room" between the tube and the ball mount. To prevent theft, the hitch pin includes a brass lock with a rubber dust cover to block out debris.
The insert piece fitted with a nut slides inside the ball mount or any other hitch accessory with a hollow shank. The pin clinches the nut securely to the side of the receiver tube to reduce excess slack between the tube and the ball mount.
25219 Softride Locking, Anti-Rattle Hitch Pin
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Received too many
Customer Reviews
Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches - SR25219
Average Customer Rating: 4.8 out of 5 stars (250 Customer Reviews)
Silence that obnoxious "clanking" noise that occurs while towing. This locking hitch pin adapts to any 2" ball mount or rack device. An insert fitted with a nut slides inside the ball mount to pull it tightly against the receiver tube.by: Brian 01/13/2023
Works exactly as described. Secures my Go Rhino bumper step, and keeps it from rattling. Only problem is I wish the bolt head was 3/4". Most socket sets don't go beyond 3/4", so you'll need a 7/8" box wrench or Cresent wrench to install/remove it.
by: Jon04/28/2024
Great product, NO MORE CLUNKING NOISE!!! Liked it so much I purchased another.
by: Carl 01/25/2023
Works great no rattle or rust. I recommend this item
Carl
1/25/2024
It still works great. After one year I still recommend this product!
by: Rob 05/04/2024
This is my second purchase of this item. The first one worked great for years until I didn't secure the lock properly and it fell off!. No rattles, as secure as possible in today's world.
by: Wayne B.12/23/2014
Arrived quickly. Easy to install with the excellent video and instructions. I installed on my 2012 Forester with the Curt hitch I had previously purchased from etrailer. The locking hitch pin completely stopped my hitch rattle.
by: Jay M.09/12/2011
What I like: Depending on the hitch and receiver you use, the hitch pin may do an excellent job in controlling sway : vertical and horizontal. What I am not entirely happy about: Depending on the hitch and receiver you use, the hitch pin may do an excellent job in controlling sway on the horizontal but not as much on the vertical. Also be careful about over tightening the bold to the anti-rattle assembly. It can twist the rubber stabilizing assembly a little bit. I think that may be the reason for the lack of vertical control. The problem is, my specific pin holes are a bit deep so I can't grab the assembly to line it up correctly. Also the lock sleeve maybe a little big for the pin hole so don't completely tighten the pin so you have a little wiggle room. However it is much better improvement over the standard pin with clip.
by: Daniel09/01/2019
Excellent product. And as always great customer service. I had to customize mine a little bit because of my specific application using an adapter to use 1in 1/4 accessory on a 2-inch hitch. I just had to shave a little plastic off of the nut holder.
by: Brian08/06/2020
Its awesome, works great and no more noise in camper receiver.
Brian H.
8/7/2021
Still love it
by: Jon G.10/20/2011
Great product, fit and finish. There is a trick to getting this little guy installed. Get the bolt near tight, where you still have play in the hitch. You need the play to get the silver shield on the top of the lock to enter the receiver so the lock can lock onto the pin. Once its locked onto the pin, tighten up the bolt and you are done. No wobble, nice and secure.
by: Buhbuh09/28/2013
Just bought a new Tacoma ... wanted one of these for when I have to hitch up a trailer ... haven't towed anything yet, but sure does keep my hitch cover tight! Was very easy to install ...
by: Michael08/19/2023
Works good when installed but it is a bit cumbersome to get the plastic retainer to stay in. The retainer doesn’t grab very well.
by: Lauren02/22/2024
Works well!
by: Marcin06/16/2023
Very well madea and secure locking bolt. It will keep your hitch locked for sure. make sure you have extra room for that lock.
by: Robert 03/31/2024
Looks nice. Haven’t used it yet
by: Captain S12/28/2021
Exactly what I needed. Even though my receiver cargo carrier fits pretty well, there is an slight unavoidable wobble. This pin provides great security and the ability to tighten the tongue to the receiver hitch eliminating ANY wobble. Great device!
Captain S.
12/29/2022
Still love it. It has withstood year round use and works perfectly.
by: Walter01/18/2024
Makes everything nice and rattle free!
by: Tigran07/14/2018
The lock is a great fit for my rack and feels good quality. It was easy to install as well and anti-rattle bolt works great!
by: Juan F.04/29/2015
It fits as advertised, no more rattle when I pull my 22' boat.
Juan F.
