A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson
(71 reviews)
Price: $130.77
In Stock
A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson
Item # DL22530
Our Price: $130.77
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (71)
- Q & A (0)
- Photos
Dutton-Lainson Trailer Jack - DL22530
- Car Hauler
- Enclosed Trailer
- Utility Trailer
- 0 - 1000 lbs
- Sidewind Jack
- Bolt-On
- Weld-On
- A-Frame Jack
- Leveling Jacks
- Tongue Jacks
- 15 Inch Lift
- No Wheel or Foot
- Steel
- Dutton-Lainson
1,000 lb Sidewind A-frame Jack
Features:
- 1,000 lb. A-frame jack
- 15" Travel
- 29-3/4" Maximum tongue height
- 15-1/4" From bracket to the top of the jack
- Inner tubing diameter: 1-3/4"
- Outer tubing diameter: 2"
- Can be welded or bolted to standard A-frame couplers
- Zinc plated TUFFPLATE finish for a longer life
- Zinc plated yellow chromate TUFFPLATE finish has three times the corrosion resistance of standard zinc plated trivalent chrome process and 30 percent greater corrosion resistance when compared to powder coated finish. Results of lab test using 5 percent neutral salt spray confirms our TUFFPLATE finish provides in excess of 500 hours against First Red Rust and in excess of 100 hours of First White Corrosion.
- Removable foot sold separately
- 3-Year limited warranty
- Made in the USA
How to Determine the Lift Capacity You Need in a Jack
A trailer jack is designed to lift the tongue of your trailer so you can connect the trailer coupler to your hitch ball. To do this, you'll need a jack with a lift capacity high enough to handle your trailer's tongue weight.
Tongue weight is the amount of weight that your trailer applies to the back of your tow vehicle. Typically, your tongue weight should be 10-15% of your total trailer weight (trailer + cargo). In other words, a 10,000-lb trailer would have a tongue weight between 1,000 lbs and 1,500 lbs. For a trailer this size, you would need a jack with a lift capacity of at least 1,500 lbs.
It's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher lift capacity should operate more efficiently, allowing you to spend less time cranking and more time camping.
Trailer and Camper Jack Lift
Every jack offers a certain amount of lift or travel. Screw travel is the distance the jack extends when you crank it (or toggle it to "extend" on an electric model). Some jacks include a drop leg for extra adjustability. On these jacks, you'll see the maximum extension of the drop leg listed in the specs as well. Adding the screw travel and drop leg travel together will give you the total lift. The total lift listed above can help you determine how high this jack will be able to raise your trailer.
22530 1,000 lb A-frame Trailer Jack by Dutton-Lainson Model 6418
Customer Satisfaction Score:
91% were satisfied with this product
9% of customers were not satisfied
- Wrong item was ordered
- Alternate product found
- Did not fit
Customer Reviews
A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson - DL22530
Average Customer Rating: 4.9 out of 5 stars (71 Customer Reviews)
1,000 lb Sidewind A-frame Jackby: Paul09/03/2023
The Jack was easy to install and etrailer was the only place I could find the right one to fit my very old (1999) tent trailer.
by: David05/03/2020
Once I modified my camper tongue, the jack fit and operated flawlessly.
by: Moose05/07/2020
Most 1000 lb jacks are too wide for older camper trailers like mine. This was the only option i could find with a diameter of 2 inches! Took some elbow greasr, but once it went in the rest was easy and the included hardware worked very well. I would recommend adding 3-6 washers as they're not included and make a difference. It cranks clean and smooth! Great product so far. Customer service was very active and helpful in making sure I got what I needed and there were no issues. Odelia was very helpful! Thank you etrailer!
by: William H.07/11/2016
The trailer jack was easy to install and works great. The removable foot is very convenient.
by: Bill 06/21/2023
This was a good replacement for the original on our vintage camper. Pretty simple - just used a grinder to remove the welded on old one, and bolts to attach the new.
by: Lorin05/31/2023
Unfortunately my initial search for a replacement for the Atwood Model 80274 suggested the Pro Series 2000 LB jack. But trying to install that jack I found it was too big. However talking directly to customer service they were able to direct me to thing model jack which was a direct replacement that I needed. They took back the wrong jack with no problems.
by: Woodjunky09/10/2017
Once again, etrailer impresses me. Ordered my jack stand on Friday and it arrived on Saturday. What great service!
