Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks
(142 reviews)
Price: $37.50
In Stock
Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks
Retail:$51.09
Our Price: $37.50
You Save: 27%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
7% prefer this
- All Info
- Reviews (142)
- Q & A (0)
- Photos
- Used (1)
Swagman Trailer Hitch Lock
- Fits 2 Inch Hitch
- Rack Specific Locks
- Keyed Unique
- Swagman
- 4-1/2 Inch Span
- Chrome
- For Swagman Racks
- Threaded Pin
If you have a Swagman bike rack with the threaded shank, this is the lock you want! This lock is designed specifically for Swagman racks to prevent theft and the somewhat annoying sway that you might experience from time to time towing your rack.
Features:
- Secures 2" Swagman rack with anti-wobble shank inside a receiver tube
- Anti-wobble technology pulls the receiver bar tight to one side of the hitch and helps eliminate rattling
- Helps protect racks from theft
- Tubular high-security keys allow easy access with only a quarter turn to unlock
- Triple chrome-plated for maximum rust protection
- 2 Keys included
Specs:
- Application: 2" x 2" trailer hitch receivers
- Also fits wide factory 2" Toyota hitch receivers
- Overall length: 7-1/8"
- Usable length: 4-1/2"
- Length of threaded portion: 1-3/4"
- Length of non-threaded portion: 2-3/4"
- Pin diameter: 5/8"
- Limited lifetime warranty
Fits:
- All Swagman 2" hitch bike racks: S63381, S64400, S64152-2, S64663, S64665, S64675, S64693, S64698, S64698-99, S64940, S64970, S36FR, S44FR, S64FR, and S94FR
Using anti-wobble technology, the threaded pin pulls the Swagman hitch rack shank to one side of the hitch receiver, preventing movement during travel. Tubular high-security keys allow easy access with only a quarter turn to unlock. It is also triple chrome-plated for maximum rust protection.
64027 Swagman 5/8" Locking Anti-Wobble, Threaded Hitch Pin for 2" Receiver
Replaces 2001
Item # S64027
Customer Satisfaction Score:
88% were satisfied with this product
12% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks - S64027
Average Customer Rating: 4.7 out of 5 stars (142 Customer Reviews)
If you have a Swagman bike rack with the threaded shank, this is the lock you want! This lock is designed specifically for Swagman racks to prevent theft and the somewhat annoying sway that you might experience from time to time towing your rack.by: Cowboy Bill05/03/2011
A must have for the Swagman XTC-4 bike rack. Sure, I want to protect my bikes but I needed something that would protect my $200+ bike rack, too. You need a wrench to tighten the bolt, which does a good job of keeping the rack from rattling but is a pain because you always need to have a wrench around. But that's not the fault of the lock. The lock is pretty neat in that you can rotate the key hole so it's covered up to keep mud and weather out. I'd buy it again if needed and the price here at etrailer.com was good.
by: John M.05/09/2020
Great product. Fit bike rack / trailer hitch just as stated. So glad I found it online.
by: Mark06/12/2023
The product did not come with instructions. The videos at the manufacturer's site gave no instructions on installation. A video from a competitor explained how to install it. It can only be installed from the right side, that is the passenger side. A left-handed person, such as me, will naturally insert it from the left side. I did that repeatedly and of course it failed. Yes, I realize the world is right handed but a simple sentence saying it must be inserted from the right and not the left wouldn't take that much effort by the company. The same complaint applies to the bicycle rack itself.
by: richard10/30/2021
Installed both items within 15 minutes and am quite pleased with the results. A thunderstorm rolled through, as evidenced by the pictures, so I was unable to utilize the rack. I plan on riding the Ghost Town Trail tomorrow along with a friend. I rate these items with Five Stars !
by: Michael09/21/2022
The replacement lock has worked well. The original lock that came with the bike rack failed because the chrome plating came off the bolt and stripped out the threads when removing the hitch pin. I did add curt anti rattle hitch clamp.
by: Liz01/21/2014
Just received lock. Works great with the Swagman standup bike rack
with the 2" receiver. This lock was specifically recommended to me by
Swagman and is design for their 2" receiver.
by: landscape09/19/2015
solid bolt and lock assembly arrived early, well pkg'd. Exactly as advertised and the short video also helpful since original swagman bolt slightly different (uses cotter-pin instead of lock). Suggest to use a bit of grease for first time use. Locking washer added bonus. Key assembly smart design with default with having key stay with lock when lock is not on bolt.