5/4/2016
It works so good I even forgot about it. No rattling, no noise, no movement. I love it.
by: Brad 01/16/2023
I know I am a bit OCD but the rattling before installing this hitch pin was really unnerving. The quiet hauling just adds confidence that everything is secure and I can focus on other things.
by: Chuck S08/21/2013
Great product, no rattle. etrailer shipped on time, great company to deal with.
by: Al M05/07/2013
I wanted to wait to review this until I actually installed it in my bike hitch. I tried it on my 2013 Ford Truck and our 2013 Lexis. I was concerned in that the lock actually fit into the hitch hole and wanted to make sure that it did-- and yes, it did on both. Perhaps it is not important but I recommend that you install the lock before you tighten the bolt all the way. The lock has little tolerance for movement so if the bolt is a little off to one side, you might not be able to get the lock on. It’s all good however; you will only make this mistake once. It would be nice if the nut was more secure but I experienced no problem with it which most likely is why they did not do more to secure it. I had an idea that I would just weld a nut to the inside or the hitch and not have to deal with the black plastic holder until it occurred to me that the black device allows this to be self centering. A very good idea. My wife is the one who wanted the bike rack so I let her install it without any advice. She did various things wrong but figured it out. She did not push on the bolt hard enough to get it into the centering of the nut (another good design item) and she tightened the bolt before putting the lock on and it was off center just enough so the lock would not push into the hole. Once she loosened it a bit, it went right in and she retightened just fine. It secures the bike mount to the hitch very well. I would, and most likely will, buy it again. Good value I rate my wife a 5. Nothing else The video is priceless. Play it
Jwdd
3/25/2014
Al, one smart fella there! And good marks for etrailer too.
by: Steven08/07/2020
This lock is a real quality item. I am looking forward to using it to secure my new bike hitch rack! My only complaint is with the shipping company who took my part all over the country before delivering it ten days later. I'm used to much faster service.
Steven O.
8/8/2021
It has been great! I have had no problems with it not opening easily or becoming hard to lock. I would buy it again!
by: Neil08/31/2019
This product keeps the receiver hitch tight and quiet. Easy to install and locks. Get one of these if you want to quiet down the receiver hitch or keep a Hitch-All or bike rack from moving around.
Neil
9/1/2020
The Softride trailer hitchlock is still nice and snug. No issues. I have one for each vehicle.
by: Tom O05/18/2013
This fit my Alpha Tow bar and it tighten up very well. The lock and bolt are well made and the bolt had a lock washer for the bolt end. You could access the lock easily and I found that the lock should be added before doing the final tightening for the bolt.
Tom O.
5/25/2014
Still working fine, I did have to retighten once, but that is all. I will check on occasion to make sure it does not work loose. There is no slack or rattle when tight.
by: Wayne 01/19/2020
This hitch lock was easy to install and works as advertised. No more rattle. It makes it slightly more difficult to connect the trailer chain hook but it's not a problem.
Albert K.
1/20/2021
After a year this hitch lock has worked flawlessly. I have not even needed to tighten it up.
25
250
Show More Reviews
See what our Experts say about this Softride Trailer Hitch Lock
- Replacement Lock for Softride Bike Rack Model 26321I'd recommend the Softride # SR25219 anti-rattle hitch lock as a replacement. Softride no longer manufactures bike racks, but we do have some of the locks. I've linked to a product demonstration video for you.
view full answer... - Softride Quietride Tightening Hitch PinRegarding the Softride Quietride Tightening Hitch Pin, item # SR25219, the distance between the inside of the bolt head and the locking portion when it is installed is 3-1/8 inch. The total length of the pin from the inside of the bolt head to the end of the pin is 3-13/16 inch.
view full answer... - Fit of Softride Locking Anti-Rattle Hitch Pin # SR25219 on Extra Wide Receiver Tube of 2012 TacomaPer my contact at Softride, their stainless steel locking anti-rattle hitch pin you referred to, part # SR25219 was lengthened about 1-1/2 years ago so that it will be compatible with the extra width of the OEM receiver tube on your 2012 Tacoma. The anti-rattle hitch pin would be a great choice for you as long as the shank of the ball mount or accessory you would use it with is hollow (most are).
view full answer... - What Keyed-Alike Hitch Pin Lock do You Recommend for My 2" Hitch? I have an answer about your keys. However, the keys for the Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches # SR25219 cannot be keyed-alike. For a great alternative that can be keyed-alike, I recommend the etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel # e98882. This lock has the same 5/8" pin diameter and has a similar inside pin span of 2-5/8". While it does fit 2-inch hitch receivers, it unfortunately does not...
view full answer... - Locking Hitch Pin Recommendation for a Carpod Cargo Carrier on a 2007 Toyota 4Runner SportThe Softride Locking, Anti-Rattle Hitch Pin, # SR25219, is an excellent choice to secure a Carpod basket to your 2007 Toyota 4Runner Sport Edition. This hitch pin will not only keep your basket secure, but it will keep the shank of the cargo basket tight against the receiver tube with the anti-rattle device. We carry two Carpod baskets and they are the Carpod Walled, Folding Cargo Carrier, # M2205, and the Walled, Fixed Cargo Carrier, # M2200. I would recommend using the Folding Cargo...
