Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
(86 reviews)
Price: $411.77
In Stock
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
Item # K2R35D
Our Price: $411.77
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (86)
- Q & A (0)
- Photos
Kodiak Trailer Brakes - K2R35D
- Disc Brakes
- 3500 lbs Axle
- Rotor
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Marine Grade
- 5 on 4-1/2 Inch
- Kodiak
Trailer disc brake kit includes 2 assemblies with corrosion-resistant, Dacromet-plated rotors; calipers; and mounting brackets. Assemblies fit 3,500-lb axles and 14" and larger wheels. The 10" rotor features a 5 on 4-1/2 bolt pattern.
Features:
- Brake assemblies make it easy to change from an idler axle to a disc brake axle
- Disc brakes deliver better performance than drum brakes
- More consistent stopping, even at highway speeds
- Dramatically shorter stopping distance
- Maintenance costs are lower than for drum brakes
- Fewer moving parts to maintain, repair and replace
- Dacromet coating provides superior corrosion resistance for freshwater or saltwater use
- 300- to 400-Hour salt-spray rating
- Slip-on, cast iron, over-the-hub rotors
- Fit over standard idler hub and are held in place by wheel and wheel bolts
- Remove easily for maintenance
- No need to replace entire hub-and-rotor assembly if only hub or rotor becomes damaged
- Increase distance from hub face to hub face by 1/2"
- Prevent heat-related damage with vented design that effectively dissipates heat
- Cast iron calipers are self-adjusting for smooth, equal braking
- Cast iron construction does not flex like aluminum
- Low-drag design retracts piston farther than other calipers for a cooler-running brake
- Stainless steel piston is 2-1/4" in diameter - 30 percent larger than other brands
- More braking torque than the competition
- High-performance, ceramic brake pads
- Ductile iron mounting brackets provide strength and durability
- Side-support design ensures that load is placed on bracket, not bolts
- Extra embossing for additional thread contact ensures tight, secure mounting for caliper guide bolts
- 4-Bolt brake flange mounting configuration - weld-on flange sold separately
- Kit includes 2 full brake assemblies
- 2 Dacromet-plated, cast iron rotors
- 2 Dacromet-plated, cast iron calipers
- 2 Dacromet-plated, ductile iron caliper-mounting brackets
- 4 Stainless steel caliper-mounting bolts
- Hydraulic brake actuator and lines (sold separately) are required for brakes to be activated
- Requires psi rating of at least 1,500
Specs:
- Fits:
- Axle capacity: 3,500 lbs
- #84 Spindle
- Wheel size: 14" and larger
- Axle capacity: 3,500 lbs
- Bolt pattern: 5 on 4-1/2"
- Overall rotor diameter: 10-7/8"
- Brake flange configuration: 4 bolt
- 3-Year warranty
Disc Brakes
More and more people are switching their trailers over to disc brakes, and with good reason. Disc brakes deliver consistent braking - even at highway speeds - unlike drum brakes, which often show a substantial drop in braking torque at higher speeds. In addition, disc brakes offer a substantially shorter stopping distance than drum brakes.
Disc brake calipers have only one moving part, rather than the many found in drum brakes. This means that there are fewer parts to maintain, fewer parts to get damaged and fewer parts to have to repair or replace, thus reducing maintenance costs.
Over-the-Hub Rotor
Kodiak's slip-on, cast iron rotor makes it easy to convert an idler axle to a disc brake axle. Simply place the rotor over your hub. It is most often wheel bolt piloted for a loose fit and then held in place by the wheel itself. With a separate rotor and hub, you can easily repair or replace one element of your brake system without having to junk the whole thing.
Calipers
Kodiak calipers are constructed of cast iron to prevent flexing. Less flex means more braking torque, resulting in smooth, even braking every time. The corrosion-resistant stainless steel piston is 30 percent larger than standard pistons, ensuring shorter stopping distance and increased torque. In addition, the unique low-drag design of Kodiak's calipers allows the piston to retract farther than in most standard models, giving you a cooler-running brake.
