Lippert 5th Wheel RV Landing Gear Foot Pad - 9" Round
(52 reviews)
Price: $108.34
In Stock
Lippert 5th Wheel RV Landing Gear Foot Pad - 9" Round
Item # LC314667
Retail:$156.95
Our Price: $108.34
You Save: $48.61
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (52)
- Q & A (0)
- Videos (2)
- Photos
Lippert Accessories and Parts - LC314667
- Camper Jacks
- Trailer Jack
- Jack Foot
- Lippert
- This 9-inch diameter landing gear foot pad replaces the standard rectangular pad that comes standard with most power landing gear systems. Increase your footprint and stability with a pair of these foot pads.
- Large, 9-inch diameter foot pad is an upgrade to standard landing gear foot pads.
- Round, 9-inch diameter foot pad adds to front landing gear/front jacks footprint.
- 9" diameter
- 2 foot pads per package
- Easy do-it-yourself installation
- Made in the USA
- 90-Day warranty
314667
Video of Lippert 5th Wheel RV Landing Gear Foot Pad - 9" Round
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Lippert Components 5th Wheel RV Landing Gear Foot Pad Review
AJ: What's up, everybody It's AJ, with etrailer.com. Today, we're going to be checking out this Lippert fifth wheel landing pad replacement part. You can see there's one here on our landing gear already; I'm going to pop this one off there and show you how easy it is to install this one. Now, there's nothing wrong with the current landing pad, but I just wanted to show you how easy it is to install it. So we're just going to pop out this pin, it pulls off that, and then we'll take our new one. You can see it's a little bit different; it's got this in the center.
That's what the bolt is going to run through. You can just push this up there, line up the holes there, and re-insert our pin. Now you've got it installed.It comes in a quantity of two, so this is the other one that we don't have installed, so we can see them side by side. They're the exact same, as you can imagine. It's actually got a 9" diameter, so that's how big of a footprint it's going to have when it's sitting down on the ground.
That mesh is the one we took off there, but maybe yours is a little bit smaller and you want more of a footprint. This is going to help you do that. This is just going to give you more grip on the ground; that way, if it's soft, muddy ground, or sand, or gravel, something that shifts around, the bigger footprint is going to help you not have any sinkage with your rig when you put the landing gear down.Another thing to think about is, when you're bringing your landing gear down and the metal, the concrete, contact. You don't want to damage the concrete; you also don't want it to slip or cause any issues. I would recommend getting one of the jack pads that we have from inaudible 00:01:43.
This is rubber; it's got a 1" diameter here that's going to protect the concrete, and your rig, when you're bringing in and lowering down the landing gear. That way it doesn't have uneven concrete or anything like that. It's not going to damage or push down on there, and the metal is not going to slip or anything. It's going to be nice and gripped with this rubber pad.Another thing I want to point out, the new landing pad versus the old one, is there's actually holes in the new one, and that's going to help water if it pools up in there; it just doesn't sit here and slowly erode away, it actually can drain back down there and not cause any issues.That does it for our look at the 9" landing pads from Lippert. I hope this helped..
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Lippert 5th Wheel RV Landing Gear Foot Pad - 9" Round - LC314667
Average Customer Rating: 4.9 out of 5 stars (52 Customer Reviews)
by: RoamingGypsies09/01/2022
So nice not to fuss with placing boards under the feet when parking.
One time easy install, looks great and provides excellent stabillity
by: Brian02/16/2024
This was a nice addition to my 5th wheel. I added the rubber pads. Now very stable when parked.
by: Brent 08/21/2023
Bent a foot pad on landing gear and this was an exact replacement. One bolt up the bottom and it’s replaced.
by: Larry 03/28/2024
Everything as advertised no issues
by: Bill Z11/28/2022
Our trailer came with these 9" round pads. One night we noticed one was gone. The pin either failed or someone unclipped it and stole it.
This is a perfect replacement for the feet on the Northwood Artic Fox AF27-5L self leveling system.
Actually I think this is an improvement over the OEM feet as the mounting hole for these feet fit a 3/8" bolt nicely.
I've replaced all the pins with bolts and nylon lock nuts. People can still steal them but it's gonna be a lot tougher.