Woodjunky
9/10/2018
I love the products and the value. The lights and jack are hard at work on my boat trailer. Thanks for the follow up.
by: Ed09/16/2016
*Although I have not installed the trailer jack yet it looks like a direct replacement for the original one on my boat trailer. The wheel that goes with the jack definitely looks like a better fit than original.
*The electrical 4 conductor plug set... I'm using for a quick disconnect for a third
( center ) brake light for tailgaters
by: Mark 11/18/2020
This trailer Jack has all the capacity and lift height I need. It cranks easy, has a nice finish and in my opinion, of good quality.
by: Jason 06/29/2022
Excellent product the quality was better than the original jack on the camper from the manufacturer
by: MARVIN03/21/2014
PURCHASED NEW COUPLER, JACK, AND FOOT.
ALL WERE OF GOOD QUALITY, THE COUPLER, INSTALLED, QUITE EASILY, (REPLACEMENT FOR WORN OUT COUPLER)
THE JACK AND FOOT PA WORK VERY WELL.
HIGHLY RECOMMENDED
by: Brad 11/29/2021
Looks like a good jack that will fit the smaller outer tube dimension for a vintage trailer.
by: Jon 04/23/2021
Great product wish they had the option of coming without the triangle mounting. I will have to remove this but so happy to find this size for my vintage trailer!
by: Kenneth a03/03/2018
Nice trailer jack. Fit perfect in place of my broken one.
by: Bill 12/27/2022
Works well
by: Jeff12/07/2017
Perfect replacement. took about as long to install as it did to open the box. Great product.
by: John03/13/2020
Although I haven't had a chance to install my new products yet I have to tell you how happy I was to recieve my shipment so quickly. Well done etrailer!
by: Mr. Larry 07/06/2019
Fit, value, product performance and customer service top notch !!!
Mr. L.
7/7/2020
Went on perfect and still working like a champ !!!
by: John09/15/2015
George, ordered it and it was here in 3 days, great service!
Thanks,
by: Louis11/15/2023
Fit great
by: Danny N.07/12/2013
Product was exactly as described!
It fit correctly and works good!
by: Mehgan07/06/2023
by: Thomas 07/01/2021
by: Richard 06/04/2023
25
71
Show More Reviews
See what our Experts say about this Dutton-Lainson Trailer Jack
- Replacement Jack for 1997 Starcraft Meteor 814 ClassicWe don't offer a replacement jack that would be compatible with the bracketry you show in your photo, but we do offer an option that would work for you. Folks use side-mount jacks on A-frame trailers all the time, but as you found they're not very stable because of the tilting force placed on them because the load is off-center. I'd recommend replacing your existing coupler with part # CA-5100-Z which would provide a strong and secure mounting location for the jack. The coupler is a weld-on...
view full answer...
- Recommended Trailer Jack to Replace ALKO Jack with 2 Inch Outer DiameterThe best option jack we have that has a 2 inch outer diameter is the A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson # DL22530 which can use the landing foot # DL22541 or the caster # DL22414. This obviously has the A-frame mount integrated but is the only option we currently have for a 2 inch outer diameter jack. Most of the inner tubes have that diameter. If you'd like to consider a different style mount, I'd be happy to help further, I just need the trailer capacity...
view full answer...
- Adapting a Coupler to Fit a Standard 2-1/4 Inch A-Frame Jack Outer DiameterThe only jack we have that has that 2 inch outer diameter upper tube is the Dutton-Lainson A-Frame Trailer Jack - Sidewind - 1,000 lbs item # DL22530. If your trailer's a-frame coupler will not accommodate anything larger than a 2" jack you will need to make the hole bigger to accept the standard 2-1/4 inch outer tube. You can use a hole saw, a grinder, a handheld file to accomplish this.
view full answer... - What Are the Dimensions and Hole Size of Mounting Flange on Dutton-Lainson Trailer Jack, # DL22530,I went out to our warehouse and measured the Dutton-Lainson Trailer Jack, # DL22530, the mounting flange hole size is 7/16 inches x 3/4 inches and the dimensions from center of one hole to the center of the next hole is 3 inches. They are equally spaced apart.
view full answer... - A-Frame Trailer Jack with an Outer Tube Diameter of 2 InchesAn A-frame trailer jack that fits your 2 inch outer tube diameter is the Dutton-Lainson # DL22530. It provides 15 inches of lift and has a 1,000 pound capacity. When fully retracted you'll have about 8-3/4 inches of clearance. Of the 2 inch diameter jacks we carry this is the least amount of clearance available.