Mounting Brackets
Designed for axles with 4-bolt brake flange configurations, the included mounting brackets are made of heavy-duty ductile iron that is embossed to provide additional threading for guide bolts. The added thread strength ensures a tighter, more secure connection between the caliper and bracket. Another unique feature of Kodiak's brackets is the side-support angle, which guarantees that the load is carried by the bracket, rather than the bolts.
2/R-10-DDD-K Kodiak Disc Brakes - 2 Wheel Set - Rotor Only - Dacromet Finish - 3,500 lbs
Replaces Kodiak K2R35E (2/RCM-10-E-KIT), K2R35SC (2/RCM-10-SCAD) and 2/RCM-10-DAC
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- Did not arrive in time
Customer Reviews
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - K2R35D
Average Customer Rating: 4.8 out of 5 stars (86 Customer Reviews)
Trailer disc brake kit includes 2 assemblies with corrosion-resistant, Dacromet-plated rotors; calipers; and mounting brackets. Assemblies fit 3,500-lb axles and 14" and larger wheels. The 10" rotor features a 5 on 4-1/2 bolt pattern.by: 2003 Trail Master Trailer with disc brakes04/10/2024
Nice replacement for older Kodiak disc brakes. The quality looks like it's pretty good, but only time will tell since. The kit was simple to install if you already have similar style setup and axle mounting bracket.
This disc brake kit - Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs was used with the Demco Hydraulic Brake Actuator w/ Electric Lockout - Disc - Zinc - 2" Ball - 7,000 lbs
by: Tommy06/24/2023
Finished drum to disc brake conversion on my 1993 year model Bass Cat trailer. Installation went smoothly and the UFP-A60 Actuator replaced the obsolete Atwood Actuator. Shortened the outer member a bit and added a 1" flat bar to the bottom for welding of 4" channel trailer frame.
by: Leonard05/04/2024
Worked great.
by: Jeff08/15/2023
poor packing open boxes
Brooke M.
8/17/2023
Oh man, all around not good. I am glad to see that our customer service team has shipped the replacements you need!
by: Ralph06/19/2022
E trailers website provides enough info for me to find the exact product I need and the billing and shipping info is excellent. I will be going back for parts in the future!
Ralph
10/8/2022
Excellent, completely satisfied!
by: Charles 04/24/2024
That's what I needed
by: Joel M07/25/2018
Great Products, not cheaply constructed, really easy to install, following simple instructions. Replaced 10 by 2 inch drum brakes. Looks awesome.
by: Thomas 11/05/2022
Great n fast
Thomas
11/6/2023
Great product
by: Raymond S12/27/2016
another successful project completed !!
PB blaster and Lubrimatic bearing marine lube (550 deg dropping point), highest on the market
by: Matt 04/25/2023
Easy installation onto my boat trailer. I would have gave it five stars if they would have included the bolts, lock washers, and nuts to secure the caliper bracket. Would have made things way easier.
by: Jim K08/20/2016
I just replaced the brakes on my trailer with this, Kodiak Disc Brake Kit in Dacromet. It replaces the same kit but in plain black E-coat finish. The only reason was a few years ago I lost a hub and left 1 disc covered in grease and when I replaced the hubs on that axle (on the side of the road) I disconnected the brake system to simplify things. It's sat for the last 2-3 years for the most part so instead of cleaning up the others and just replacing discs, a bracket, pads etc. and having to clean the calipers good, I decided it was wiser to start from scratch for not much more cost. I'm glad I did. I feel better with a new brake system, the Dacromet finish should do very well (although the E-coat didn't show any issues). The kit was easy to install and get going and works great.
Not that it's important, and wasn't the reason, but it looks good too. I also replaced all wheels and tires with A21514RTM45SM and when I got back from the first road test, I was pleasantly surprised about how good the wheels and brakes looked as I inspected everything. Having the light color finish made it much easier to see when working under the trailer where it's darker also. Just a bonus! And once again, eTrailer couldn't be beat for cost and quick delivery!
by: Kyle 12/21/2023
Paula was excellent.
