Replacement Lippert Ground Control 3.0 Left Middle Jack Leg

Question:

Hello, I need a replacement for the Left middle Leg only for a Lippert Ground Control 3.0 Electric 6 Point Leveling System. The motor, which I see you sell separately, is fine and does not need replacement. I only need the -down screw-down leg. On your website, I see parts LC342610 and the LC305339 which include the electric motor. I need only the leg jack part. Is this sold separately? Also, I cant tell the difference from the website between these two above jacks? Mine has 22 bolt holes 11 on each side and the main shaft is about 19 inch long, see middle part on attached picture so which one do I need? Thanks,

asked by: Eric S

Expert Reply:

Lippert does sell the motor separately but unfortunately not the leg unit. If you are needing the leg unit then you will need to purchase the entire rear jack.

Thank you for the picture and your description. Between the Replacement # LC305339 and # LC342610 jacks you need the part # LC305339. I went out to the warehouse and verified that the outer leg measures 19" just like your part. The other jack is 2" shorter than this jack so it wouldn't work properly.

expert reply by: Jon G