Good product, fast delivery.
by: Mark B10/16/2017
The Lippert foot pads were a great addition to my 5th wheel. The factory feet were bending and starting to sink into the ground because of the reduced surface area. Instead of having to carry extra boards around I replaced them with these foot pads. Work great, larger surface area, and well made.
by: Judy06/27/2019
Having first looked at the landing pads and thinking that they were right - wrong - mistake. Calling etrailer got me to the right person to look up what I should have ordered. Having agreement from my looking and customer service, found the right product. Delivered in timely fashion (altho had to pay for faster delivery) put the part on my fifth wheel today and fit right on. Best when ordering check dimensions of what you need carefully. Sometimes what is written as description is not the same as what you need. Check before ordering. Any questions - etrailer customer service was more than helpful and fantastic to work with. Give etrailer a try!
by: Joe D12/28/2019
Part fit perfectly and performed per expectations. Slide is still working good and we have no complaints.
Also purchased new landing gear pads. Very easy installation.
by: Jason05/24/2015
These feet are GREAT! They did not fit our Atwood Landing gear but they are fantastic! Wish they did. Good weight, and very stable.
by: Dale 05/24/2020
Landing gear foot pads fit outstanding and installed as expected with ease.
by: Lane 06/26/2021
These were great replacement foot pads for my corroded factory pads. Great description on the website helped me choose exactly what I needed.
by: Gerald 04/13/2021
Selection of parts and service on line was excellent. One big negative was the wait time on the phone - tried to call 3 times and finally hung up each time after long wait time on hold.
by: Roger07/20/2018
My 2 local RV shops just about laughed. “Good luck finding THAT part”. etrailer not only had it they shipped it so fast!!! Ill be saving money in the future by not wasting gas driving to my local shop. etrailer has everything I need
by: Craig 12/08/2021
I have been looking for these for months. Finally found out about etrailer and with Nicoles help they arrived today. Will be adding etrailer to my email list for other trailer parts as I need them.
by: Paul Henry02/18/2017
Lippert products and service - always excellent! Same with etrailer.
by: Paul08/06/2020
They look used/scratched on the bottom and top and need to be repainted which I will do. Other than that, they look good
by: Robert s.08/16/2018
Even with a possible back order I received my parts quickly and all great ?? Definitely do business with them again. Thanks Bob
by: Vicki H.07/13/2017
My husband replaced the foot pad in about 10 minutes. Product looked just like original prior to a tight turn mishap :-) Quality product. Easy to use website. Fast shipping. Will visit for future needs.
by: Richard 10/07/2021
The foot pads are large and easy to install. But $110 for two pieces of steel is over priced.
by: Herbert G09/01/2017
Out of stock when ordered but kept in contact with me and was notifde as soon as item was shipped, easy to install and heavy duty and looks great
Herbert G.
9/1/2018
Working great no problems
by: Ed03/31/2021
Product was exactly pictured and described; exactly what I needed. Item was promptly shipped and arrived in great condition.
Ed S.
4/1/2022
Great, no problems!
by: Justin07/19/2018
Great product fit perfect will be doing more business with etrailer
by: Jack 09/30/2022
Prompt delivery, excellent service, product was exactly what was needed
by: Mike 07/27/2021
This product is exactly as expected and what I was looking for. A great upgrade to the lackluster OEM.
by: Kevin 01/16/2021
Exactly as described and fit perfectly. Great customer service - alerted me that a similar item I was going to purchase was on back order and let me swap it out with this one instead - I never would have know and I've already received and installed before the back ordered item would have even shipped. Super fast shipping!
25
52
Show More Reviews
See what our Experts say about this Lippert Accessories and Parts
- Correct Replacement Foot Pads For A 2020 Genesis Supreme 32CRXLThe Lippert 5th Wheel RV Landing Gear Foot Pad # LC314667 is the correct replacement for your 2020 Genesis Supreme 32CRXL, and is the intended replacement for the Lippert Ground Control 2.0 Leveling System.
view full answer... - Recommended Landing Gear Foot Plate for 9 Inch Round Upgrade on 2016 Flagstaff Super Lite 5th WheelThe Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round # LC314667 is compatible with your landing gear leg. The Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System # LC362486 will work for your system if the outer diameter is 2 inches by 2 inches at the foot and the pin diameter is 3/8 inch which is typical. I've attached a video to assist.
view full answer...