Even a follow up email to confirm my delivery!!
by: Derrick 04/07/2023
After a year there still working great and rust is minimal, would definitely use etrailer for all my trailer needs
by: Kevin 05/07/2023
Worked out perfect, actually used as front brakes on a 1927 roadster.
by: Jeff O.01/19/2018
I have a 2011 Lund impact 1775 on a Shorelander single axle trailer which tips the scale around 2500# dry. I felt that surge brakes would be a smart investment and take some pressure off my Ford F150 to help stop that beast. I researched kits, actuators, calipers and rotors and decided on the Kodiak caliper and rotor kit and the Titan actuator. eTrailer had both in stock, a convenient hose kit to boot and fair price so I purchased the lot from them. Delivery was very quick and all of the hardware arrived together and in good shape. It took me one afternoon to assemble the actuator on my swing \-away tongue and another to install the calipers and rotors. There was one snag with the hose kit, in that one of the hoses was incorrect. I contacted Bryan at eTrailer and he was very accommodating; rushing the correct hose to me and then following up by phone when I received it. It took about two hours to finish the installation and I couldn't be more pleased, both with the quality of the products and the first-rate service! I have yet to bleed the system and take it out for a run but I don't anticipate any issues. I fully recommend eTrailer, their products and service!
Jeff O.
1/21/2019
I want to thank you again for your assistance in getting me the correct parts for my trailer brake installation. I took three major road trips with the boat last year and the trailer brakes worked flawlessly. The major reasons I installed the braking system were: the overall weight of the boat and trailer in relationship to my pickup 2006 F150 and braking performancesafety on wetslick roads. Both of these concerns were tested last year with wonderful results. I have been telling my friends, with similar trailer packages, to investigate your product. Thanks again,
by: Hank B05/16/2013
Nice quality caliper/Disc set.
Hard to find a setup that has rotors without the Hub and Disc as a one piece unit.
This Kodiak has a few configuration options for a separate Disc Rotor.
Only one problem is that the shipping container had no packing for the protection of the components.
The brake caliper hose fittings had broken through the boxes and were exposed outside the packaging. The seal plugs had fallen out of the brass caliper connections.
This is a less than acceptable and desirable way to protect the units.
Hank B.
5/16/2014
They are still excellent in performance and quality.
by: Albert04/06/2019
Straight forward installation although wish the installation nuts & bolts to mount the caliper brackets would have been included in the kit. Especially like the greater piston size and fact that they pull back after braking so the pads are not dragging on rotor when not braking.
Vastly improved braking and stopping distance over the old electric brakes.
Albert
4/6/2020
Been a year, brakes are so responsive and work so much better will never rely on the old way further. Still working great, never any problem and have never experienced any fade. Switch now and enjoy the added safety.
by: Chris K.03/18/2015
The brakes fit my 2006 Ranger boat trailer, w 15 in tires, I like this style of brake for one reason, the disc just fits over the hub and there is no messing with bearing and getting greasy.
Chris K.
3/19/2016
they work great, i put them in my 06 Range boat trailer and know i have breaks once again.
by: Ron 09/06/2023
Very fast service
by: Walt A.03/13/2017
Paired this set of brakes with a HydraStar electric over hydraulic actuator for a cargo trailer that did not have brakes. Very satisfied with the quality look and performance so far. This set up will lesson the load on my truck/camper and allow for a more relaxed ride knowing I have additional stopping power. The instructions & available online information at Etrailer made it pretty simple. I expect these to perform as intended for many years. Etrailer was a great choice for me.
by: DerekB05/21/2019
A couple of years after purchasing my boat I realized the the brake calipers on my boat trailer had seized. As a result the rotors were rusty and pitted. I selected this kit on etrailer because it had great reviews and was in the price range I had budgeted. The kit was easy to install and had great instructions. Towing my boat is actually a positive experience now that it has properly functioning brakes!
by: Jeff10/01/2022
Wish in the description that if you were swapping drums for discs that you had to get new hubs. Otherwise excellent experience.
by: Robert05/25/2020
I am reviewing the components and etrailer as they are not installed yet. Online ordering was easy - I was contacted immediately with shipping time and tracking numbers - it all went really well. The components showed up on time and in good condition. The boxes were a little hammered but UPS does that. Thanks etrailer good service - good prices: what else do you want?
by: Philip D.02/19/2017
After reviewing several choices for adding brakes on my new Haulmark cargo trailer, I decided to go with these Kodiak over-the-hub disc brakes. They fit perfectly and am very well pleased with them.
