Replacement Jacks For Lippert Ground Control 3.0 Six Point RV Leveling System

Question

Question:

I have a 22 Grand Design Solitude s-class 3740bh 5th wheel which I believe has the lippert ground control 3.0 leveling system. Ive damaged one of the middle legs and wondering if you sell just the single part vs the entire system. Thanks!

asked by: Jon

1

Helpful Expert Reply:

On the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System # LC675817 the following jacks are used.

Front Landing Gear # LC305340
Left Middle Jack # LC305339
Right Middle Jack # LC344792
Left Rear Jack # LC342610
Right Rear Jack # LC428493

expert reply by: Bud M

1

Answer 1

The "Out of Stroke" error on the Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System - 4-Point Set #LC358590 and 6-Point Set #LC675817 means that they have reached the max height, can no longer lift so you need to…

view full answer...

Answer 2

The Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System #LC675817 is a universal fitment and will fit most all 5th wheel campers that have a GVWR under 15,500lbs. For your 2020 Genesis Supreme 5th Wheel I am almost certain that you will…

view full answer...

Answer 3

The orientation of left and right is most easily explained like you are in a drivers seat. So when seated in a drivers seat your left side is left and your right side is right. So the Replacement Short Left Rear Leg #LC342610 would be for the drivers…

view full answer...

Answer 4

If both middle jacks are not retracting or extending on your #LC675817, odds are one or more of the fuses is out. There is a fuse for each of the legs and if one of these is bad, it will definitely cause the legs not to work. This can be mounted just…

view full answer...

Answer 5

Normally an intermittent working motorized jack like the Lippert Components Powered Tongue Jack #LC285318 is due to a faulty ground or a short circuit in the power wire. I recommend checking your ground connections, normally in the mount of the jack…

view full answer...

Answer 6

The left front jack error code ("LF) you are getting on your Lippert Ground Control System like #LC675817 can be triggered by a few different things. The first, which it seems you may have already ruled out, is that the system is for whatever…

view full answer...

Answer 7

The reason you're having this issue is because the middle jacks on the Lippert Ground Control 3.0 (6 point set) #LC675817 aren't designed to be run independently and will only come down after auto-leveling has been completed. There is not a…

view full answer...

Answer 8

Yes, you can add two stabilizer jacks to the long tail portion of your Sabra to help stabilize it along with your Lippert Ground Control part #LC675817. I recommend the pair of 2 Ultra-Fab Scissor Jacks part #UF48-979031 to add to the rear of the…

view full answer...

Answer 9

There are a few reasons why you may be getting the "feature disabled" code with your Lippert Ground Control 3.0 #LC358590. If you were trying to initiate hitch recognition, the front of your coach may have been below level; you would need…

view full answer...

Answer 10

The " ***Error*** Feature Disabled " code on your Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling System w Touchpad and Remote #LC675817 can be caused by the following things: 1. Front of coach is below level when starting Auto…

view full answer...

Answer 11

I went ahead and pulled this Replacement I-Beam Jack Bracket #LC349975 from our warehouse to measure. I have attached the dimensions below. Hope this Helps.

view full answer...

Answer 12

Really you're going to need to measure the distance where the leveling system is going to be installed. If that distance is more than 20', then you're going to want the 6 point Lippert Ground Control 3.0 Electric 5th Wheel RV Leveling…

view full answer...