Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
13" Long x 5/8" diameter steel shaft for 12" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 pal nuts for mounting.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi there boat trailer owners. Today, we're going to be taking a look at CE Smith's replacement keel roller rods. And this is what our replacement roller rod's going to look like. These are available in either two different diameters, whether it be five eighths, like we have here or half inch, you just want to match it up to your old one. And they're also available in varying lengths. So that way you can get the proper span for your particular trailer.
And all of them are zinc coated to protect them from rusting corrosion, which is very common on your boat trailers since you're pulling it in and out of the boat dock all the time, you're next to the Lake. They often get wet. So this way we can ensure that we're going to have long lasting operation of this rod, and it's not going to seize up inside of here due to rust and corrosion.Also included with it you'll receive cap nuts for each side of your rod. And these are nice because once you press them on there, they're pretty much a permanent fit, you have to really try to get them off of there. And since this is a roller, it doesn't ever really get forces side to side, but we don't want to use regular thread on nuts on something like this since it does roll.
That could potentially cause the nuts to back off. So this is an ideal solution. If your old keel roller or keel roller rod are worn out and need replacement, the replacement shaft here is going to be a great option for you because it's kind of a one use thing, unless you can get yourself some new cap nuts. And even if you do get new cabinets, if it's heavily corroded and worn down, those cap nuts may not fit as tight and as properly as they used to.So when replacing your keel roller, when it's wore out, I highly recommend also replacing the keel roller rod. The rod is going to be made of solid steel with a zinc coating.
So it's going to be extremely durable holding up the weight that is pressed down from the boat sitting on it there. And the zinc coat is going to protect it against rust and corrosion. If your keel roller is worn out. And that's why you're looking at getting replacements. We also carry the keel rollers here at etrailer.com.
So you can get a set up just like this. You can see how nice and smooth it is, and we've got a nice surface for our boat to rest on.Today we're going to be replacing the keel roller's shaft because our key roller's all damaged up and in order to get the roller off, we have to take the shaft out and the nuts typically get damaged and are not reusable. So we're just going to be replacing it all as an assembly. Start by removing our roller's nuts. We're just going to get behind it with a pair of pliers. We're just going to pop that cap off of there. inaudible 00:02:18. Our shaft will then slide out. We can remove our roller and then install our new components. We've got our shaft here and I find it easier to get one cap nut on first. So we're just going to set that on top and we're just going to hammer it into place. I'm going to use a rubber mallet just to help minimize how much dings I make on the little cap. And it's really that simple. And you can see here, there's no way I'm going to push this off. If I wanted to get this off of here, I would almost have to take another hammer and smash it off of there because you're just not going to be able to pull it off. Now we can just take our roller. We're going to set it into place. Slide our rod all the way through the roller, until it comes out on the other side. We'll then take our cap, we're going to set it into place. Now that we got it just barely started. We're going to finish tapping it on. I'm going to use a hammer on the other side, because it might hurt your hip or something else if you're holding it. And we can see our shaft spins, our roller spins and it's nice and solid, it's not going anywhere. Thought you need a hatchet. And that completes our look at CE Smith's replacement keel roller rods.
Average Customer Rating: 4.8 out of 5 stars (697 Customer Reviews)
13" Long x 5/8" diameter steel shaft for 12" rollers replaces a worn-out roller shaft on your boat trailer. Includes 2 pal nuts for mounting.The 13" shaft seems to be the right length for the 12" rollers I got; it may actually be a bit longer than 13" which is great
Check the shaft length on your trailer before ordering. My old shaft was longer. The new one bearly had space for the pal nuts. Had to bend the roller brackets to make it fit..
Just what I ordered and got it fast.
Perfect replacements for my old worn out rollers.
I recently purchased two Yates keel rollers , one 12" and one 8".... Was very please with the price , shipping , and the products I received !!! Will be happy to order from you guys again.
Thanks
box came destroyed, OPEN, the axle appears to have been STUFFED in the box causing it to lose intergrity. One of the ubolts boxes was open missing nuts.
etrailer has good products but poor follow up. Had similar issue, they said just go buy one. I already bought one, they didn't send it.
etrailer.com...use the best forget about the rest...
thank you for your prompness
First time ordering roller parts and things turned out just right.
Everything I expected.
Roller was fine but the shaft was about 1/4 of an inch to short. Unable to get one end cap on as a result. Needed to use old roller shaft as temporary fix. Disappointed.
the products were delivered before promised time and were the right fit,
jessica was very helpful and i would not hesiitate to use etrailers again
Overall it's fine but the package was bent (apparently to fit in the box) and cracked open and one of the nuts is missing.
Shipping was timely.
Good so far, we'll see how they hold up.
All the products I've purchased from each trailer have been excellent high quality
I ordered the roller shaft for my salt water bay boat. The shaft itself is fine, but the PAL nuts do not feel or appear to take the riggers of salt water. Believe I will be replacing it in a year or so. I will look for a stainless steel pin with cotter key.
Parts where exactly as described. The shipping was crazy fast.
I would do business with them anytime.
These shafts along with the rollers I purchased should be perfect for my project.
All Ãtem ordered fit as specified. Satisfied customer!
Hi quality for a great price. Overhauled my Boat Trailer rollers, bearings, bunks, wiring and more. I usually shop parts like this on Ebay, Amazon...etc..
Etrailer beat all of their prices, and with free shipping on my $99+ order, the deal got even sweeter. Got my parts in 3 days and had the job done in the next 2 days. All parts fit perfectly and my trailer is like new.
This is my second order from etrailer. As we all know it's "always something" with anything marine related. They have earned my business. Thanks..!!
Great company, fast shipping. thank you
I ordered on Tuesday evening and received what I ordered on Friday morning. Used a band saw to cut off 1/4 inch of the 13" shaft due to my original shafts on my 1994 ProCraft Trailer having 12 3/4" shafts. I'll just have to see if the new rollers last as long as the original rollers, which were also Yates rollers. Representative on the phone was very pleasant to talk to.
The order came faster than expected, and I'm glad I found your site. Although the items I got are not intended for what they are advertised as ( boat trailer loading wheels ) they will be perfect for my application - "welding cart"
This item was exact replacement for my bass boat trailer. Just simply removed old roller and installed this one with no issues.
Do you have a question about this Boat Trailer Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
3/1/2023
I am sorry that the box came this way. I will have our Customer Service team reach out so that we can send out the missing nut for you.