Replacement 24-1/2" Left Rear Leg - Lippert Ground Control 3.0 Electric Leveling System
(46 reviews)
Price: $580.16
In Stock
Replacement 24-1/2" Left Rear Leg - Lippert Ground Control 3.0 Electric Leveling System
Item # LC305339
Retail:$749.35
Our Price: $580.16
You Save: $169.19
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (46)
- Q & A (0)
- Videos (1)
- Photos
Lippert Accessories and Parts - LC305339
- Camper Jacks
- Trailer Jack
- Legs
- Follow Leg
- Lippert
Replaces 1 rear left leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad (LC225598) is sold separately.
Features:
- Replacement left rear leg for your Lippert Ground Control 3.0 electric leveling system (LC358590 or LC675817)
- Leg includes the mounting bracket needed for installation
- Snapper pin to attach footpad (LC225598) is sold separately
Specs:
- Total lift: 12-1/2"
- Overall height:
- Retracted: 24-1/2"
- Extended: 36-3/4"
- Capacity: 5,000 lbs
305339 Replacement Left Follow Leg for Lippert Components Ground Control 3.0 Electronic Leveling System - Qty 1
Video of Replacement 24-1/2" Left Rear Leg - Lippert Ground Control 3.0 Electric Leveling System
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Lippert Ground Control Replacement Leg Review
Today we're going to be taking a look at Lippert's replacement rear leg for the ground control three leveling system. These are available for either the left or the right for either your four point or six point leveling system. These jacks are going to be a direct replacement for your factory originals. So whether your jacks are worn out and no longer functioning from age, or if you had some sort of collision that's damaged them, these are a nice easy replacement. And you don't have to replace your entire system, just that particular damaged jack.The replacement jack only includes the jack, so you want to make sure that you save all of your mounting hardware to get your new one installed. On the six point replacement jack, the foot pad is made onto the jack.
However on the four point system replacement jack, the foot pad is removable, and the pin that holds it on does not come included. So you want to make sure that you maintained your pin from your original jack. If need be, you can purchase additional replacement pins here at etrailer.com.With these replacement jacks, you can have the comfort of knowing that they are factory original replacements, and they're going to bolt right up guaranteed. Our motor's burnt out on this one here, so we're going to need to replace it. We'll begin the replacement by disconnecting the electrical connectors.
So you're going to want to follow the leads from the motor, pull those down. You'll disconnect them by pressing on the release tab, and pulling them apart.Next you'll simply need to remove all the bolts that are holding it in place. On our particular unit here, we're going to be using a 19 millimeter socket and wrench to remove those. To get to the top ones, I recommend only removing them partially, leaving some of the nuts still threaded on to hold it in place because it is quite heavy.Now we've got them most of the way removed, you can support your jack and remove the rest of the hardware by hand. I like to just leave the bolts in there and just remove those with the jack.
We'll now set it down and get our replacement. An exact replacement for the factory originals, and it installs just in the reverse order of how we removed it. Now when you removed your old one, you want to remember which holes that you used because it does have a height adjustment with these holes. If you're questioning it, you can always take a peak at the other side because the other side is going to have the same distance as this side.With all of our bolts in place, we can tighten them back down using that 19 millimeter socket and wrench. Then torque it to the manufacturer's specifications.
Now we can plug in our electrical connectors. And you're all set, ready to go on your adventures again. And that completes our look at Lippert's replacement rear leg for the ground control three leveling system.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
- Did not fit
Customer Reviews
Replacement 24-1/2" Left Rear Leg - Lippert Ground Control 3.0 Electric Leveling System - LC305339
Average Customer Rating: 4.9 out of 5 stars (46 Customer Reviews)
Replaces 1 rear left leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad (LC225598) is sold separately.by: Rob 05/05/2024
OEM replacement part for my Lippert sys tem.
by: Elda11/23/2021
They work great! They fit perfectly and they both went on easy and fast as our replacements. We were able to auto level within a few min after installing.
by: Travis 07/25/2023
Everything was as expected except the manufacturer did not send the pin to attach the bottom plate. Other than that, it’s perfect. Good customer service and shipped when expected.
by: Frank 02/18/2023
The box arrived torn and the UPS driver said it happens all the time. Luckily the parts I need are OK.
I would like to have been reminded that the "snapper pin" is NOT included with this kit.
