Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the threaded anti-rattle hitch bolt for your Yakima BigHorn, DoubleDown, FlipSide, or SwingDaddy bike rack. Also works with Yakima DryDock boat support carrier. Includes 2 washers, (1) 1/2" hitch bolt, and a clip.
Features:
Fits:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a brief look at this replacement anti-rattle hitch bolt for your Yakima bike racks. This is going to replace the threaded anti-rattle hitch bolt for your Yakima BigHorn 4, DoubleDown, FlipSide, HoldUp, or SwingDaddy bike racks. And this is also going to work with your Yakima DryDock boat support carriers as well. On your screen, as you can see, I have included the item numbers for you for your reference.
And as you no doubt know, this bolt secures your hitch mounted bike or boat carrier to your vehicle's hitch receiver. And it includes everything that you see here. You're gonna get one half-inch hitch bolt, two washers, and one clip. So, whenever you're going to put this into place, you just want to make sure that you put the split washer under the head of the bolt and then follow that up with the flat washer. And then you're gonna tighten this down using a 3/4 of an inch or 19 millimeter wrench.
You, of course, wanna make sure that it's nice and tight. And put the clip into place and you are in business. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy.
Thank you for joining me..
Average Customer Rating: 4.8 out of 5 stars (122 Customer Reviews)
Replaces the threaded anti-rattle hitch bolt for your Yakima BigHorn, DoubleDown, FlipSide, or SwingDaddy bike rack. Also works with Yakima DryDock boat support carrier. Includes 2 washers, (1) 1/2" hitch bolt, and a clip.I was replacing a hitch pin on a very old, 20 years plus, Yakima, bike rack. I hit a lot of dead-ends in my search, I was finally referred to etrailer. It was there that the customer service team helped me troubleshoot The replacement part I need. The part arrived before it was promised and if it’s perfect. Wish I had gone to etrailer before all this. Sorry, no photo but I think you’ve seen an old rack on an old van before.
Bike hitch pin was exactly what I needed. Excellent website for efficient purchase coupled with outstanding customer service ensured that I will remain a customer.
Worked great to secure a 1 1/14" BigHorn rack with a 2" adapter. The Original pin's threads were not long enough. This pin fixed that.
Pics attached of the Yakima Spine, I am guessing you will be off for the Holiday weekend and have been great help, thanks and let me know . I have taken pics indoor lighting and direct sunlight
Works as advertised. No problems.
Seems to be a good replacement fit. Part was as expected.
I needed a longer hitch pin. This is exactly what I needed. Easy to order and came very quick. Fantastic service and the right product.
It was the right fix and worked like a dream.
This unique bolt is a life saver when you're converting from a 1.25 hitch to 2-inch hitch for your Buck horn 4 bike rack.
All I can say is, perfect the first time around!
This was quick to ship, on-time delivery, and exactly what I ordered. Thank you!
I had been looking for the mounting hardware for my Yakima DoubleDown and everywhere I checked they were out of stock. Then I was given etrailer's information and they had the part and shipped it the same day. My Customer Service Rep, William B was professional but also very personable. He was extremely helpful to me and I can't say enough about his customer service care to me. I highly recommend anyone to check etrailer out first before going anywhere else for their needs. They seem to have everything someone would need in relationship to sports and rec, trailers, vehicles, RV and campers, marine and towing. The list goes on.
Thank you again etrailer!
Exact Yakima replacement for my Yakima DoubleDown hitch mounted bike rack.
Purchased a pre-owned DoubleDown hitch mounted bike rack and it did not include the mounting hardware. etrailer saved the day with having this item available for purchase. Thank you!
It was the right fit for my doubledown Yakima bike rack.
Just what I needed!! Fast response, and quality service
I needed a part for my Yakima bike carrier and etrailer was the only place I could find it. They shipped it to me very quickly and then followed up to ensure I received it. Part is working great! Service was excellent!!
Extremely fast shipping
This pin fits my older Yakima hitch mount bike rack (I think it is a bighorn 4) and it also fits my newer Toyota Sequoia, which has a wider receiver, which was too wide for the original pin. Now I can carry bikes on my Sequoia! :)
Sales rep was very helpful. I needed a hitch pin for a Yakima bike rack I bought at an estate sale. I didn't know what rack I bought as there wasn't any paperwork or information plate on rack. She called Yakima and tried to find out what pin I needed. Unfortunately, the pin they came up turned out to be wrong pin. But can't blame eTrailer. They did all they could with the information I had.
I misplaced this part to my bike rack. I have been looking for a replacement. Vendors I found who carry the 5/8" diameter bolt are out of stock. The description for this bolt does not include the diameter, so I took a chance. And lost. This bolt is 1/2" diameter.
Got the correct part and fast. Thanks
This fit my Yakima hitch mount bike rack as described. An affordable after-market solution to what Yakima insists on making a proprietary-sized item. Thanks etrailer for the great website, product description, and product reviews.
For what it is, it's a nice piece of hardware. But, it doesn't fit on the rack I ordered it for. I have a Yakima SwingDaddy, and this should have fit it, but the original nut in the rack was metric, and the threads on this are standard. I replaced the nut in the rack and moved on. I especially like that this has an end that fits in a hitch-pin lock.
Quick service
Exactly what i needed
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sierra K.
7/19/2021
Thank you for your review. Please call into Customer Service and let us know which Yakima bike rack you have and we will try and locate the replacement parts. The number is 800-298-1624.