Replacement 24-1/2" Right Rear Leg - Lippert Ground Control 3.0 Electric Leveling System
(65 reviews)
Price: $548.90
In Stock
Replacement 24-1/2" Right Rear Leg - Lippert Ground Control 3.0 Electric Leveling System
Item # LC344792
Retail:$741.86
Our Price: $548.90
You Save: $192.96
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (65)
- Q & A (0)
- Videos (2)
- Photos
Lippert Accessories and Parts - LC344792
- Camper Jacks
- Trailer Jack
- Legs
- Follow Leg
- Lippert
Replace 1 rear right leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad (LC225598) is sold separately.
Features:
- Replacement right rear leg for your Lippert Ground Control 3.0 electric leveling system (LC358590 or LC675817)
- Mounting bracket is included for installation
- Snapper pin to attach footpad (LC225598) is sold separately
Specs:
- Total lift: 12-1/2"
- Overall height:
- Retracted: 24-1/2"
- Extended: 36-3/4"
- Capacity: 5,000 lbs
344792 Replacement Right Follow Leg for Lippert Components Ground Control 3.0 Electronic Leveling System - Qty 1
Video of Replacement 24-1/2" Right Rear Leg - Lippert Ground Control 3.0 Electric Leveling System
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Lippert Ground Control Replacement Leg Review
Today we're going to be taking a look at Lippert's replacement rear leg for the ground control three leveling system. These are available for either the left or the right for either your four point or six point leveling system. These jacks are going to be a direct replacement for your factory originals. So whether your jacks are worn out and no longer functioning from age, or if you had some sort of collision that's damaged them, these are a nice easy replacement. And you don't have to replace your entire system, just that particular damaged jack.The replacement jack only includes the jack, so you want to make sure that you save all of your mounting hardware to get your new one installed. On the six point replacement jack, the foot pad is made onto the jack.
However on the four point system replacement jack, the foot pad is removable, and the pin that holds it on does not come included. So you want to make sure that you maintained your pin from your original jack. If need be, you can purchase additional replacement pins here at etrailer.com.With these replacement jacks, you can have the comfort of knowing that they are factory original replacements, and they're going to bolt right up guaranteed. Our motor's burnt out on this one here, so we're going to need to replace it. We'll begin the replacement by disconnecting the electrical connectors.
So you're going to want to follow the leads from the motor, pull those down. You'll disconnect them by pressing on the release tab, and pulling them apart.Next you'll simply need to remove all the bolts that are holding it in place. On our particular unit here, we're going to be using a 19 millimeter socket and wrench to remove those. To get to the top ones, I recommend only removing them partially, leaving some of the nuts still threaded on to hold it in place because it is quite heavy.Now we've got them most of the way removed, you can support your jack and remove the rest of the hardware by hand. I like to just leave the bolts in there and just remove those with the jack.
We'll now set it down and get our replacement. An exact replacement for the factory originals, and it installs just in the reverse order of how we removed it. Now when you removed your old one, you want to remember which holes that you used because it does have a height adjustment with these holes. If you're questioning it, you can always take a peak at the other side because the other side is going to have the same distance as this side.With all of our bolts in place, we can tighten them back down using that 19 millimeter socket and wrench. Then torque it to the manufacturer's specifications.
Now we can plug in our electrical connectors. And you're all set, ready to go on your adventures again. And that completes our look at Lippert's replacement rear leg for the ground control three leveling system.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
- Did not arrive in time
Customer Reviews
Replacement 24-1/2" Right Rear Leg - Lippert Ground Control 3.0 Electric Leveling System - LC344792
Average Customer Rating: 4.8 out of 5 stars (65 Customer Reviews)
Replace 1 rear right leg for your Lippert Ground Control 3.0 automatic leveling system (LC358590 or LC675817). Leg includes the mounting bracket needed for installation. Snapper pin to attach footpad (LC225598) is sold separately.by: Tim04/15/2024
This was an exact replacement for the one I severely bent by accident. Installation could not have been easier, should take about 15 minutes with the correct tools.