Otherwise this will correct our situation.
by: Daryl04/20/2020
I had to replace one of these on my camper after a small backing incident that bent the jack housing. I called etrailer and the folks there helped me identify the correct version of the jack and then got it shipped to me quickly. It was direct replacement, so the install was quick and easy. Now I have a spare motor!
by: Ronald 05/15/2023
Had to replace one. Order came in fast. Plugged it in and worked great
by: Gary09/23/2022
Fast shipping! A perfect replacement. Auto-leveling works again. I did have to use the hardware from the damaged jack, but it worked fine.
by: Larry C09/30/2021
Bent the original leg on a concrete curb while traveling with our Jayco Pinnacle 5er to Ark. Etrailer promptly delivered the replacement to our favorite RV campground. Easy to put on. Worked right out of box. No error codes, so didn't even have to re-program the Lippert Level Controls. Used a dozen times this last year with no problems.
by: Tony Gutierrez07/04/2017
Sirs,
I wanted to let you know that I replaced the damaged leveling leg of my trailer with the one I received from you. It took a little work because I ordered the wrong side. After installing and connecting it, I tried performing an automatic leveling. And guess what, it worked perfectly. I did download the procedure to accomplish it.
Thank you very much for your quick delivery and correspondence.
Tony Gutierrez
by: Murray09/29/2022
The product appears to be right and showed up very timely. It is missing the pin that holds the foot plate on but I will try to reuse the one off the old unit. I have yet to install it but am assuming at this point (since it is new) that it will work just fine.
by: Bret03/07/2018
Perfect fit and works as it should. Direct replacement for left rear jack for LCI on 2016 Montana high country leveling system 3.0
Thank you for the help
by: Autumn09/23/2020
Part arrived very fast, even with the pandemic going on! I have ordered from etrailer many times and have been extremely satisfied each time. This is a company you can trust for quality RV parts!
by: Brian 09/21/2021
This replacement jack was an easy install. My first. Plug and play, if you will. After homing the jacks and running a zero calibration, I was good to go.
by: Michael 08/07/2022
perfect replacement to my original jack.
by: Ryan 11/16/2020
Excellent Phone Service!! Product delivered on time and correct one!! Could not be happier!!!
by: Jeremy 03/09/2023
Fast shipping and works great!
by: Kaykeey10/21/2020
Fast shipping. Parts exactly what we needed. Order woman was extremely patient, helpful and efficient in assisting me in figuring out what parts I needed.
Thanks so much!
by: Helen 12/22/2022
Excellent service, quick free delivery. Can’t ask for more.
by: Jemar03/24/2022
Perfect fit. Plug and play. The best customer service I have ever received. Super fast shipping.
by: John06/21/2019
The product worked great out of the box, fast shipping. eTrailer is easy to work with.
by: Kayla 08/31/2020
big fan of etrailer they always ship faster than expected!
by: Ray 08/22/2022
Order came a couple of days before I thought. Part was well packed.Part was a perfect match. Installed and works great.
Excellent service
by: Fernando V09/23/2022
Pack a little better. Worked perfectly!
by: Marc07/23/2021
Great product, did the job, fit as expe cted!
by: Belinda 08/08/2021
It came quickly and works great.
25
46
Show More Reviews
See what our Experts say about this Lippert Accessories and Parts
- Troubleshooting An LR Error Code On A Lippert Ground Control 3.0 Leveling System An LR error code would indicate an electrical error with the left rear jack. You'll want to start by checking the fuses on your controller to ensure that it hasn't blown. You can use a circuit tester # PTW2993 and touch it to both contacts on the top of the fuse to check for power. From there you would need to trace the wires back to the jack to see if there's any damage, loose connections, or corrosion. If you find no damage then I would test the power at the jack using a multimeter...
view full answer...
- Replacement Lippert Ground Control 3.0 Left Middle Jack LegLippert does sell the motor separately but unfortunately not the leg unit. If you are needing the leg unit then you will need to purchase the entire rear jack. Thank you for the picture and your description. Between the Replacement # LC305339 and # LC342610 jacks you need the part # LC305339. I went out to the warehouse and verified that the outer leg measures 19" just like your part. The other jack is 2" shorter than this jack so it wouldn't work properly.
view full answer...
- Does the Replacement Left Rear Leg for Lippert Ground Control 3.0 Have Hall Effect SensorI believe what you are asking about is the hall effect sensor. Yes, the Replacement 24-1/2" Left Rear Leg - Lippert Ground Control 3.0 Electric Leveling System # LC305339 does have the hall effect sensor in it. Assuming you have the Lippert Ground Control 3.0 automatic leveling system # LC358590 or # LC675817 this is the replacement leg you are looking for.
view full answer... - Can You Use a 6-Point Ground Control Jack on the 4-Point SystemI was honestly unsure on whether the jacks are interchangeable so I reached out to the manufacturer. For the most part you can use the Replacement 22-1/2" Left Rear Leg for Lippert Ground Control 3.0 Electric Leveling System # LC342610 (428493) in place of the Replacement 24-1/2" Left Rear Leg - Lippert Ground Control 3.0 Electric Leveling System # LC305339 (305339). I have included what the manufacturer told me below. "jack 305339 could be replaced with jack 428493. It would have to...
