bing tracking image
Customer Service My Orders
Q & A Icon

Complete Disk Surge Brake Setup Recommendation for a Rogue Tandem Axle Boat Trailer  

Question:

I have a RogueTrailer tandem axle 5000lb boat trailer with Trailer Buddy axles and Buddy hubs. Bolt pattern is 5 by 4.5. It came without brakes and I would like to put hydraulic surge disc brakes in place. 4 hole brake bracket is on the axle. Probably both axles. What recommendation for a complete kit do you have?

1

Helpful Expert Reply:

We have everything you need, just not in one kit.

For a disk brake kit that will bolt up to your 4 bolt brake flanges and will slip over your 5 on 4-1/2 inch bolt pattern you would want the part # K2R35D for a dacromet finish. Or if your trailer will see salt water I would recommend the stainless steel kit part # K2R35S. You will need a quantity of two of these kits for both axles.

For a brake line kit you will need the part # DM5425.

And then for a surge brake actuator you would want the Titan Zinc-Plated Brake Actuator w/ Electric Lockout # T4750820.

expert reply by:
1
Jameson C
Ask The Experts a Question >>

Products Referenced in This Question




Product Page this Question was Asked From


Featured Help Information

Instructions

Instructions for K2R35S

Miscellaneous Media

adding-hydraulic-disc-brakes
Parts Needed to Add Hydraulic Disc Brakes to a Trailer
Kodiak Trailer Brakes - Disc Brakes - K2R35S Review
Kodiak Trailer Brakes - Disc Brakes - K2R35S Review - Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>