Safety Chain with 2 Hooks for Gen-Y 5th Wheel to Gooseneck Pin Box - 84" Long - 26,000 lbs
(73 reviews)
Price: $98.99
In Stock
Safety Chain with 2 Hooks for Gen-Y 5th Wheel to Gooseneck Pin Box - 84" Long - 26,000 lbs
Item # GY49GR
Our Price: $98.99
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (73)
- Q & A (0)
- Videos (2)
- Photos
Gen-Y Hitch Trailer Safety Chains - GY49GR
- Safety Chains
- 26000 lbs
- Gooseneck Hitch
- Towing a Trailer
- 84 Inch Long
- Single Chain
- Gen-Y Hitch
- Standard Chains
This safety chain is specifically designed to work with Gen-Y Hitch fifth-wheel-to-gooseneck pin boxes. Thread this chain through the cross-shaped cutouts on your pin box, then hook the clevis hooks on your hitch.
Features:
- Safety chain designed specifically for Gen-Y fifth-wheel-to-gooseneck pin boxes
- Thread chain through the cross-shaped cutouts on your pin box
- Hook the clevis hooks on your hitch
- Helps ensure safe towing
- Provides backup connection between your trailer and your tow vehicle
- Grade 70 safety chain
Specs:
- Weight capacity: 26,000 lbs
- Chain length: 84"
- Link diameter: 3/8"
Note: This safety chain is specifically designed to work with Gen-Y Hitch fifth-wheel-to-gooseneck pin boxes. Other safety chains are not compatible.
GH-70684 Safety Chain with 2 Hooks for Gen-Y Executive Fifth Wheel to Gooseneck Pin Box - 84" Long - 26K - Quantity 1
Video of Safety Chain with 2 Hooks for Gen-Y 5th Wheel to Gooseneck Pin Box - 84" Long - 26,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Gen-Y 5th Wheel to Gooseneck Pin Box 2 Hook Safety Chain Review
Hi everyone, Aidan here with etrailer. Today, we're gonna be taking a look at and showing you how to install these safety chains for your Gen-Y gooseneck. This is gonna be a 3/8 inch diameter chain and it's going to be 84 inches long. It's gonna be one section of chain with two clevis hook ends, and it's designed to work with your Gen-Y gooseneck, because the chain just feeds through the cross-shaped holes that are already existing on your pin box here, and there's no need to break out the torque wrench. It's got a 26,000 pound weight capacity and it's going to be a Grade 70 chain. Just like any other safety chain out there, it's gonna be that backup connection between your trailer and your vehicle in case there is an emergency disconnect, you still have this holding it in place.
And like I said earlier, the install process is really easy, there's no need to bolt anything down, break up the torque wrench, it's really just feeding that chain through the pin box, so let's check it out. To start with the install, we're gonna take off one of the clevis hook ends for our safety chains just by grabbing some needle-nose pliers and straightening out this pin right here, so we can take it out. May need to grab your pliers for that too just to get a better grip. And remove the clevis hook, and we can feed that free end of the chain through the gooseneck where we have this cross-shaped hole. So I'm just gonna feed it through this end right here and out the other side, and then we can get it all symmetrical.
So from here, I'm gonna get these nice and even with each other, just pulling the slack out of one side, adding it to the other until everything is draping evenly. Then, once everything's even, we can just grab our hook and our pins, run them back through each other and re-secure the hook by bending the cotter pin back out and securing the hook in place. And that's it for the install, it's a really simple process, and now, we've got our upgraded safety chains on our Gen-Y gooseneck..
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Did not arrive in time
- Wrong item was ordered
Customer Reviews
Safety Chain with 2 Hooks for Gen-Y 5th Wheel to Gooseneck Pin Box - 84" Long - 26,000 lbs - GY49GR
Average Customer Rating: 4.7 out of 5 stars (73 Customer Reviews)
This safety chain is specifically designed to work with Gen-Y Hitch fifth-wheel-to-gooseneck pin boxes. Thread this chain through the cross-shaped cutouts on your pin box, then hook the clevis hooks on your hitch.by: Steve02/23/2024
After using my Genyhitch executive hitch for only one season, I liked it well enough to buy a second one , we decided to downsize our 5th wheel camper, and of course the new one has a different pin box, so it won’t fit, so I have one that fits a Rhino pin box , if anyone is interested, lol. It’s so nice when you unhook all you have in your box is the ball. Quality product!
by: Alan 04/05/2024
This is the 3 rd Gen-y hitch we’ve ordered. We love the hitch and appreciate ETrailers expert knowledge and the time they take to make sure the order is exactly what we need.
They even do a follow up email to let us know it’s been delivered!