view full answer... - Is there a Lock Available to Go with Softride Threaded Hitch Bolt # SR25879The lock that goes with the Softride threaded bolt # SR25879 is now longer available for sale as a separate part. They are using a different design now and have discontinued that particular lock. But you can get a replacement by getting a whole replacement pin, lock, and anti-rattle part, # SR25219.
view full answer... - Anti-Rattle Device Recommendation for 2 Inch Trailer HitchesI do have a couple of possible options for you that will both fit the Curt trailer hitch # 13147 and the ball mount # D-4. First, if you do not need to have a lock we have anti-rattle device # MPG908. If a lock is desired, then take a look at # SR25219 from Softride. This works in much the same way as the above device except that it can be locked. I have included a link to a video review for you.
view full answer... - Drilling a Hole in a Receiver to Accept a J-Pin Anti-Rattle DeviceDrilling a hole in your hitch will void the manufacturers warranty. That being said you can purchase other styles of anti-rattle devices that will work very well and you will not have to modify the hitch to install them. I would recommend the SoftRide anti-rattle hitch lock, part # SR25219, this lock has a nut that installs inside the hollow draw bar or shank of the hitch accessory and then, when the hitch pin lock is threaded into the hitch, the ball mount or shank is wedged to the side...
view full answer... - Fit of Draw-Tite Max-Frame Trailer Hitch 75586 on a 2010 Toyota HighlanderDraw-Tite trailer hitch # 75586 would fit very snugly against your vehicle frame, as the mounting fasteners are installed and then torqued down to 42ft-lbs. You may find, however, that some accessories will fit snugly and others will fit more loosely in the hitch receiver. Small variances in paint and manufacturing tolerances can cause the same accessory to fit different hitches different ways. If you do find you have some rattle, you can remedy this by installing an anti-rattle device...
view full answer... - Can I Haul a Large Grill With 24x60 Railed Cargo Carrier, part # 63153As long as you are not above the weight capacity of your trailer hitch, the recommended tongue weight of your tow vehicle, and the 24x60 Railed Cargo Carrier for 2 inch Trailer Hitches, part # 63135, of 500 lbs, you should be okay. You will want to to also attach your grill securely to the cargo carrier, I would recommend something such as a 10 foot Ratchet Tie Down with Coated Hooks, 900 lbs (Qty 4), part # E01418. As long as your grill is not extraordinarily tall the height should not...
view full answer... - Can One Person Install Highland Moover Cargo CarrierThe Highland Moover Cargo Carrier you mentioned weighs a bit more than 70 lbs. A fairly burly person who ate their Wheaties that morning might be able to install the carrier by themselves, but most folks would need an assistant in order to install the carrier into the receiver on their vehicle. Using an anti-rattle hitch pin, part # SR25219 is recommended.
view full answer... - Will SoftRide Anti-Rattle # SR15219 Work With MaxxTow Adjustable Ball Mount MT70067It is not recommended to deviate from the original manufacturer components because the combination has not been tested together for fit, compatibility and safety. With that being said, I went to the warehouse and measured the holes of the MaxxTow MT70067 channel portion and the diameter is 11/16 of an inch and the diameter of the pin that comes in the package is a 1/2 inch. The SoftRide Anti-Rattle Hitch Pin # SR25219 has a pin diameter of 5/8 inch, which is 1/16th inch smaller than...
view full answer... - Will Softride Anti-Rattle Device and Lock Fit Brophy 2 Inch to 1-1/4 Inch Trailer Hitch ReducerThe end of hitch reducer sleeve # HT02 that fits into the 2 inch receiver is hollow and the Softride anti-rattle device and lock # SR25219, will fit. I have included a link to a video review of the lock for you.
view full answer... - Threaded Anti-Rattle Hitch Pin for a Cargo CarrierAs long as your cargo carrier has a hollow shank you can use the Swagman Anti-Rattle Threaded Hitch Pin # SR25219. It uses a nut inside the shank that the threaded pin tightens into. I've linked a video for you to take a look at.
view full answer... - Will the Carpod Walled Cargo Carrier # M2200 Fit a 2011 Honda Pilot TouringIn order to determine if the Carpod Walled Cargo Carrier, # M2200, or any trailer hitch mounted accessory will fit your 2011 Honda Pilot Touring Edition, you will need to measure the distance from the center of the hitch pin hole out to the distance required to clear the rear bumper. If that distance is less than 4 inches, the carrier will fit. The carry is designed for 2 inch trailer hitch receivers so it is compatible with the factory hitch on your vehicle. I have included a link to...