Landscape
9/18/2016
fine except plastic cover to key fell off, not easy to put back on, does not affect functionality, may eventually corrode?
by: David02/19/2022
No fault to The lock it looks to be a good product but it is a 5/8" bolt and the swingman xc2 bike rack it was associated with takes a 1/2" bolt. I'm more disappointed with the sight linking these items together making it look like it will work together. Looking back at the rack details it does not have any notes saying it takes a 1/2" bolt so how would I know? Now I have to return the lock because I have no use for it.
by: Rick C.03/22/2012
Extremely difficult to align pin in receiver such that you can screw in the hitch pin. Besides-an identical one COMES WITH A SWAGMAN RACK SO DON'T WASTE YOUR MONEY ON A SECOND ONE! etrailer.com recommends this as an accessory, but is COMPLETELY UNNECESSARY! etrailer.com will also charge you for return shipping! What a ripoff!
Patrick B.
11/21/2012
The lock is listed in the Replacement Parts section on the product page. That way if an XTC4 owner loses a lock, they can come back to the product page and quickly find a link to the replacement lock.We list what is include with each rack in the product description.
by: Ray M03/31/2012
This came taped to my hitch in the blister pack. It screwed into the receiver and hitch extension very smoothly and holds the extension tight to prevent rattles. Good product.
Larry B.
11/18/2013
I lost my keys for my swagman lock . How do I get a replacement?
Patrick B.
11/26/2013
I double checked with Swagman and replacement barrel keys for their locks are not available. If the lock is currently installed, a reciprocating saw or a rotary cutting tool will be able to cut through the bolt.
by: Karl 06/03/2021
This product works just as advertised. It fit my bike rack perfectly and is easy to use. Of course it is brand new, but I have no reason to think it will not last for many years.
Karl
6/5/2022
Great question. We don’t use the rack a lot, but it still is working like new after a year. More companies should seek feedback long term. After all, isn’t that the measure of a quality product?
by: Ray09/06/2011
I received the Locking, Threaded Hitch Pin and installed it without any problems. The Swagman Bike Rack I purchased earlier came with the Anti-Rattle Threaded Hitch Pin, but without the Lock. The Swagman company rep that I spoke to said that the lock wasn't necessary, but it gave me peace of mind to have a lock on the Threaded Hitch Pin to prevent it from being jarred loose. Also, it makes it more theft resistant. I would rather have saved the money and gotten the locking mechanism without the threaded hitch pin, since I had this already piece, but it might be beneficial for some people.
The lock itself seems to work well. It goes on without the key; you just need to push it on. The key is required to remove it.
The threaded hitch pin does keep the bike rack from wobbling around. I tried to use a regular hitch pin, but that didn't work well at all since the 2" hitch seems smaller than my 2" receiver, so there is a lot of play in it. But with the threaded hitch pin it seems to work well. The one catch is that you need a wrench or socket set to install it or to uninstall it.
Overall, I am very happy with my purchase. I think that Swagman should include this with their racks, though. Also, it would be nice if the key for the lock used the same key as the bike rack so that you wouldn't need two separate keys.
Overall, I am very happy with my purchase. I think that Swagman should include this with their racks, though. Also, it would be nice if the key for the lock used the same key as the bike rack so that you wouldn't need two separate keys.
