How to Determine Correct Brakes for Trailer
Question:
I have a Kara trailer Vin # 5KTBS19195F190741. Need to talk to a specialist to figure what all the parts I need to order.
asked by: Tom M
Expert Reply:
There is no way for us to know what brakes are needed on any specific trailer, but we can tell you how to figure out what you need. For both you need to have a brake flange and to know your axle capacity, but starting with drum brakes you also need to know the measurement of your drum For example the Hydraulic Brake Kit # AKFBBRK-35-D is for a 3,500 lb axle and fits a 10" diameter x 2-1/4" wide drum.
For disc brakes you need to know the size of the rotor you need and your wheel bolt pattern. For example the Kodiak Disc Brake Kit - 10" Rotor # K2R35D has a 5 on 4-1/2" bolt pattern. I have added a link to a help article which explains how to measure bolt patterns if you aren't sure. I've also added links to help articles detailing everything you need in order to add both drum or disc brakes.
Then you will need the proper hydraulic coupler, which will be different for drum or disc brakes, as well as a brake line kit. I have added links to our selection of each for you as well.
Products Referenced in This Question
Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Kodiak
more information >
Product Page this Question was Asked From
Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Free Backing
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Q&A: Replacement Hydraulic Brakes and Hub/Drum Assembly for 3,500 lb Boat Trailer Axle
- Shop: Kodiak Disc Brakes - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs - E-Z Lube
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Video: BoatBuckle Tie Down Straps - Trailer - IMF17632 Review
- Video: BoatBuckle Pro Series Kwik-Lok Transom Tie-Down Straps Review imf17632
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-EZ-K
- Video: TruRyde Trailer Bearings Races Seals Caps - Caps - RG04-040 Review
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-K
- Video: BoatBuckle Kwik-Lok Transom Tie-Down Straps Review
- Video: BoatBuckle Heavy Duty Ratchet Transom Tie-Down Straps Review
- Q&A: Replacement Hydraulic Trailer Brakes, Hubs, and Bearings For a Trailrite Boat Trailer
- Q&A: How to Determine Which Drum Brakes to Get
- Q&A: Replacement Trailer Brake Drums For Dico 15638 With ST175/80R13 Wheels and Tires
- Q&A: Correct Replacement 10" Free-Backing Braking Assemblies
- Q&A: Troubleshooting Grease Seal Failure when Using Bearing Buddy Bearing Protectors
- Q&A: Does The Bearing Buddy Protect the Bearing from Water
- Shop: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: U-Bolt Kit for Mounting 3,500-lb, Round Trailer Axles - 5-1/2" Long U-Bolts
- Shop: BoatBuckle Kwik-Lok Transom Tie-Down Straps - Stainless Steel - 2" x 4' - 333 lbs - Qty 2
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Search Results: 7 way plug
- Search Results: boat trailer pads
- Search Results: trailer brake pads
- Search Results: 2x6x8 bunk boards
- Search Results: trailer jack
- Search Results: caliper
- Search Results: kod59fr
- Shop: Brake Controller