view full answer... - Stable Cargo Carrier Needed When in the Folded Up Position for a GMC Yukon Denali XLWe have several Folding carriers designed to fit in a 2 inch hitch, see link. The problem you are experiencing with cargo carriers wobbling in the upright position is inherent to the folding style of carrier and I have not seen one yet that fully addresses this issue. The folding aspect also requires that the carrier be basically level or just below level when folded down. This design is needed to keep the carrier from bouncing in the hinged portion when encountering hard bumps on the...
view full answer... - Is There A Repair Kit For The Trailer Coupler Latch on a Fulton 2" Ball Coupler? Fulton does not carry a repair kit for your 2" ball coupler. I recommend replacing your coupler with one easier to use like the Demco A-Frame Trailer Coupler # DM14793-81. This coupler can be bolted on and if the coupler latch wears our it can be replaced with the Repair Kit # DM6109. With this eZ-Latch system you only need to raise the handle to disconnect the trailer. This makes it much easier to just drop the trailer onto the ball and not add additional stress to the parts. I recommend...
view full answer... - Recommended Locking Hitch Pin For 2" Receivers That Can Be Keyed AlikeI may have another option but unfortunately you cannot order 3 of the SoftRide Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin # SR25219 Keyed Alike. There is not a keyed alike option for any generic anti-rattle threaded hitch pins but a standard hitch pin option is the etrailer Hitch Receiver Lock for 2" and 2-1/2" Hitches # e98881 which can be keyed alike by simply selecting the keyed alike option from the drop down menu above the add to cart button, and adding the quantity you...
view full answer... - Anti-Rattle Hitch Pin Recommendation for a Yakima Bike Rack with a 2 Inch ShankYou can use the Softride Locking, Anti-Rattle Hitch Pin, # SR25219, as long as the shank of your Yakima bike rack is hollow. The block will insert into the shank of the bike rack and the threaded pin will thread through and lock. If your Yakima bike rack has a threaded insert in the shank, then it should have come with a threaded pin. If this is the case, then let me know the model of your bike rack and I can see if we have a replacement pin for your bike rack. If the threaded insert...
view full answer... - Locking Hitch Pin for Yakima # Y02443 HoldUp Bike RackIf the threaded insert in the shank of your HoldUp is removable, you can remove it and use the # SR25219. If the insert isn't removable, the pin included with the Softride lock won't be compatible. Bike rack manufactures thread their bike rack hitch pin holes specific to their own products. They will not typically make their products compatible with products from other manufacturers. If the insert isn't removable, you'd need to use the Yakima hitch lock, part # Y07235 with the hitch bolt...
view full answer... - Which Trailer Hitch Pin Locks Will Work with Thule Trailer Hitch Mount Bike RacksThe Thule Snug Tite Hitch Lock and Anti-Rattle Device, # THSTL2, is the only hitch pin lock that can be used with Thule bike racks. The racks and lock are both uniquely threaded to be compatible with each other so another lock, like the Softride Lock, # SR25219, that you have referenced will not work. I have included a link to a video review of this lock for reference. I recommend adding a cable lock, like # e98891, and using it through the bikes, around the rack, and attach it to the...
view full answer... - Recommended Tow Bar Anti-Rattle Hitch Pin for 2 Inch Motorhome Trailer HitchesThe # SR25219 is not designed to be used for flat towing, but I do have a solution for you. The # RM-061 is only designed to be used in flat towing situations where a tow bar is used to tow a vehicle with 4 wheels on the ground. I have linked a review video of the Quiet Hitch in action for your convenience.
view full answer... - Recommended Locking Anti-Rattle Hitch Pin for 2" Hitch on 2018 Acura MDXI recommend looking at the Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches # SR25219, which is going to give you the security you need and does a great job at eliminating rattle on hitch mounted accessories. There really isn't an inconspicuous locking hitch pin, but the black lock body on this pin does a fairly good job of blending in with your hitch. I've linked a review video of this locking hitch pin for you to check out.
view full answer... - Anti-Rattle Hitch Lock For 2" Trailer Hitch ReceiverWe do have some alternatives as we discontinued carrying the J-Pin when Draw-Tite discontinued the additional hole for the J-pin last year. The Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches # SR25219 can be used with hollow shank 2" hitches. For solid shanks you can use a etrailer Hitch Receiver Lock # e98881 with a Draw-Tite QSP Trailer Hitch Silencer and Cover for 2" Hitch Receivers # 63080
view full answer...
Do you have a question about this Trailer Hitch Lock?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Patrick B
Video Edited:
Joshua S
Installed by:
Brent H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brian
1/14/2024
Its still performing great. No rust and holding tight.