" />
by: Carl11/01/2018
Lisa in Customer Service was so very helpful. She noticed that in my Swagman bike rack review I needed a locking hitch pin and pointed me in the correct direction with the correct Swagman pin on E-trailer. I tried, like most, to purchase a cheap lookalike at my local hardware/superstore store. Had to take it back and contacted Lisa to send me the correct part. She did so at a very reasonable shipping cost.
Very happy with the Swagman hitch pin and the bike rack!!
Second somewhat large purchase from E-Trailer and both have been good quality and great service.
Thank you Lisa!
by: Peter W11/07/2016
Hitch goes on and off easily.
We have it on our RV and our bikes don't even quiver as we go down the road.
Lock is nice too.
Peter W.
11/15/2017
One year later and still working great!
by: Donna T06/25/2016
Locking anti-rattle, threaded hitch pin was the correct item to buy. We heard no rattle while driving and stopped twice in our 4 hour trip to check the bikes. Everything was just as tight and sturdy as when we started our trip. Highly recommend this product.
by: Robert S09/02/2017
This lock is the best, it works just as the ad says, it fits perfect and you feel your bike rack will be there when you come back and no noise when driving so I would say this lock is well worth the investment, thanks again etrailer RS
by: Diane G.05/30/2017
Already purchased one several years ago for our Swagman bike rack to lock it on our SUV trailer hitch, so I bought another one to have on hand in our RV.
by: Jim C09/10/2016
I received this product in just a few days. It was exactly what I was looking for. I have a Swagman Bike Rack which uses a screw tightening hitch pin. In order to deter theft of my bike rack this specific hitch pin has a locking feature. The products appears to a good fit and good design. I hope to have years of use.
by: Mark 03/10/2021
Love the locking mechanism for my bike rack! I have been holding off on bringing my bikes on trailer trips for fear of theft, but this will do the trick perfectly. Once again, e-trailer has come through with a terrific product managed by the best customer service staff around.
by: Bill S.08/24/2018
This bike carrier lock by Swagman is ideal. Chrome plated to resist rusting is very nice. The way the lock works is also outstanding, provides a nice cover over the key hole to keep the elements out.
This lock replaces the exact original one that came with my Swagman carrier that I lost by my own stupidity.
Etrailer.com is great to work with for all your RV needs FIVE STARS all the way......
by: Ian07/03/2013
Just mounted on my camper, seems solid. A bit odd that the lock piece does not mount tight to the hitch it is just a lock NOT a retainer although the threads seem to take care of that....I may add a hole for a pin.
by: JoeJ03/25/2016
Use with Swagman 2 bike Traveler rack on my Tacoma. Easily holds my XL frame cross bike and my wifes smaller mountain bike. NO rattles and locks in securly, easy open
by: Hilary08/14/2020
We had ordered the wrong lock to go with a rack and etrailer called asking if it was OK to change the order to this lock. It was also cheaper. Fantastic service. Thank you so much!
by: Bob L.03/24/2014
The Hitch Pin worked as advertised. The bike rack does not rattle or sway. The product arrived earlier than originally stated. Very satisfied.
Thanks
by: George02/07/2021
Solid piece of gear, does it job so people can not steal my bike. Swagman should make it the standard to sell the bike rack with the locking pin.
25
142
Show More Reviews
See what our Experts say about this Swagman Trailer Hitch Lock
- Will Swagman Original 4 Bike Towing Rack work for 2018 Ram 1500?Yes, the Swagman Original 4 Bike Towing Rack # S64675 will fit the 2018 Dodge Ram 1500 as long as your Ram has a 2 inch receiver opening. It allows you to carry all four bikes and tow a trailer with this tilting bike rack. Cushioning grips your bike frame as the top plate is tightened down. Install your hitch ball, lock the rack in the upright position, and you are ready to tow! Along with the Swagman bike rack, the Locking Anti-Rattle Threaded Hitch Pin lock # S64027 is recommended! This...