Thank you Lauren!
by: Randy03/22/2023
Super easy install. Straighten cotter pin, pull it out, pull pin and hook is removed. Feed chain through, put hook and pin back on and bend cotter. Literally a 5 minute job! Grade 70 chain and about the same as sourcing elsewhere.
by: Mark 03/12/2024
Additional photos. I also had to use the top bolt holes to maintain the bed rail clearance.
by: Dayton09/01/2023
Appears to be as capable as advertised, but of course it's not one of those things you want to have to use. It's easy to add to the hitch as well, with a couple of Pliers to get the pin out on one hook.
by: Doug 04/05/2024
Does the job it was intended for
by: Anthony 12/29/2023
Works great and was easy to install.
by: Mark 11/11/2023
Good solid chain, no rust or concerns. just a little heavy.
by: Mike 03/10/2023
It came 2-3 days after ordering it as they said. Boxed up nicely. so fat I’m happy. Haven’t installed it yet because the camper is still in storage.
by: Greg 08/23/2023
Awesome communication and delivery of products when anticipated
by: Lucas 09/01/2023
Very professional. Order shipped quickly and product looks like it is very good quality.
by: Matthew 05/09/2023
Great product. Great quality.
by: George 04/11/2023
The product is as advertised. Very good quality and the shipping was on point, it even arrived a day earlier.
by: Jeff 02/11/2023
Great product
by: Danny V12/20/2022
Great product and fast delivery.
by: Jeffrey 03/09/2023
by: Jennifer 09/17/2022
Well made. Serves purpose.
by: John 09/29/2022
It fit like it should. I hope I never need to test their strength!
by: Michael 04/18/2024
by: Dan 10/31/2023
by: Richard 02/03/2024
by: Richard02/14/2024
by: Eric 07/14/2023
by: Patrick08/16/2023
25
73
Show More Reviews
See what our Experts say about this Gen-Y Hitch Trailer Safety Chains
- Where Is The GEN-Y Hitch Safety Chain # GY49GR Manufactured? The GEN-Y Hitch Safety Chain # GY49GR is made in the USA.
view full answer... - Replacement Gooseneck Pin box for a Lippert Turning Point There's multiple options for a gooseneck pin box and I will need to know which one your Vanleigh Beacon 5th wheel trailer currently has. If you could email me back a picture of the sticker on your trailer's pin box I will be able to find out which one you need. The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item # GY48GR you were looking at is a replacement option for the Lippert Turning Point. This isn't a common pin box but if you have a Lippert Turning Point this is...
view full answer... - Replacement Pin Box For Grand Design Reflection 150 270BN To Be Towed With Gooseneck Hitch TruckYour Grand Design Reflection 150 270BN uses the Lippert Turning Point pin box. The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box # GY48GR is the only is the only adapter we carry which will convert your pin box to tow behind your truck by a gooseneck hitch. You will need a Safety Chain Kit # GY49GR when switching to a ball connection.
view full answer... - Gen-Y Gooseneck For 2024 Jayco Eagle 355MBQS With Lippert Rhino Pin BoxThanks so much for that info Tyler, and I was able to find the right Gen-Y gooseneck pin box for you. Since you have the Lippert Rhino on your 2024 Jayco Eagle 355MBQS, the right option is the following: - Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box # GY33GR The # GY33GR is the correct replacement for the Rhino, and is for loaded pin weights between 2,500 lbs and 4,500 lbs, which is perfect for the 15,200 lb GVWR of your Eagle 355MBQS; with that GVWR your pin weight will...
view full answer... - Recommended Goose Box to Replace a Lippert Turning Point Pin BoxThanks for the picture and congrats on the new trailer! There is only one replacement option for the Turning Point Pin Box and it is the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item # GY48GR. Reese doesn't have one. The Gen-Y will definitely work with your turnover ball system. You will also need the Safety Chain with 2 Hooks for Gen-Y 5th Wheel to Gooseneck Pin Box item # GY49GR. These are legally required when towing with a gooseneck connection and none of the gooseneck...
view full answer...
- Replacement Gooseneck Pin Box to Replace a Lippert Turning PointThe only gooseneck adapter that can replace a Lippert Turning Point pin box is the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item # GY48GR. As far as tongue weight goes, the loaded pin weight of your Grand Design 260RD needs to be between 1,500 lbs - 3,000 lbs range for this pin box to work properly. It has a built in scale so you can move things forward on your trailer to get the tongue weight up into this range. You will also need the Safety Chain with 2 Hooks for Gen-Y...
view full answer... - Gooseneck Adapter to Replace Lippert Rota-Flex 1621 Pin BoxTo replace your 160468 - which is a Rota-Flex pin box for a Lippert 1621 - you will need to switch to a gooseneck pin box. The correct option to replace your Lippert 1621 is the following from Gen-Y: - Gen-Y Hitch 5th Wheel to Gooseneck Pin Box # GY58GR The # GY58GR has a 21,000 lb towing capacity and is for pin weights between 1,500 lbs and 3,500 lbs. You will also need the Safety Chain with 2 Hooks for Gen-Y 5th Wheel to Gooseneck Pin Box - 84" Long - 26,000 lbs # GY49GR.
