CE Smith Universal-Fit Split Panel Brackets for Boat Trailers - Galvanized Steel - 1 Pair
(48 reviews)
Price: $19.55
In Stock
CE Smith Universal-Fit Split Panel Brackets for Boat Trailers - Galvanized Steel - 1 Pair
Item # CE10500G
Retail:$28.85
Our Price: $19.55
You Save: 32%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (48)
- Q & A (0)
- Photos
CE Smith Boat Trailer Parts - CE10500G
- Rollers
- Roller Bracket
- Galvanized Steel
- CE Smith
These split roller brackets brace any size roller on your boat trailer. They come in handy in areas where a one-piece bracket will not fit. They feature corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.
Features:
- Right- and left-hand brackets support a roller on your boat trailer
- Fit any length roller that has 5/8" diameter shaft
- Sturdy, 11-gauge, galvanized steel construction resists corrosion
- 6 Gussets provide extra strength by stiffening the bends
- Slotted mounting holes allow you to adjust the position during installation
- Made in the USA
Specs:
- Quantity: 1 pair
- Application: 4", 5", 8", 10", 12" and 18" long rollers
- Requires 5/8" diameter roller shaft
- Dimensions of mounting slots (each): 1/2" wide x 5" tall
These split panel brackets mount upright to a trailer's crossmember. They support a keel roller or spool roller to help keep the boat moving while it is being loaded and to stabilize the keel.
Galvanized Steel
Galvanized steel parts are hot-dipped in zinc after being stamped. This creates a coating that is typically 3 mil to 5 mil thick. This thick, all-around coating allows galvanized steel products to provide years of use without rusting or corroding.
10500G 11-Gauge, Galvanized Steel Split Replacement Panel Brackets - Universal Fit - QTY 2
California residents: click here
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Did not arrive in time
- Wrong item was ordered
Customer Reviews
CE Smith Universal-Fit Split Panel Brackets for Boat Trailers - Galvanized Steel - 1 Pair - CE10500G
Average Customer Rating: 4.7 out of 5 stars (48 Customer Reviews)
These split roller brackets brace any size roller on your boat trailer. They come in handy in areas where a one-piece bracket will not fit. They feature corrosion-resistant, galvanized steel construction and slotted mounting holes for adjustability.by: Theodore05/26/2020
Good product. No issues. I got it together with the roller and the roller shaft.
by: Richard05/17/2018
Utilized several products purchased from etrailer while building a double trailer for two sneak boxes. etrailer always had the products I needed in stock, delivery was prompt and their service/follow up was excellent. I will not hesitate to continue to purchase from them in the future.
by: Harry12/30/2017
As always fast delivery. Good quality and made installation of roller easy.
by: Gary08/14/2023
Etrailer always has what I need at any time I go to work on all of my equipment Thanks very much
by: Robert 11/28/2023
Did exactly what I needed it to do.
by: Scott06/25/2019
Just installed. Was as advertised. Perfect for what I needed. Note, there is a rise from the bolt slot to the roller location. My old one had less of a rise. Will trailer this weekend and update if I have issues
Scott
6/26/2020
Holding up well
by: Tim R.09/02/2019
These brackets were used for axels of rollers on my boat trailer. They effectively replaced ones that had rusted out. With the long openings they didn't require new holes. The brackets themselves are strong enough to support my 19-foot fiberglass boat.
by: Loren C.09/16/2013
I am building a ramp for my kayaks so that I can load and unload them from the water directly into my storage area under my house. The split panel brackets allowed me to buy the precise size rollers I wanted, and made installation very easy. The brackets are high quality and were as advertised. Best of all, the level of service I received exceeded my expectations. The product arrived ahead of schedule.
by: VJ09/29/2016
The product was just what I was looking for and at about half the cost including shipping. etrailer.com shipped my order the next day. Everything was great until USPS got ahold of it. It took 5 days to receive it once it reach my local post office. Go UPS all the way.
by: John d10/22/2016
Great product. Allows flexibility in mounting rollers. Prompt delivery
by: Paul02/07/2021
Received order with one item short. etrailer immediately corrected the problem and shipped me the missing parts.
by: Richard05/06/2022
look strong enough to do the job. I had to file a manufacturing irregularity out of one of the roller axle holes to make the roller pin fit
by: Fred 12/28/2022
Excellent, the hot dip galvanizing is really heavy and will outlast me.
by: Marshall D.08/10/2017
added a roller to boat trailer middle cross member worked great
by: David03/12/2020
I couldn't believe how quick the order came. Excellent condition and great quality parts. Thanks you etrailer.
by: Reg10/19/2016
Sturdy, look like they will last. Love etrailer service
by: Richard07/28/2018
Well made .