view full answer... - Recommended Bike Rack to Carry at Least 2 Bikes and Sometimes 4 on Back of 5th Wheel TrailerI have some solutions for you, but there is not an expandable Thule rack that is rated for use on the back of a 5th wheel trailer. Instead, I recommend using the Swagman Trailhead 4 Bike Carrier # S63381, which is a 4 bike rack that is designed to be used on the back of a 5th wheel trailer or vehicle with a 2" receiver. The Trailhead is a great value rack that will stand up to the rigors of travel on the back of your 5th wheel and give you the flexibility to carry up to 4 bikes. The Trailhead...
view full answer... - Locking Hitch Pin For Swagman Bike RackWe do have locking hitch pins that work with Swagman bike racks, though the one you mentioned will not, because bike rack manufacturers have their own unique thread. So what you will need instead is a lock from Swagman, and the right one will depend on if your Swagman Rack fits 1-1/4" & 2" hitches, or only fits 2" hitches. - 1-1/4" & 2" Hitches: Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks # S64029 - 2" Hitches Only: Locking Anti-Rattle, Threaded Hitch Pin for Swagman...
view full answer... - Bike Rack for Use Behind Fifth Wheel or Travel TrailerThere are bike racks available for the rear of a fifth wheel or travel trailer, though they must be rated for such by the manufacturer because it is a far rougher ride than the rear of a standard vehicle and could result in the rack and bikes being damaged. There are no 5-bike racks such as the Curt # C18065 that can be used behind a trailer, but a similar 4-bike rack I recommend is the Swagman Trailhead # S63381. This hanging rack secures your bikes at three different points, ensuring...
view full answer... - Replacement Threaded Hitch Pin For Tow Ready Hitch Mount Bike CarrierIf you have a 2 inch shank on Your Tow Ready Bike carrier the replacement threaded hitch pin you need is part # P5901. This is a 5/8 inch pin that includes the threaded pin and clip to hold your bike secure in the trailer hitch. If you want a locking hitch pin I recommend part # S64027. This is also the threaded hitch pin for a 2 inch receiver. This comes with 2 keys and has a protective cover to keep dirt and debris out of the lock.
view full answer... - Is There A Hitch Pin Lock For Swagman Expanse Cargo Carrier?Yes, you can use Locking Anti-Rattle, Threaded Hitch Pin # S64027 to lock your 17x50 Swagman Expanse Cargo Carrier # S68FR to a 2" trailer hitch receiver. I attached a helpful demonstration video for you.
view full answer... - Recommendation for Trailer Hitch Pin Locks that Can be Keyed AlikeThe lock that you have referenced, # S64027, is designed specifically for use with Swagman bike racks and will not work with a tow bar because it is uniquely threaded. Instead, you can use Trailer Hitch Receiver Lock, # e98880. You can choose the keyed alike option and then select the quantity and you receive all the locks keyed alike. The hitch pin lock does not have a specific capacity but it is more than strong enough for your application. I have included a link to a video review of...
view full answer... - Recommended Locking Anti-Rattle Hitch Pin For The Swagman Traveler XC2 Bike RackThe Swagman Traveler XC2 Bike Rack for 2 Bikes - 2" Hitches or RV Bumpers - Frame Mount Item # S64663 comes with an anti-rattle hitch pin but if you want a locking one you'll need the Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks Item # S64027
view full answer... - What Is the Thread Pitch for Hitch Pin on Swagman XCT Bike RackI do have an option for you but bike rack manufacturers don't publish their hitch pin thread specs to discourage from using a different hitch pin from another manufacturer so this I cannot provide. That said, I can confirm the Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks part # S64029 for 1-1/4" or part # S64027 for 2" are correct for a Swagman XCT Bike Rack.
view full answer... - Recommended 2-Inch Hitch Bike Rack for 24-Foot RV with Rear Spare TireWe do offer 2-inch hitch bike racks that are approved for use on the rear of an RV. These are made to handle the extra physical stresses found at the rear of motorhome and trailers. We do not recommend using any type of extension/adapter in your RV hitch as this could potentially damage your hitch due to the additional leverage this would apply to the hitch tube. You'll want to measure from your hitch pin hole to the rearmost part of the RV (probably the outside edge of the spare tire)...