view full answer... - Replacement Legs For 4-Point Lippert Components Ground Control 3.0 Electric Leveling SystemI do have an option for you but the inner jack leg is not replaceable therefore if these were bent then you will have no other option but to replace the entire jack leg. I have attached for you below the correct replacement jack legs for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part # LC358590. Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System part # LC305340 Replacement Right Rear Leg for Lippert Components Ground Control...
view full answer... - Correct Replacement Rear Lippert Ground Control Landing Gear Legs for Trailer The correct replacement rear legs for a Lippert Ground Control 3.0 Leveling System are the Replacement Leg for Lippert Ground Control 3.0 Electric Leveling System part # LC344792 for right rear or part # LC305339 for left rear.
view full answer... - Replacement Brackets And Legs For A Lippert Ground Control 3.0 Leveling System If the portion of your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC358590 that is bent is the bracket that attaches to the I-Beam you can replace it with the Replacement I-Beam Jack Bracket for Lippert Ground Control 3.0 # LC349975. If the bracket on the leg is damaged then you'll have to replace the entire leg. For the left rear leg you'll need # LC305339 and for the right rear leg you'll need # LC344792. The front legs of the Ground Control 3.0 can be replaced...
view full answer... - Correct Replacement Legs for Lippert Ground Control 3.0 Leveling System - 6 PointYes, we do offer replacement jacks for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System - 6-Point Set part # LC675817. I have attached these for you below by their location on the trailer. Rear/Middle: 24-1/2" Leg part # LC344792 (RR or RM) 24-1/2" Leg part # LC305339 (LR or LM) 22-1/2" Leg part # LC342610 (LR or LM) 22-1/2" Leg part # LC428493 (RR or RM) Front: Replacement Front Jack part # LC362485 Please note, the rear legs only come as a complete assembly with...
view full answer... - Availability of Replacement Rear Left Leg for Lippert 3.0 Leveling System I spoke with my contact at Lippert regarding the Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC358590. She stated that the front legs on this system are available without the motor, but the round rear legs are only available as an assembly with the motor already attached. The rear legs are not available by themselves. To replace the left rear leg on your system, you will need the Replacement Left Rear Leg # LC305339.
view full answer... - Replacement Jack For A Lippert Hydraulic Leveling SystemIt sounds like you are needing to replace one of the rear legs for your Lippert Ground Control leveling system. The Rear legs have a mounting plate with 11 holes. So I believe we are on the same page here. There are going to be a few options for the leg, and we should be able to narrow it down pretty easily. We just need to know if it is a left or right hand side jack, and we need to confirm the retracted height. There are 22-1/2" legs and 24-1/2" legs. For a replacement leg we have the...
view full answer... - Replacement Rear Legs for Lippert Ground Control 3.0 System for Leaking MotorIt would be time to replace the leg assembly since the motors by themselves are not replaceable. So if you have the 4 point system and you need the right rear leg you'd want the part # LC344792 or for the left rear leg # LC305339. If you have the 6 point system you'd instead want the part # LC342610 for the left rear leg or part # LC428493 for right rear.
view full answer... - Troubleshooting Squeaking and Out of Stroke Errors on Lippert Ground Control The noises you described in your question along with the "Out of Stroke" error message you're getting might be indicating some internal damage with the gears on the jack leg(s). The "Out of Stroke" error basically means that the jack has extended as far as it can go, so if you're getting the message after only 4 inches of extension then there's something preventing it from going further such as a bent pin or stripped gear, which would require that the leg get replaced. The only lubrication-type...
view full answer... - Can The Auto-Level Feature Be Used On A Lippert Ground Control 3.0 System With A Damaged LegWith the leg of your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC358590 being that bent the auto-level feature would either not function at all (if it's damaged enough to sense there's an issue) or wouldn't be able to properly level the trailer and throw an error code anyway since the foot of the leg can't get a steady foothold. You can still manually lower or raise your legs since this appears to be a rear leg but auto-level isn't going to be an option until...
view full answer...
- Middle Left Leg Replacement on Lippert 6 Point Ground Control 3.0 SystemI have a solution for you, and while you can purchase front legs without the motors, the middle legs on the Lippert 6 point Ground Control 3.0 system # LC675817 are the same as the rear legs. Because of this, there is not going to be a replacement middle leg without the motor available. In order to replace the middle leg, you'll want to measure the length of the outer tube on the jack leg to determine which leg will be the appropriate replacement. If your left middle leg measures 17"...
view full answer...