view full answer... - Gen-Y Hitch 5th Wheel to Gooseneck Pin Box for Lippert Rhino BoxTo convert your rhino box to a gooseneck you will want to use the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item # GY98GR. This gooseneck pin box is made specifically to replace your rhino box. It has a 21,000 lbs capacity and a 3,500 lbs tongue weight which is perfect for hauling your 2021 East to West Tandara 385 Camper. You will also need the Safety Chain with 2 Hooks for Gen-Y 5th Wheel to Gooseneck item # GY49GR. This safety chain is specifically designed to work with Gen-Y Hitch...
view full answer... - Can 21K Gen-Y Executive 5th Wheel to Gooseneck Converter Replace 16K Lippert Turning PointThe Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box # GY48GR will fit in place of your Lippert Turning Point pin box, yes. The pin weight range of this pin box is 1,501-3,000 lbs which should be right about in your wheelhouse - I do recommend double checking though just to be sure. Another thing to note is this adapter is a little shorter than the Lippert Turning Point so if you were cutting it close on turning clearance then you will definitely be limited with this setup. Be...
view full answer... - Replacement Pin Box To Use Gooseneck Ball On 2022 Grand Design Solitude 310GK-R With Rhino Pin BoxCurrently the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box # GY98GR is the only replacement gooseneck pin box for the Lippert Rhino box. This specific box is auto latching and is rated for tongue weights of 1,500-3,500lbs. Your 2022 Grand Design Solitude 310GK-R 5th wheel has a dry tongue weight of 2,350lbs. Currently Reese does not have a Goose Box or adapters that will fit the Rhino Box. You will need the Safety Chain Kit # GY49GR as they are required by law with any trailer...
view full answer... - 5th Wheel to Gooseneck For 2022 Forest River Sabre Cobalt 5th Wheel With Lippert 1621 Pin BoxThanks so much for that info, and yes, because your 2022 Forest River Sabre Cobalt 36BHQ has a Lippert 1621 pin box, the Gen-Y Hitch 5th Wheel to Gooseneck is a fit. The correct part number is the following: - Gen-Y Hitch 5th Wheel to Gooseneck Pin Box # GY58GR Along with the pin box, the only other thing you need are safety chains, part # GY49GR.
view full answer... - 5th Wheel to Gooseneck Adapter For 2021 Keystone Cougar 29RKS Half-Ton 5th Wheel TrailerYour 2021 Keystone Cougar 29RKS Half-Ton 5th wheel trailer has a Lippert 1621 pin box, so the correct adapter is the following: - Gen-Y Hitch 5th Wheel to Gooseneck Pin Box # GY58GR I also wanted to add that if you don't have safety chains, you'll need part # GY49GR.
view full answer... - Recommended Goosebox to Replace a Turning Point Pin BoxThanks for the pictures and congrats on the trailer! To replace your Turning Point pin box you will want the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item # GY48GR. This is the only gooseneck pin box that fits the mounting points for the Lippert Turning Point you have. It is rated for trailers up to 21,000 lbs with a pin weight of 1,500 lbs - 3,500 lbs. You will also need the Safety Chain with 2 Hooks for Gen-Y 5th Wheel to Gooseneck Pin Box # GY49GR. The Gen-Y gooseneck...
view full answer...
- Recommended Gooseneck Pin Box to Replace a Lippert Turning PointYes, the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item # GY48GR will work with your Reflection 260RD. I looked up the specs on your 5th wheel. It looks like the 1,258 lbs is when you are unloaded. Once you have your trailer loaded up and ready to tow you will be well within the 1,500 lbs- 3,500 lbs range. This Gen-Y pin box has a built-in scale so that you can check and see what your tongue weight is. This is the only gooseneck pin box that is available to replace the...
view full answer... - Clearance and Maneuvering w/ the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item # GY98GRThe Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item # GY98GR is built to replace a 5th wheel trailer's existing pin box so the dimensions and clearance should be similar to what you already have. If you have a short bed truck you are still going to encounter issues when turning or backing depending on the size of your 5th wheel trailer's nose. This 5th Wheel to Gooseneck pin box is only compatible with the Rhino pin box. It has a 21,000 lbs capacity and a 3,500 lbs tongue weight. You...
view full answer... - Gen-Y Hitch 5th Wheel to Gooseneck Pin Box For a 2020 Grand Design Solitude 310GKFor your 2020 Grand Design Solitude 310GK you will need the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box # GY58GR. This will bolt to the 1621 pin box bolt pattern you have on your Solitude. You will need the Safety Chain # GY49GR as all ball trailer connections are required to have safety chains.