view full answer... - RV-Rated 3-Bike Rack & Hitch for 2016 Coachman Clipper Pop Up Camper TrailerCurt RV hitches # C19101 and # E-100 will not work on a C-channel bumper so you may want to consider a frame-mounted RV hitch like # 13703 or one of the others shown on the linked page. These have a 2-inch receiver opening for your bike rack or other RV-rated accessory and the various model fits varying frame widths; some are bolt-on while others are weld-on products. You can confirm in your owner's manual whether Coachman rated the camper's frame for hitch installation. A bike rack to...
view full answer... - Can the Kuat Beta 2 Bike Rack be Used Behind 5th Wheel Trailer I do have a solution for you, however the Kuat Beta Folding 2 Bike Rack # B202-2 referenced in your question is not rated for use behind a trailer. Because of the extra movement and stress that is put on a bike rack when it is mounted to the rear of a trailer, only certain bike racks are approved by the manufacturer to be used in this manner. Folding racks like the Kuat Beta typically cannot be used, as the folding feature creates a point of movement that can result in failure when exposed...
view full answer... - How To Carry 5 Bikes On Jayco Travel Trailer 28BHSI do have an option for you however, there is not a hitch mounted bike rack option to carry 5 bikes on the back of the Jayco 28BHS. I recommend to use the Jack-It 2 Bike Rack for A-Frame Trailers part # LC429756 which will allow you to carry 2 bikes on the A-frame of the trailer above the jack. This option is also provides 22" of clearance above the jack which is what you will need for the Jayco 28BHS. I have attached a photo and video for your reference. For the other bikes, Swagman Trailhead...
view full answer...
- Locking Anti-Rattle Hitch Lock For Nashbar Bike Rack That Uses a 1/2" - 13 Thread Pitch BoltI recommend the Anti-Rattle Hitch Lock # SR0901 as it has the same 1/2" - 13 thread pitch that you current bolt has. Included with the hitch lock are 2 keys a washer and lock washer to ensure that it does not loosen on you when it is in your receiver. The Swagman Locking Anti-Rattle, Threaded Hitch Pin # S64029 uses a 1/2" -12 thread pitch and the Swagman Locking Anti-Rattle, Threaded Hitch Pin # S64027 is a 5/8" thread. So they will not work for your application.
view full answer...
- Recommended Hitch Receiver and Bike Rack for Use Behind TrailerStarting with the hitch receiver for your trailer, if you indeed have a 4 x 4 inch bumper, the Ultra-Fab # UF35-946401 that you referenced is what I recommend. This is designed to attach to 4 inch x 4 inch square bumpers with the included hardware and U-bolts. If you are just looking to use the 2 inch receiver for hitch-mounted accessories like bike racks, this is a great option and it will work well. Moving on to the bike rack, the Kuat Beta was a really nice 2-bike hanging-style rack,...
view full answer... - Can the Locking Threaded Hitch Pin for Swagman 2" Hitch Racks Be Ordered with Specific KeyThe Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks part # S64027 will come with a unique key code, it does not have the ability to be ordered with a specific code unfortunately. The only option Swagman offers for keyed alike locks (when purchased separately) is the Anti-Rattle Hitch Lock and Cable for Swagman Bike Racks part # S64030 which comes with a bike and hitch lock.
view full answer... - Hitch Lock Recommendation for a Pro Series Eclipse Bike RackThe recommended hitch lock for the Swagman Original Bike Rack part # S64400 that you referenced is the Trailer Hitch Lock part #S64027. I attached a link to the product page for you to check out as well as review video for the lock.
view full answer... - Longest Span Hitch Pin Lock The closest option we have available to what you are needing is the Blue Ox Trailer Hitch Receiver Lock item # BX88212. This heavy-duty lock features a 5/8" diameter and a usable length of 4-3/8". This usable length represents the longest option we have available for standard locking hitch pins. I have linked a diagram below. We do have a threaded locking pin that spans 4-1/2" but it is for a bike rack. It is the Locking Anti-Rattle, Threaded Hitch Pin for Swagman 2" Hitch Racks item # S64027.
view full answer...