- Will Lippert Components 5th Wheel Foot Pad Fit 2020 Genesis Supreme Vortex Model 3317Yes the Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round # LC314667 does fit the landing gear you have on your 2020 Genesis Supreme Vortex model 3317.
view full answer... - Solution for Replacement Foot Plate for Lippert Level Up SystemThe exact replacement foot plate for the Level Up system you have is not available as a replacement. But you could use # LC314667. The issue is that it uses a smaller bolt than the Level Up foot. So you would have to use a 1/2 inch bolt that will thread onto the bottom of the jack leg in place of the 7/16 bolt that comes with # LC314667. Since this uses a horizontal attachment hole you would not have to worry about the feet turning. You need to torque to 132 ft-lb.
view full answer...
- Will the Lippert Components Landing Gear Foot Pad Fit the Ultra-Fab Landing Gear SetI went out to our warehouse and test fit the Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC314667 to the Ultra-Fab Deluxe Electric Landing Gear Set part # UF17-943010. The pin that is used to secure the foot pad to the leg will fit but the location of the pin hole on the foot pad does not align with the location of the pin hole on the leg. Therefore, they will not work with one another out of the box. However, if you were to use a slightly longer bolt to attach the pin...
view full answer... - Will Lippert 5th Wheel Landing Gear Foot Pad # LC314667 Fit 2012 Keystone Cougar 324RLBBased on my research your 2012 Keystone Cougar 324RLB 5th Wheel Trailer should be equipped with a Lippert Landing Gear system. If this is the case the Landing Gear Foot Pad # LC314667 that you referenced will work perfectly. These will replace the existing rectangular feet with 9 inch diameter pads to provide better stability.
view full answer... - Will Lippert Components 5th Wheel RV Landing Gear Foot Pad # LC314667 Fit a 2008 Keystone MontanaYour 2008 Keystone Montana Mountaineer should have Lippert landing gear on it. If that is the case then the foot pad # LC314667 will fit for sure. Even if it isn't Lippert landing gear the foot pad will still fit most other brands of electric landing gear so I do not foresee any issues!
view full answer... - Will Jack Foot Pad # LC314667 Fit 2018 keystone Impact 361 Yes, the Jack Foot Pad, # LC314667, will work on your Keystone Impact as this product will fit Lippert landing gear like what would be on your RV.
view full answer... - How Many Foot Pads Are Included with Lippert 5th Wheel Landing Gear Pad # LC314667The Lippert 5th Wheel RV Landing Gear Foot Pad # LC314667 referenced in your question includes 2 foot pads. The listed price on the product page is for both pads together.
view full answer... - Will Replacement Foot Pad for Lippert Landing Gear Fit a 2008 Carriage Carri-LiteIf your trailer uses Lippert electric landing gear and has a hole in the bottom of the inner leg that normally holds on a foot then yes, foot pad # LC314667 will fit. If you have a different brand of landing gear let me know what it is and I can see if we have an exact replacement.
view full answer... - Replacement Foot Pads for Lippert Ground Control 3.0The replacement foot pads for the Lippert Ground Control 3.0 # LC675817 (6-Point Set) or # LC358590 (4-Point Set) are different; the Replacement Rear Foot Pad # LC377962 has a circular receiver tube and the Replacement Front Foot Pad # LC362486 has a square receiver tube. Since you have the 6-point system and said you lost the left middle I believe you need the Front Foot Pad # LC362486.
view full answer... - Will Lippert Landing Gear Foot Pad # LC314667 Fit Keystone Montana Fifth WheelYes, Keystone Montana fifth wheel trailers use Lippert landing gear sets like what the Lippert Components 5th Wheel RV Landing Gear Foot Pad # LC314667 you referenced is designed to fit.
view full answer... - Best Option for Foot Pad for Lippert Level Up Lippert does not make the specific foot pad for the Level Up system a replacement part, so the best option for a replacement is the Lippert Components 5th Wheel RV Landing Gear Foot Pad # LC314667. Please keep in mind this may require you to source a different size bolt in order to fit the Level Up.
view full answer... - Are Round Replacement Foot Pads for Power Landing Gear an UpgradeThe Lippert Components 5th Wheel RV Landing Gear Foot Pad # LC314667 are absolutely an upgrade over standard foot pads for power landing gear systems. The reason for that is 2-fold: 1) they are large at 9 inches in diameter which means they are much wider than what you have, helping to distribute weight and 2) they are round, which means they are going to be more stable than a standard rectangular foot because they more evenly distribute the weight.
view full answer...