- Correct Left Middle Jack for Lippert Ground Control 3.0Yes, the middle and rear jacks for the Lippert Ground Control 3.0 # LC675817 are the same so you just need to measure the overall height of your jacks to determine if you need the 21-1/2" Leg # LC342610 or the 24-1/2" Leg # LC305339. Attached is a video of this replacement leg for you to check out.
view full answer...
- Recommended Replacement Jack Legs for a Lippert Ground Control 3.0It would depend on what leveling system you have currently, however if you have the Lippert Ground Control 3.0 then you could use: -The Replacement Front Jack for Lippert Ground Control 3.0 Leveling System # LC362485 for a front jack, -The Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System # LC305340 for a lead leg, -The Replacement 24-1/2" Left Rear Leg # LC305339 or # LC342610 for a left rear leg, and the Replacement 24-1/2" Right Rear Leg # LC344792...
view full answer... - Replacement Rear Jack Leg For A Ground Control 3.0 On A 2017 Forest River Wildcat 327RE Since you have a Lippert Ground Control 3.0 Electronic Leveling System # LC675817 or # LC358590 you would need to measure the retracted length of the other rear leg to ensure you're getting the correct replacement and then could choose from either the left or right side replacements, which I've listed below: 22-1/2" Right Side # LC428493 22-1/2" Left Side # LC342610 24-1/2" Right Side # LC344792 24-1/2" Left Side # LC305339 The orientation for left or right is decided by the motor,...
view full answer... - Replacement Rear Leg and Bracket for Lippert Ground Control 3.0The correct replacement leg will depend on your retracted height as well as the side the leg is on. We have the following available: -Replacement 24-1/2" Right Rear Leg # LC344792 -Replacement 22-1/2" Right Rear Leg # LC428493 -Replacement 24-1/2" Left Rear Leg # LC305339 -Replacement 22-1/2" Left Rear Leg # LC342610 The correct replacement bracket is the Replacement I-Beam Jack Bracket for Lippert Ground Control 3.0 # LC349975. Based on the experience of other customers, it may require...
view full answer... - Lippert Ground Control 3.0 - Rear Jack Leg Replacement RecommendationsI spoke to my contacts at Lippert and the shafts of the jack legs are not available separately. You would have to replace the jack legs. They also have not heard of the shafts breaking either. If you need a replacement left rear leg you would need # LC305339. For a right rear leg you would need the part # LC344792.
view full answer... - Error on Display After Jack Removed from Lippert Ground Control Leveling SystemThe issue you are having with the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part # LC675817 is an easy fix and you can do it yourself without taking the trailer in anywhere. The system needs rehomed which can be done by following the steps below. 1. Introduce an error - disconnect one of the hall effect sensor wires at the controller. 2. Attempt to operate the jack that is associated with the sensor wire that was disconnected. The touch pad screen will display an...
view full answer... - Leveling System Compatible with 42 Foot 5th Wheel TrailerThe Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w/ Touchpad and Remote - 20,000 lbs # LC358590 is designed for trailers where the measurement from the front landing gear to the rear is 20 feet or less. If longer, then the manufacturer recommends the 6 point system # LC675817 which adds two middle legs. They always navigate to the safe side, because they rate the 4 point system as 20k capacity based on each individual jack rated for 5K capacity. We do not carry the...
view full answer...
- Replacement Jacks For Lippert Ground Control 3.0 Six Point RV Leveling SystemOn the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC675817 the following jacks are used. Front Landing Gear # LC305340 Left Middle Jack # LC305339 Right Middle Jack # LC344792 Left Rear Jack # LC342610 Right Rear Jack # LC428493
view full answer... - Replacement Legs for Lippert Ground Control 3.0 on 2017 Eclipse Attitude 5th WheelWhat you have on your 2017 Eclipse Attitude 5th wheel is the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC675817. The correct middle replacement legs are the # LC344792 for the right side and the # LC305339 for the left side. If you end up needing to replace the rear legs as well then you need the # LC428493 for the right side and the # LC342610 for the left side.
view full answer...
- Lippert Ground Control 3.0 Out Of Stroke Error The "out of stroke" message on your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System, # LC358590 means the jack has reached maximum stroke length and can't extend any further to level the trailer. You need to block the legs, I prefer the Ultra-Fab Leveling Blocks for Trailers and RVs, # UF48-979051. If you continue to get an "out of stroke" error or you cannot manually retract the jack then that would point to signs of damaged internals which means the jack leg would need...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Michael H
Expert Research:
Jameson C
Video Edited:
Chris R
Updated by:
Shelly K
Updated by:
Mike S
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Elda
11/24/2022
Great and still easy to self level our trailer