- Cannot Remove Hitch Lock On Swagman Dispatch 2 Bike Platform RackIf you leave the hitch lock for the Swagman Dispatch 2 Bike Platform Rack part # S44FR on for too long or there has been dirt that has gotten inside the lock core then there is a possibility that the lock can get stuck. I recommend that you spray some lubricant around the head and then gently hit the head with a hammer to try and break it free while also turning the key back and forth. If all else fails then you will need to drill out the lock or cut off the head. This can then be replaced...
view full answer... - Can the Swagman Platform-Style Bike Rack 64663 be Installed on a Trailer HitchYes, you can use the Swagman Platform-Style 2 Bike Rack # S64663 with a 2" receiver, like the Curt # E-100 that you referenced, or with the bumper mount that comes with the bike rack. To ensure that this fits your application you can measure 6-3/4" from the front end of your bumper as that is about where the rearmost cradle will sit of the Swagman bike rack. If you would like to add locks to this bike rack then part # S64027 will lock the bike rack while 2 of the padlocks # 131D will...
view full answer... - Recommended Hitch Mounted Bike Rack for Mercedes-Benz Sprinter RVThe local bike shop was correct in saying that the Thule Apex Swing 4 Bike Rack, # TH9027, and we don't recommend it for an RV application either. RV's in general have more movement at the rear because the distance to the hitch receiver is further from the rear axle. Fewer moving parts on the rack helps isolate possible wobble and wear on that hitch receiver and the bike rack itself. One of the nicest bike racks for an RV is the Swagman XP, # S64940. This rack carries up to 4 bikes and...
view full answer... - Will the Swagman XTC-4 Bike Rack # S64665 Work on a 2011 Subaru Forester with Class III HitchWith a Class III, 2 inch, hitch on your Subaru Forester you will only need to make sure that the weight of the bike rack, 65 pounds, and the weight of the bikes you are carrying are less than the tongue weight limitation of your hitch and your vehicle. The tongue weight capacity of your vehicle can be found in the owners manual and the hitch tongue weight capacity should be stamped into the hitch near the receiver or listed on a sticker attached to the hitch. For the Swagman XTC4, item...
view full answer... - Is There a Threaded Hitch Bolt Lock Compatible with Rola Carrier?The Rola Carrier uses a threaded anti-rattle bolt that is 5/8 inch and 11 threads per inch. The Swagman # S64027 and the HitchMate # HE6001 unfortunately will not fit. You will either need to use a different lock like a cable lock or drill out the threads and use an alternative method like the Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 2-5/8" Span # 63232.
view full answer... - Will the Swagman XP # S64970 Fit a 2011 Honda Pilot The Swagman XP # S64970 is compatible with 2" trailer hitches so if that is what you have on your 2011 Honda Pilot then it will fit. The other part of fit pertains to clearance from the center of the hitch pin hole to the rearmost part of your vehicle. For some vehicles this is just the bumper and for other vehicles this is a spare tire. This bike rack measures 7-3/4" from the center of the hitch pin hole to the back of the upright bar. If from the center of your hitch pin hole to the...
view full answer...
Do you have a question about this Trailer Hitch Lock?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Installed by:
Jeff D
Installed by:
Kathleen M
Installed by:
Cole B
Installed by:
Evangeline M
Video Edited:
Joshua S
Updated by:
Adele M
Updated by:
Brian B
Updated by:
Leah S
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Noah M
Updated by:
Manda E
Video by:
John S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Liz
1/21/2015
Still works great. Very satisfied.