view full answer... - Retracted and Extended Height of Dutton Lainson Trailer Jack DL22530The retracted height of the Dutton Lainson Trailer Jack # DL22530 is 8-1/4 inches and the extended height is 23-1/4 inch. From the mounting bracket to the top of the jack measures 15-1/4 inches.
view full answer... - Solution for Replacing Trailer Jack with 2 inch Outer DiameterThe most common outer diameter for an a-frame trailer jack is 2-1/4 inch but the 2 inch diameter you have is also reasonably common as well. In nearly all situations a 2-1/4 inch jack will replace a 2 inch jack as the hole on the trailer frame where the jack passes through is big enough for both sizes. If you do find that you need the 2 inch diameter we have the Dutton Lainson part # DL22530 which is this size. Otherwise if you can get away with 2-1/4 inch the part # TJA-5000T-B would...
view full answer... - Wheel Caster for Dutton Lainson Trailer Jack DL22530For the Dutton Lainson trailer jack part # DL22530 that you referenced we have the replacement wheel part # DL22414.
view full answer... - Recommended A-Frame Jack With Close To A 1-7/8 Inch DiameterFor an A-frame jack that meets that diameter criteria, I recommend the A-Frame Trailer Jack by Dutton-Lainson # DL22530 . This jack will have an inner tube diameter of 1- 3/4 inches and an outer diameter of 2 inches. It is constructed of heavy duty steel and has a zinc plated finish to resist corrosion. With this jack, I recommend the foot plate # DL22541 or the wheel # DL22414. These inner and outer dimensions are as close as we come to the 1-7/8 inch diameter.
view full answer... - Which Way Will the Handle Face on the Dutton-Lainson A-Frame Trailer Jack # DL22530The orientation of the handle on the A-frame trailer jack # DL22530 will depend on the hole pattern on the trailer. The jack uses a 3 hole pattern that is basically in the shape of a triangle. The handle will be in a different place depending on how you want to mount it. Normally, the handle would be off to the left side of the trailer.
view full answer... - Recommendation for a A-frame Jack with a 2 inch Post OpeningWe're glad your hitch worked out well! I took a look through our selection of trailer jacks, a 2-1/4 inch outside diameter of the jack's outer tube is pretty common. I did find a 1000 lb capacity sidewind jack that might be a good choice for you if the fully loaded tongue weight of your trailer is less than 1000 lbs. If this is the case, go with the Dutton-Lainson # DL22530.
view full answer... - Best A-Frame Jack w/ a 2 Inch Outer Diameter We do have an A-frame jack with a two inch outer diameter upper tube. It is the A-Frame Trailer Jack - Sidewind - 1,000 lbs. by Dutton-Lainson item # DL22530. This is a 1,000 lbs capacity A-frame jack that has 15" of travel and a 29-3/4" maximum tongue height. This jack has the option for a foot and a wheel. For the foot you will want the Removable Steel Foot with Pin for DL22530 A-Frame Trailer Jack by Dutton-Lainson item # DL22541. For the wheel you will want the Removable Wheel for...
view full answer... - What Weight Capacity of Tongue Jack is Needed for a 4,600 Pound Dry Weight TrailerThe rule of thumb for estimating a tongue weight is 10-15 percent of trailer weight. A 4,600 pound trailer would have a tongue weight between 460 and 690 pounds. Somewhere between a 1,000 to 2,000 pound capacity jack would be fine. Having a jack that is rated for more than the tongue weight is not a problem. The jack you were looking at Pro Series A-Frame Topwind Jack, part # PSEA20000103, would work fine. You could also use Dutton-Lainson jack, part # DL22530 or Bulldog Heavy Duty Jack...
view full answer... - Dimension of the Outer Tube On the 1,000 lb A-frame Trailer Jack by Dutton-LainsonThe Tube that goes through the trailer frame and that the mounting flange is attached to is 2 inches diameter. The inner tube that extends downward to raise the trailer is 1-3/4 inches diameter.
view full answer... - Recommended Replacement A-Frame Tongue Jack for 4500 lb Utility TrailerSorry to hear about your jack. I'd be happy to make a recommendation. Since a trailer's tongue weight is generally 10-15 percent of its total weight, you'll be in the 450-675 lb tongue weight range. We have jacks with tongue weight capacities starting at 750 lbs, but I always recommend going with a heavier capacity than you need. The jack (and you) won't need to work so hard to raise the trailer, and it will therefore last longer. The Bulldog # 2000 lb capacity A-Frame Jack, part # BD155033...
view full answer... - Dimensions of Bulldog Powered Jack BD500199 and Dutton Lainson DL22530Your picture didn't make it through and I am not sure what product you are interested in.
view full answer...