by: Laverne04/26/2024
Lippert crew in my book are dedicated people that has a great deal of knowing how to help the public
by: Gille08/18/2023
It is very easy to install and it's ready, once you plug it in, no adjustment or reset. I would mined paying the extra though to get get the 4 bolts washers and nuts for the installation, glad I had the ones from the damage jack.
by: Taylor 10/17/2023
Easy fit & replacement
by: Michael08/17/2019
The new one had the motor mounted on the opposite side. No big deal, mine had to be removed to get to the bolts anyway. Perfect replacement. I raised mine up a few inches. The factory mounted them on the lowest position. Hopefully wount catch a curb again!!
by: Kevin 06/29/2023
Perfect bolt on replacement. Total replacement time was about 15 minutes. Easy to order, quick shipping.
by: Ray 10/27/2022
I bought my 5th wheel hitch 4 years ago from etrailer and was completely satisfied with the hitch and advice I received. So ordering my leveling jack from etrailer wa a no Brainerd. Good price, fast shipping (for free) and great packaging. I installed it today and it works great.
by: Anthony 09/23/2022
The jack seemed to be a direct replacement. Electrical connections easy snap off and on. However, getting the nuts off was not easy. There are some access issues and mine were really on tight from the factory. I was having tires balanced by a local suspension shop. I had them change the cylinder. With breaker bars they had the nuts off quickly and the jack changes quickly as well. My system recognized that the jack was no longer broken and it worked fine.
by: John07/05/2022
Arrived really quick. Packaging to protect it was spot on. Bolted right on to the trailer, hooked up the electrical and it worked perfectly. No system reset, it just worked. The only thing i find odd is that a snapoer pin doesnt come with it. You get the leveler and the foot plate but no pin. Old pin was bent so had to buy a separate pin. Pleased oveerall. etrailer has thee best communication and they do take care of you. Thanks to all at etrailer!!
by: Brian W10/04/2022
This stabilizing jack is an exact replacement for my forest river 5th wheel. It was shipped and delivered quickly. Installation was very easy taking about 10 minutes. My leveling system recognized the new part, I reset the error code and it just worked. Etrailer is a pleasant shopping experience, thanks!
by: Gary M06/05/2019
Received my Lippert electric RR Jack in 4 days with free shipping. I have installed the jack, in about an hour. This was not etrailers fault, but the electrical connections were very, very suborn to get appart, and the 6 bolts had to use a breaker bar to get off. Took only about 10 minutes to reinstall the new jack. I will not be able to test the installation until I can get the trailer on level ground.
by: Don N.08/01/2016
The jack came well packed and with no damage. It was easy to install. George at etrailer kept me informed on the status of my order beginning with receiving my order to when it was shipped, and finally after it was delivered.
Don N.
12/28/2017
The replaced right-rear leveling jack is working great. After installing it,I had to view a Youtube video to get the central controller to recognize it.It would be helpful if Lippert replacement parts included instructions thatare necessary to make the part function properly as if it was installed atthe factory.Thanks for your email and the ability to provide feedback.
by: Lawrence 08/11/2023
everything good
by: Bill01/30/2018
Quick shipping from etrailer. Product was used to replace a damaged leveler due to driver error. Would be helpful if the snapper pin was part of the leveling system
by: Deanna01/27/2019
The part does not fit properly and is not compatible with the leveling system on our camping trailer.
Mike L.