25
86
Show More Reviews
See what our Experts say about this Kodiak Trailer Brakes
- Are There Replacement Brake Pads for the Tie Down Engineering (TDE) 46304 Disc Brake CalipersI do have an option for you but we don't offer any replacement brake pads for the Tie Down Engineering (TDE) 46304 Caliper as the company is no longer in business. Therefore, our only option to you would be a full replacement for which I recommend the Kodiak Disc Brake Kit part # K2R35D if you have a 3,500 lb axle or the Kodiak Disc Brake Kit part # K2R526D is you have a 5,200 lb or 6,000 lb axle.
view full answer... - Galvanized Idler Hub That Fits Square #84 SpindleLet's start with the spindle and hub you asked about, and they are indeed compatible. Reason why is this spindle accepts hubs with inner bearing L68149 and outer bearing L44649, which is exactly what the Easy Grease hub you mentioned uses, so the two will work together: - Square #84 Spindle for 3,500-lb Trailer Axles # TRU47FR - Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-35-G-EZ-K And as for the hanger kit and leaf springs you mentioned,...
view full answer... - Can Kodiak Disc Brake Kit # K2R35D Replace Idler Hubs on Demco Tow DollyThank you for including a photo of your idler hubs. The Kodiak Disc Brake Kit you referenced, part # K2R35D, requires a standard 4-bolt brake mounting flange in order to mount. The standard 4-bolt square mounting flange that this kit will fit, part # 4-35, is shown in the linked photo which includes measurements of the hole spacing. We do not recommend drilling your existing flanges; it is better to have a qualified welder replace them with the correct ones. Your existing hub appears to...
view full answer...
- Complete Disk Surge Brake Setup Recommendation for a Rogue Tandem Axle Boat TrailerWe have everything you need, just not in one kit. For a disk brake kit that will bolt up to your 4 bolt brake flanges and will slip over your 5 on 4-1/2 inch bolt pattern you would want the part # K2R35D for a dacromet finish. Or if your trailer will see salt water I would recommend the stainless steel kit part # K2R35S. You will need a quantity of two of these kits for both axles. For a brake line kit you will need the part # DM5425. And then for a surge brake actuator you would want...
view full answer... - Recommended Disc Brake Conversion Kit and Parts for a Holsclaw Boat TrailerThanks for the additional information! We do have all the parts necessary to convert your Holsclaw Boat Trailer to disc brakes. I have listed them below along with any installation videos we may have. Brake Actuator - Demco Hydraulic Brake Actuator w/ Electric Lockout item # DM62VR Idler Hub for item # L44643 Inner and Outer Bearings - Dexter Trailer Idler Hub Galvanized item # 8-259-50 Disc Brake Kit - Kodiak Disc Brake Kit item # K2R35D Brake Lines - Kodiak Hydraulic Brake Line Kit...
view full answer... - Can 90-Degree Brake Line Be Straightened for Installation ClearanceYes, you can replace the 90-degree flare fitting with a straight line on your disc brake installation or you can straighten out the bend in the existing 90-degree fitting. There is less risk of crimping the line when you straighten one out than than when you try to put a bend into a straight one but do this slowly and carefully if that is your choice. If you can slide a piece of wire into the line before you apply force to it this will help prevent internal crimping.
view full answer... - Recommended Replacement For A Tie-Down Engineering Disc Brake HubI will start by saying that your TDE 11033L hub uses the # L68149 inner bearing and # L44649 outer bearing, which means you have a pretty standard #84 spindle on a 3,500 pound axle. With that said, we do not carry Tie Down Engendering products, so the actual hub will cause some difficulties. Especially being oil bath as hubs for this size axle were only ever really done by TDE. Just as an example, if you look at the Kodiak Trailer Hub # Q-HUB84545 that will fit the Kodiak 10" Rotor # KR10D,...
view full answer...