- What is Difference Between Landing Gear Feet From Lippert # LC362486 and # LC314667I wouldn't say # LC362486 fits a common landing gear leg as it was intended for the Lippert Ground Control leveling setups whereas the part # LC314667 was intended to fit the standard RV legs since it is different than the other kit. This attaches with a very standard horizontal pin type setup which most landing gear setups have.
view full answer... - Will Lippert RV Landing Gear Foot Pad # LC314667 Fit an Alpha See YA Class A RVLippert Components 5th Wheel RV Landing Gear Foot Pad # LC314667 takes a 7/16 inch bolt. In order for it to fit your jack leg the bolt size would need to be the same. You can also check for any part numbers on your jack system and I can check if there is an exact replacement for it.
view full answer... - Lippert Foot Pad Recommendation for Heartland Landmark with Lippert Level Up SystemReplacement foot pad # LC314667 isn't the exact replacement for your Level Up system. The one for the Level Up is not available as a replacement. But you could use # LC314667. The issue is that it uses a smaller bolt than the Level Up foot. So you would have to use a 1/2 inch bolt that will thread onto the bottom of the jack leg in place of the 7/16 bolt that comes with # LC314667.
view full answer...
- Recommended Foot Pad and SnapPads for 2004 Gulf Stream Conquest Ultra SupremeFor your jack pads, I recommend the Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round # LC314667. Then you can use the SnapPad Jack Pads for 5th Wheel Campers w/ 9" Round Jack Feet - Qty 4 # SP54FR4.
view full answer... - Recommended Replacement 5th Wheel RV Landing Gear Foot Pad Sorry for your troubles and I am sure we have something that will work but I do not have anyway of knowing what kind of replacement foot your 2019 Thor Challenger 37FH's landing gear needs. If you could look at one of the other feet and see if there is a part number on them or one for the entire system I would be happy to track down a replacement for you. The Lippert 5th Wheel RV Landing Gear Foot Pad - 9" Round item # LC314667 you were looking at is just one of many. While these may...
view full answer... - How to Give your Lippert Landing Gear a Larger FootprintI am not familiar with the Happijac Elephant Foot therefore would not be able to provide you with the pros and cons but the Lippert Components 5th Wheel RV Landing Gear Foot Pad part # LC314667 is a circular replacement foot pad for the standard rectangular foot pad that came with most powered Lippert landing gear systems. The 9" diameter foot pad will provide a much larger surface area than the standard foot pad which will increase stability and reduce sinking on soft porous surfaces....
view full answer... - Foot Pad Replacement for Lippert Ground Control 2.0 OptionsThe Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round # LC314667 is the original part for the Ground Control 2.0 system like you mentioned, but the Replacement Front Foot Pad for Lippert Components Ground Control 3.0 Leveling System # LC362486 will work if your square jacks will fit the 2 inch square measurement on this foot (see picture). I've attached a video with more info for you to check out as well.
view full answer...
- Will the Lippert Components 5th Wheel RV Landing Gear Foot Pad Fit a Heartland Fifth WheelYes, the Jack Foot Pad, # LC314667, will work on your 2010 Keystone Montana as this product will fit Lippert landing gear like what would be on your RV.
view full answer... - Replacement 5th Wheel Landing Gear Foot PadIt is likely that the Lippert 5th Wheel RV Landing Gear Foot Pad # LC314667 will work for your landing gear. They replace the standard rectangular pad that comes standard with most power landing gear systems. I have included a video that shows how easy the installation of this is. As long as your landing gear has the cotter pin style attachment these should work for you. If you have an alternative style and can find some markings like the manufacturer and model number or can send in some...
view full answer... - Lippert Round Foot Pad Installation on Standard Square Landing Gear LegThe Lippert Components 5th Wheel RV Landing Gear Foot Pad - 9" Round # LC314667 does go inside the square leg that holds the pad. I've attached a photo to assist. It will fit the standard landing gear tube dimensions like you have on your 2009 Jayco 5th Wheel Trailer.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Andrew K
Installed by:
Jeff D
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Jacob T
Written by:
Chelsea B
Updated by:
Mike S
Video by:
Aidan B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Roaminggypsies
9/4/2023
The pads are still working like champs! We have been in some tight spots, and have banged the leveling legs on some rocks over the last year. Although I bent one of the base plates, I was able to replace the plate and pop the pad back on. Excellent invrstment.