1/28/2019
This item is meant as a replacement right rear leg for a Lippert Ground Control 3.0 electric leveling system, part # LC358590 or # LC675817. It will not be compatible with other systems.
by: Kevin06/01/2018
I was very pleased with the timely manner and the quality of people who I delt with at etrailer. The items I ordered were delivered on time and everything was as it should be. I installed the parts on my camper and now I'm back in business. Thanks
by: Tom11/05/2019
Extremely Proud of how fast etrailer is... Damaged this on Friday, ordered LATE Friday and showed up on Tuesday already. Complete replacement of the one I damaged on 5th wheel.
by: Eric04/07/2018
Easy bolt on replacement for broken jack. Total install time including resetting system less than 20 minutes.
by: Don Finley12/07/2016
Driver mistake. Bent my middle jack on passenger side of fifth wheel. Talked to John and he rush shipped item to me in time for Disneyworld trip with family. Installed and go to go.
by: Angel L07/25/2016
I received this product within a reasonable time and was able to install it within 20 minutes and everything worked perfectly thank you very much
by: William11/29/2018
Got part on time. Installed myself. It matches the OEM jack. Install and torque bolts, plug in. Works with the system as expected. No issues.
by: John10/28/2019
Everything ok .the rite part ,the Jack fit well ,the computer excepted the Jack no problems so . Excellent delivery time line thank you. Great people on the service department.
[Thumbs up]
by: Jerry07/28/2018
Fast shipping, product exactly what I needed. I will do business again with etrailer.com
by: Helen 12/22/2022
Excellent service quick delivery. Cannot ask for any more.
by: Tom02/06/2019
I made the mistake of bending one of my stablizers at a service station. I call Tim and he fixed me up with this great product and excellant service. I would recommend this product and company to everyone.
25
65
Show More Reviews
See what our Experts say about this Lippert Accessories and Parts
- Can Replacement Rear Legs for Lippert Ground Control be Used with Other BrandsThe Lippert legs that you mentioned, # LC305339 and # LC344792, are designed specifically for use with the Lippert 3.0 Ground Control system # LC358590. This system has unique electrical components that are not interchangeable with other brands so the legs alone will not work with your existing system. You would need to either replace the whole system with the Ground Control or use manual stabilizers at the back of your trailer. The highest capacity manual stabilizer jacks we have are...
view full answer... - Replacement Rear Leg Recommendation for Lippert Ground Control Landing Gear JackWe have replacement rear legs for the Lippert Ground control system that it looks like you have. For the rear left leg you'd need the part # LC305339 and then for the rear right leg you'd want the # LC344792. As of right now (April 2018) July 2018 hasn't happened so I'm pretty sure you meant 2017. The Ground Control like part # LC358590 has a 1 year warranty.
view full answer... - Stand-Alone Powered RV Stabilizer for Front or Rear InstallationThe Lippert Ground Control jacks use Hall Effect motors that are meant to be used as part of that complete automatic leveling system but we do have powered jacks and powered stabilizers that can give you similar powered leveling. For instance Lippert makes their High-Speed Power Stabilizer Jack # LC369774. This kit includes a switching kit and gives you independent control of both legs. It also works well on uneven surfaces. Lift is as much as 30-inches and this unit can be used in front...
view full answer... - Replacement Jacks For Lippert Ground Control 3.0 Six Point RV Leveling SystemOn the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC675817 the following jacks are used. Front Landing Gear # LC305340 Left Middle Jack # LC305339 Right Middle Jack # LC344792 Left Rear Jack # LC342610 Right Rear Jack # LC428493
view full answer... - Lippert Ground Control 3.0 Out Of Stroke Error The "out of stroke" message on your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System, # LC358590 means the jack has reached maximum stroke length and can't extend any further to level the trailer. You need to block the legs, I prefer the Ultra-Fab Leveling Blocks for Trailers and RVs, # UF48-979051. If you continue to get an "out of stroke" error or you cannot manually retract the jack then that would point to signs of damaged internals which means the jack leg would need...
view full answer... - Lippert Ground Control 3.0 - Rear Jack Leg Replacement RecommendationsI spoke to my contacts at Lippert and the shafts of the jack legs are not available separately. You would have to replace the jack legs. They also have not heard of the shafts breaking either. If you need a replacement left rear leg you would need # LC305339. For a right rear leg you would need the part # LC344792.