view full answer... - Will a Gen-Y Hitch 5th Wheel to Gooseneck Pin Box Work w/ a Recessed Gooseneck Box?Yes, it will as long as the opening around the the gooseneck ball is large enough that the pin can be inserted. The end of the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item # GY38GR is 3-1/2" x 3-1/4". You will need to have at least 5" of clearance around the ball to be good. The Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item # GY38GR is built to replace the Lippert Rhino pin box. It has a towing capacity of 21,000 lbs and a maximum tongue weight capacity of 3,500 lbs. You will also...
view full answer... - Recommended Gen-Y Pin Box for a 5th Wheel Trailer w/ a Rhino BoxThanks for the information! I just spoke with my rep at Lippert and your 2023 Alliance 24RK 5th Wheel Trailer has a Rhino-Box. To replace it you will need the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item # GY98GR. The Gen-Y gooseneck pin boxes do not include the legally required safety chains. You will also need the Safety Chain with 2 Hooks for Gen-Y 5th Wheel to Gooseneck Pin Box item # GY49GR. These are 84" long, have a 26,000 lbs capacity, and mount to the side of the Gen-Y pin boxes.
view full answer... - Gen-Y Hitch 5th Wheel to Gooseneck Pin Box For a 2005 Keystone Raptor 3512 5TH Wheel Toy HaulerTo confirm that the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box # GY58GR is the correct fit for your 2005 Keystone Raptor 3512 5th wheel toy hauler you will need to confirm the pin box on your Raptor. There are 3 ways to confirm the correct pin box. The first is by looking at the tag on your pin box, this will help you confirm that you have a 1621. The second is by finding the Lippert frame tag and I can confirm the pin box bolt pattern through Lippert. Finally you can measure the mounting...
view full answer... - Recommended Gen-Y 5th Wheel to Gooseneck Pin Box for a Lippert Turning Point Thanks for the pictures! To replace your Curt Turning Point you will want the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item # GY48GR. This was made specifically to replace the Turning Point pin boxes. You will also need the Safety Chain with 2 Hooks for Gen-Y 5th Wheel to Gooseneck Pin Box item # GY49GR. These are legally required when towing with a gooseneck connection and none of the gooseneck pin boxes include them.
view full answer...
- Recommended 5th Wheel to Gooseneck Adapter for a 1621 Pin BoxThanks for the picture! That is exactly what I need to confirm what pin box your Forest River Shasta Phoenix 28RB has. I just spoke with my rep at Lippert and you have a 1621 pin box with an 18,000 lbs capacity. You will want the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item # GY58GR you were looking at. You will also need the Safety Chain with 2 Hooks item # GY49GR. These are designed specifically to work with Gen-Y pin boxes. They are legally required and do not come with the pin box. Please...
view full answer...
- Recommended Gooseneck Pin Box for a 2024 Keystone Cougar 5th Wheel TrailerThanks for the pictures and information! I just heard back from my contact at Lippert and your 2024 Keystone Cougar has a 1621 pinbox. You will need the Gen-Y Hitch 5th Wheel to Gooseneck Pin Box item # GY58GR you were looking at. You will also need the Safety Chain with 2 Hooks for Gen-Y 5th Wheel to Gooseneck Pin Box item # GY49GR. Safety chains are required by law when towing with a gooseneck hitch and none of the 5th wheel to gooseneck pin boxes include them.
view full answer...
- Correct Pin Box to Replace a Turning PointThere is only one option to replace a Lippert, which is now Curt, Turning Point. You will want the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item # GY48GR. As far as make and model goes. 5th wheel trailer pin boxes are not model specific. The manufacturer's can install different pin boxes with different patterns for the same make and model years. This can be due to parts availability or customer specifications. With the exception of the Turning Point, the only way to confirm...
view full answer... - Recommended Gooseneck Pin Box to Replace a Lippert Rhino w/ a 5,250 lbs Tongue Weight CapacityThanks for all of the pictures! That is exactly the information I needed. To replace the Rhino Box on your 2023 Grand Designs Momentum, I recommend the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item # GY23GR. This gooseneck adapter has a 5,500 lbs tongue weight capacity and a 25,000 lbs towing capacity. You will also need the Safety Chain with 2 Hooks for Gen-Y 5th Wheel to Gooseneck Pin Box item # GY49GR. These are not included with any of the gooseneck adapters and...
view full answer...
Do you have a question about this Trailer Safety Chain?
Info for this part was:
Edited by:
Lindsey S
Video Edited:
Jacob T
Written by:
Mike S
Installed by:
Aidan B
Installed by:
Andy C
Video by:
John S
Updated by:
Manda E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jeffrey
3/10/2024
Work as they should , no issues.