- Compatibility of Kodiak Disc Brakes With Tie Down 660 Surge Brake Actuator?Yes, the Kodiak Disc Brake Kit # K2R35D will work with your Tie Down 660 surge brake actuator. Do ensure that your actuator is rated for use with disc brakes as your actuator can be used with disc or drum brakes depending on what master cylinder it has. We do have the Dexter DX7.5 Drop-N-Go Brake Actuator # 099-175-20 you can switch to if your actuator is only compatible with drum brakes. This has the same mounting bolt pattern and 2" ball coupler for the Tie Down 660.
view full answer... - 10" Stainless Steel Replacement Rotors For Kodiak Disc Brake Kit # K2R35D Dacromet RotorsYes, the Kodiak 10" Rotor Stainless Steel # KR10S can be used to replace the Dacromet coated rotors that come with the Kodiak Disc Brake Kit # K2R35D. You will not have to replace the caliper but I do recommend upgrading to the Kodiak Ceramic Brake Pads w/Stainless Steel Backing Plate # K225CPSS.
view full answer... - Are Brake Pads Included with the Kodiak Disc Trailer Brake Kit, # K2R35DYes. The Kodiak Disc Brake Kit, # K2R35D, comes with High-performance, ceramic brake pads. I have included a link to the installation details for you to view.
view full answer... - Adding Electric Over Hydraulic Disc Trailer Brakes To a 2017 Triton AUT 1272 Utility TrailerI spoke to a Triton trailer representative who informed me that you will have to check your current axle to ensure you have the flange to be able to mount the disc brake caliper for the Kodiak Disc Brake Kit # K2R35D on your 2017 Triton AUT1272 utility trailer. This flange will be a 3" x 3" square with 4 bolt hole located directly behind your idler hub on the spindle. The Titan BrakeRite I Plug and Play Electric-Hydraulic Actuator Kit # T4813102 and Kodiak Hydraulic Brake Line Kit # 15SI-BLKIT...
view full answer... - How to Determine Correct Brakes for TrailerThere is no way for us to know what brakes are needed on any specific trailer, but we can tell you how to figure out what you need. For both you need to have a brake flange and to know your axle capacity, but starting with drum brakes you also need to know the measurement of your drum For example the Hydraulic Brake Kit # AKFBBRK-35-D is for a 3,500 lb axle and fits a 10" diameter x 2-1/4" wide drum. For disc brakes you need to know the size of the rotor you need and your wheel bolt...
view full answer... - Will Kodiak Disc Brake Kit Fit on Trailer with Null Disc Brake KitThe great thing about the disc brake kits we offer like the Kodiak Disc Brake Kit # K2R35D is that they are designed to fit the standard brake mounting flanges on trailer axles like what you have. So what that means is that the mounting brackets of this kit plus the calipers will fit and align perfectly on your trailer as well. As long as your trailer has idler hubs with 5 on 4-1/2 inch wheel bolt pattern you'd be totally set. I attached an install video link for this kit to this page...
view full answer... - Kodiak Disc Brakes For 3,500 lb Axles on Travel TrailerAppreciate the photos, they were great, and you are 100 percent right that the correct disc brake kit for you is the 3,500 lb kit from Kodiak: - Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet # K2R35D The # K2R35D have the right size rotor, fit a 4-bolt mounting flange which your photo shows, and will slip on over the hub. This is the complete kit that includes all the parts needed for new brakes - the rotors, calipers (which come with brake pads), mounting brackets, and bolts...
view full answer...
- What are the Included Bolts of the Kodiak Disc Brake Kit # K2R35D Used ForThe 4 bolts that the Kodiak Disc Brake Kit # K2R35D that you referenced comes with are for securing the calipers to the included mounting brackets. It does not come with hardware to secure the bracket to your brake flange.
view full answer... - Converting from Electric Drum Trailer Brakes to Kodiak Hydraulic Disc Trailer BrakesTo upgrade your car hauler to Disc Brakes will require several items. Since you are already setup with a brake controller for controlling electric brakes, the easiest way to upgrade would be to add an electric over hydraulic brake actuator to the trailer, like the Titan BrakeRite, # T4813102. The pump in this actuator will be activated by the brake output circuit coming from your brake controller. If your brake controller is proportional, you will need to make sure it is compatible with...
view full answer... - Replacement Caliper and Bracket for the Kodiak Disc Brake Kit item # K2R35DYes we do. The calipers and brackets for the Kodiak Disc Brake Kit item # K2R35D can be purchased separately. The caliper is item # KDBC225DAC and the brackets are item # KCMB10RD. I have linked a diagram of the bracket for the Kodiak Disc Brake Kit item # K2R35D along with an installation video. We do not have one with a 2-3/8" top to bottom hole spacing or 3-1/8" side to side.
view full answer...