view full answer... - Availability of Replacement Screw for Lippert Ground Control 3.0 Rear LegsI spoke with my contact at Lippert who said that there are no replacement parts for the rear jacks of the Ground Control 3.0 Electric Leveling System # LC358590. You will need to replace the whole leg which might not be a bad idea anyways since you said they installed incorrectly and keep getting damaged. We offer both Left # LC305339 and Right # LC344792 side rear legs for you to choose from.
view full answer... - Replacement Left Rear Leg for Lippert 3.0 Ground Control Leveling SystemTo replace the left rear leg on your Lippert 3.0 Ground Control Leveling System # LC675817, you will just need the Replacement Left Rear Leg # LC305339. This leg will include the motor and mounting bracket needed for installation . The replacement leg is not available from the manufacturer without the motor so you will need to replace the entire leg assembly. The pricing information will be listed on the product page.
view full answer... - Replacement Rear Jack/Leg Recommendation for Lippert Ground Control Leveling SystemIf you are looking for replacement rear jacks for use with the Lippert Ground Control leveling system you'd want the part # LC344792 for the right rear leg and part # LC305339 for the rear left leg.
view full answer... - Replacement Left and Right Middle Legs For Lippert Ground Control 3.0 On 2018 Keystone MontanaThe Replacement 24-1/2" Left Rear Leg # LC305339 and Right Rear Leg # LC344792 are the correct replacement middle jacks for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC675817. These also act as the rear replacement legs of the 4 Point Kit # LC358590 which is why they are labeled the way that they are. Your Rear Legs # LC428493 and # LC342610 are 2" shorter than the middle legs.
view full answer... - Replacement Right Rear Jack For Lippert 6 Point Ground Control 3.0 on your 2017 Jayco Northpoint Thank you for the serial number Matt, I can tell you have the Lippert Ground Control 3.0 leveling system so you will need either the Jack # LC428493 if you currently have jacks with welded on foot plates or the Jack # LC344792 if you have detachable foot plates on your current jack. Lippert was not able to tell me which style you had off the serial number.
view full answer... - Expanding 4-Point Lippert Ground Control 3.0 Leveling System to 6-Point SystemThe control pad of your 4-point system # LC358590 will still work just fine according to my tech contact at Lippert to expand to the 6-point system. You will not need a complete system replacement, but you will need the Replacement Control Module for Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC346005, the wiring harnesses # LC347013 and # LC347012 to go from the controller to the new middle legs, and then of course the middle legs. For those middle legs you will...
view full answer... - Replacement Legs For 4-Point Lippert Components Ground Control 3.0 Electric Leveling SystemI do have an option for you but the inner jack leg is not replaceable therefore if these were bent then you will have no other option but to replace the entire jack leg. I have attached for you below the correct replacement jack legs for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part # LC358590. Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System part # LC305340 Replacement Right Rear Leg for Lippert Components Ground Control...
view full answer... - Lippert Ground Control 3.0 System Rear Jack Replacement Amperage DrawThe replacement leg # LC344792 for the Lippert Ground Control part # LC358590 draws up to 35 amps max.
view full answer... - Out of Stroke Error on Lippert Ground ControlI am a bit confused by your question as Kwikee does not make trailer jacks but rather trailer steps. If you were instead referring to trailer jacks such as the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part # LC358590 then the "out of stroke" error means you have extended the jack too far. If the jack will not retract using the touchpad then you will need to do so manually with the manual override on top or bottom (see photo). If you continue to get an "out of stroke"...
view full answer...