- Recommended Replacement A-Frame Trailer Jack for 2003 Viking Legend TrailerTo replace the AL-KO A-Frame jack on your 2003 Viking Legend Trailer, I recommend the Dutton-Lainson A-Frame Trailer Jack # DL22530. This A-frame jack features a 1,000 pound weight capacity, a 2 inch outer tube diameter and 15 inches of total travel. It has a distance of 15-1/4 inches from the bracket to the top of the jack. You can add a removable foot with part # DL22541 or a caster wheel with # DL22414. You will just want to make sure this has the necessary capacity for the tongue weight...
view full answer... - A Frame Trailer Jack that Has 2 inch Outer DiameterYes, we have the Dutton Lainson A-Frame Jack # DL22530 which has an outer diameter of 2 inches. This jack has a 1,000 lb capacity and has the optional foot part # DL22541 or wheel caster part # DL22414.
view full answer... - Recommended A-Frame Trailer Jack to Replace Existing Jack with Small Diameter Coupler MountMost jacks have an outer tube diameter of 2-1/4 inches. We do have a jack that is slightly smaller with the outer diameter being 2 inches. It is the Dutton-Lainson A-Frame Trailer Jack # DL22530. This will be a great option for your 1948 Mobile Sportsman Camper but you will need to enlarge the hole on your A-frame coupler. I recommend using a rotary tool like a Dremel or a hole saw to enlarge the opening in your coupler for proper mounting. Then you can use the caster # DL22414 or...
view full answer... - Availability of 2 inch Diameter A Frame Jack with Sidewind HandleWe have one sidewind A-frame jack with a 2 inch outer diameter tube, part # DL22530. This is a 1,000 pound jack from Dutton-Lainson that has 15 inches of travel.
view full answer... - USA Made Trailer Axle, Wheel/Tires, and Trailer Jack for 3,500 lb Trailer AxleDexter axles like the part # 35545E-ST-89 that you referenced are made in the USA. This is a 3,500 lb axle like you want but you need to determine which is the correct length axle for your trailer first. I've attached a photo showing where to measure your axle for the correct length. I've also included a link to our axle product listings. Once you know your measurements, you can use the filters on the left side of the page to choose the correct axle. Or, if you'd like, you can send me...
view full answer...
- What is the Circumference of Dutton-Lainson A-Frame Trailer Jack, # DL22530The outer tube of a jack is usually measured in diameter. The diameter of the Dutton-Lainson A-Frame Trailer Jack, # DL22530, is 2 inches. If you take the diameter and multiply it by pi to get the circumference, it ends up being 6.28 inches. You would need a jack that measures 2 inches to 2-1/16 inches in diameter. I went out to the warehouse and all of the smaller A-frame jacks I measured had that 7 inch circumference. However, I do believe I have a solution for you. While I was out...
view full answer... - Recommended Replacement For A-Frame Trailer Jack For 1999 Jayco Heritage Laurel Trailer For an A-frame jack that matches, I recommend the A-Frame Trailer Jack by Dutton-Lainson # DL22530. This jack will have an inner tube diameter of 1-3/4 inches and an outer diameter of 2 inches. It is constructed of heavy duty steel and has a zinc plated finish that will help it resist corrosion. With this jack, I recommend adding the Removable Foot Plate, Item # DL22541 or the Removable Wheel, Item # DL22414. I have attached an article and a video for you to check out.
view full answer... - Replacement A-Frame Jack For Atwood Mobile Product Jack On Trailer With 2" Diameter Mounting HoleThe Dutton-Lainson A-Frame Trailer Jack # DL22530 is currently our only manual A-Frame tongue jack with a 2" outer tube. The Lippert Quick Drop Tongue Jack # LC733926 that supersedes your 423192 jack along with our other jacks have all gone to the 2-1/4" outer tube diameter. The Dutton-Lainson Jack # DL22530 has a maximum capacity of 1,000lbs with 15" of travel for a maximum extended height of 29-3/4" from the mounting surface to the ground.
view full answer...
Do you have a question about this Trailer Jack?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Mike S
Video Edited:
Dustin K
Installed by:
Cole B
Video by:
Chris R
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
David
5/4/2021
Works great.