- How To Add Disc Brakes to Timbren 3.5K Axle-Less Trailer Suspension SystemThe Timbren Axle-Less Trailer Suspension System part # A35RS545 has a 3,500 lbs capacity and it comes with idler hubs. In order to add disc brakes to this setup you'll need the Kodiak Disc Brake Kit part # K2R35D.
view full answer... - Where to Install Single Disc Brake Kit on Tandem Axle Trailer?Normally when installing a single set of disc brakes like the Kodiak Disc Brake Kit for Single Axles # K2R35D on a tandem axle trailer, you'll want to install the new brake kit on the rear axle. Placing the brakes on the rear axle is normally the standard since the rear axle has greater traction than the front axle-consider that the front axle hits bumps first. Also, if you decide to add brakes to the front axle in the future you'll already have the brake lines in place, so you won't have...
view full answer... - What Info Is Needed to Add Brakes to Utility TrailerHey Morris, to determine what would be needed to add brakes to your trailer will come down to a few things. First we'd need to know the axle capacity of the trailer, it would need to have brake flanges on the spindles, and we'd need to know the wheel bolt pattern. I attached a help article that will walk you through this entire process. And then to allow the brakes to activate in the event of a disconnect you would need to have a breakaway kit installed like the # 3802336.
view full answer... - How To Find Correct Replacement Hubs for Skeeter SX2250 TrailerI have a few options for you to help with identifying the correct hubs on your trailer. The first and easiest method would be to crawl under the trailer and look for the axle tag on the beam. This should give an axle capacity which we can then use to find the correct hubs. The Easy Grease Trailer Idler Hub Assembly part # AKIHUB-545-35-G-EZ-K for example is for 3,500 lb axles and uses L68149 and L44649 bearings. The other option would be to take the hubs off the trailer and either read...
view full answer...
- Can Tandem Axle Trailer Have Electric And Hydraulic Brakes With Weight DistributionThe first thing I recommend is to address the issues you are having with the electric brakes you have on your trailer currently. If you install hydraulic brakes on one axle, the problem may still be present with the electric brakes and could cause further issues if not corrected. If you wish to send more information about the problems you are having with your system we may be able to resolve the issues you are having. Adding a hydraulic coupler could affect where the weight distribution...
view full answer... - Everything Needed to Install Electric Over Hydraulic Disc Brakes on Trailer with 3,500 lb AxleI can help you pick out the parts you would need and make it as simple as possible, but there isn't a single axle electric over hydraulic kit that includes everything. You would want to start the part # HS381-9067 which comes with the nicest actuator around, a breakaway kit, junction box and the needed wiring. For the brake components you would want the part # K2R35D for a 3,500 lb kit unless the trailer will be seeing saltwater. In that case you would want the # K2R35S instead. For a...
view full answer... - Recommended Disc Brake Conversion Kit and Parts for a Holsclaw Boat Trailer Thanks for the additional information! We do have all the parts necessary to convert your Holsclaw Boat Trailer to disc brakes. I have listed them below along with any installation videos we may have. Brake Actuator - Demco Hydraulic Brake Actuator w/ Electric Lockout item # DM62VR Idler Hub for item # L44643 Inner and Outer Bearings - Dexter Trailer Idler Hub Galvanized item # 8-259-50 Disc Brake Kit - Kodiak Disc Brake Kit item # K2R35D Brake Lines - Kodiak Hydraulic Brake Line Kit...
view full answer...
Do you have a question about this Trailer Brake?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Jacob T
Installed by:
Jeff D
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Tommy
7/2/2023
Disc brake installation went smooth and easy. It would have been better to have the adapter plate mounting hardware. One think to note about these Kodiak disc brakes, the bleeder valve is a two part valve. Be sure to open the 516 hex bleeder screw and not the 38 screw in bushingseat.