- Correct Replacement Rear Jacks for Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling SystemWe do offer the replacement rear jacks for the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System part # LC358590. I have attached for you below a list of options based on length and position. Replacement 22-1/2" Left Rear Leg part # LC342610 Replacement 22-1/2" Right Rear Leg part # LC428493 Replacement 24-1/2" Right Rear Leg part # LC344792 Replacement 24-1/2" Left Rear Leg part # LC305339
view full answer... - Troubleshooting Squeaking and Out of Stroke Errors on Lippert Ground Control The noises you described in your question along with the "Out of Stroke" error message you're getting might be indicating some internal damage with the gears on the jack leg(s). The "Out of Stroke" error basically means that the jack has extended as far as it can go, so if you're getting the message after only 4 inches of extension then there's something preventing it from going further such as a bent pin or stripped gear, which would require that the leg get replaced. The only lubrication-type...
view full answer... - Troubleshooting Lippert Ground Control Rear Jacks that Wont Retract and Light FlashingSounds like it could be a bad control module. For the 6 point system you have # LC675817 you'd need the # LC346005 but let's first troubleshoot to determine this. The first thing you are going to want to do is check for blown fuses on the control board. If the fuses are good to go then you will want to make sure there is not a binding issue within the jack leg. To do this you will want to use the manual override feature on the top or bottom and make sure there is no resistance when turning...
view full answer...
- Replacement Leg for Lippert Ground Control 3.0 on Keystone Cougar Travel TrailerThanks so much for the photo, it was very helpful. Based on that the correct replacement leg for the Lippert Ground Control 3.0 Electric Leveling System # LC358590 on your Keystone Cougar is actually going to be the Replacement Left Rear Leg # LC305339, which as you can see with the side-by-side photo, is oriented the same as your damaged leg (the entire replacement leg with motor does need to be purcahsed, as there is not a separate leg portion without the motor available). The Replacement...
view full answer...
- Replacement Stabilizer Jack for 2015 Dutchmen Voltage Epic V3005 Toy HaulerI reviewed online specs for your Dutchmen Voltage V3005 5th wheel toy hauler and these show it will have a powered front stabilizer in addition to its front landing gear jacks. Examples of front electric stabilizers are # UF39-941705 (with 30-inch lift) or # UF39-941707 (with 22-inch lift). An example of electric landing gear is # UF17-943010. If the trailer has a multi-jack leveling system like the Ground Control 3.0 # LC358590 we do offer replacements for specific legs, such as the Right...
view full answer... - Will Ground Control 6 Point Rear Jacks Work for Travel Trailer Ground Control System?The Ground Control jacks for travel trailers are different as they are a C-jack instead of a vertical lift. I recommend using the Replacement C-Jack for Lippert Components Electric Ground Control TT # LC404488 for that application instead of combining because the system is different using a completely different controller as well. The Replacement Right Rear Leg for Lippert Ground Control 3.0 Electric 6 Point Leveling System # LC428493 and the Replacement Left Rear Leg for Lippert Ground...
view full answer...
- Replacement Right Center Leg Recommendation for 6 Point Lippert Ground Control SystemI spoke with my contact at Lippert and he stated that the correct replacement right middle leg for your 6-Point system is the Lippert # LC344792. The rear legs for the 4-Point system are the same as the middle legs for your 6-Point system. I wish there was a way to order the leg without the motor but that's not available currently.
view full answer... - Replacement Brackets And Legs For A Lippert Ground Control 3.0 Leveling System If the portion of your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC358590 that is bent is the bracket that attaches to the I-Beam you can replace it with the Replacement I-Beam Jack Bracket for Lippert Ground Control 3.0 # LC349975. If the bracket on the leg is damaged then you'll have to replace the entire leg. For the left rear leg you'll need # LC305339 and for the right rear leg you'll need # LC344792. The front legs of the Ground Control 3.0 can be replaced...
view full answer... - Replacement Rear Leg Replacement for Lippert Ground Control 6.0 of 2019 Open Range 374BHSSince your 2019 Open Range 374BHS has the Lippert 6 point Ground Control system and the foot plate is pinned in place the part # LC344792 that you referenced is the correct leg. The part # LC428493 is for if the foot is welded to the jack leg.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video by:
Kathleen M
Video Edited:
Chris R
Updated by:
Shelly K
Updated by:
Mike S
Written by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Katrina B.
7/8/2022
We do carry the snapper pins separately, part # LC225598.