Richard
7/28/2019
These brackets were used in salt water until I sold the boat and trailer. They were holding up very well.
by: David07/10/2018
Heavy zinc coating and heavy duty metal...... very satisfied.
by: Shawn05/29/2016
Received on time and for the best price to be found.
by: Earl steuck03/04/2017
Product arrived as stated and will do the job I ordered it for..thinking of ordering a second
by: Chris Calderbank04/21/2015
As expected, designed for lighter work than heavy.
by: danny09/12/2016
not expensive, not quite as thick metal as you would like
by: Barry11/07/2017
Just as I wanted
by: Don H.04/15/2017
Looks great came very fast,when I need more parts I will start here.Thanks
by: Scott09/02/2020
just what I needed, fair price
25
48
Show More Reviews
See what our Experts say about this CE Smith Boat Trailer Parts
- What is the Widest Keel Roller for a Boat TrailerThanks for reaching out, Michael! The widest roller we have is the 18" Long Yates Keel Roller for Boat Trailers # YR18244-165EC which installs on a trailer using the CE Smith Universal-Fit Split Panel Brackets # CE10500G, the 19" Roller Shaft w/Cap Nuts # 107-30A, and either bolting into the trailer frame or around it with U-Bolts. Since I'm not sure what the size of your frame is I've gone ahead and added a link to our U-Bolt kit selection for you to filter through, but I'd be more than...
view full answer... - Recommended Bracket and Roller Shaft For Yates Side Guide Roller 12 Inches LongThe Yates Side Guide Roller for Boat Trailers - Heavy-Duty Rubber - 12" Long - 1/2" Shaft # YR12243-4P is compatible with the CE Smith Side Angle Mounting Brackets for Boat Trailer Rollers - Galvanized Steel - 1 Pair # CE10211G. Then you may be able to use the Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 12-3/4" x 1/2" # CE10705A although it doesn't give much space. A better option is to use the Yates Side Guide Roller for Boat Trailers - Heavy-Duty Rubber...
view full answer... - Recommended 12" Flat Roller for Boat TrailerThe roller I recommend for a flat hull boat is the Yates Side Guide Roller for Boat Trailers part # YR12243-4P which measures 12" long and can be used with the Roller Shaft with Pal Nuts for Boat Trailer Rollers part # CE10705A. We also have the CE Smith Universal-Fit Split Panel Brackets part # CE10500G.
view full answer... - Recommended Keel Roller For Best Weight Capacity on Boat TrailerThe Yates Keel Roller for Boat Trailers - Super-Heavy-Duty Rubber - 18" Long - 5/8" Shaft # YR18244-165EC is not weight rated. The weight of the boat will actually be on the bracket and the 5/8 inch shaft that runs through the heavy-duty roller. Your application with the front weight the roller is more likely to bend the longer you make the roller. For instance the 18 inch roller along with the brackets # CE10500G and Roller Shaft w/Cap Nuts 19" x 5/8" # 107-30A will be more likely...
view full answer... - How to Prevent Metal Bow Roller Brackets from Contacting the BoatAlmost all bow roller assemblies have an industry standard hardness of 85a durometers. I was able to call my contact at Yates to confirm this. I do have a solution for you but we do not have any bow rollers with a hardness rating greater than 85a durometers at this time. However, I believe the problem you are experiencing can be eliminated using a wider roller as this would in turn dissipate the weight more evenly to minimize contact with the metal brackets. I recommend using the Bow...
view full answer... - Is Boat Trailer Roller Bracket Available For Rollers That Use 5/8 Inch ShaftThe Side Angle Mounting Brackets for Boat Trailer Rollers, part # CE10211G, you referenced have a 3/8 inch hole used for attaching boat trailer roller shafts. Drilling the hole out on this bracket could compromise the integrity of the bracket and would not be recommended. We do have brackets that may work for you if you have the mounting space available. They are part # CE10500G. The mounting slots on these brackets are 1/2 in wide x 5 in tall.
view full answer... - Does The CE Smith Keel Roller Come with Shaft and Pal Nuts?The CE Smith Keel Roller for Boat Trailers - PVC - 10" Long - 5/8" Shaft - Amber # CE29518 does not come with the shaft and pal nuts. I recommend using the Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel - 11" x 5/8" # CE10726A for those components and then you can use a bracket like # CE10500G.
view full answer... - How To Add Self-Centering Rollers To Shorelandr Boat TrailerIn order to install the CE Smith Keel Roller for Boat Trailers part # CE29505 on a trailer you will first need the Roller Shaft with Pal Nuts for Boat Trailer Rollers part # CE10727A. Then, all you need is a set of mounting brackets such as the CE Smith Universal-Fit Split Panel Brackets part # CE10500G and u-bolts. The correct u-bolts will come down to frame size. I have linked our selection for you. The roller will install in the center of the trailer on the horizontal crossmember.
view full answer...
- Parts Needed To Add Keel Roller to Boat Trailer with V-PadThe Yates Keel Roller for Boat Trailers part # YR1200B is just what you are looking for. It's blue in color and has the roller design you are looking to add which will assist in centering the boat on the trailer. In order to install this you will need the Roller Shaft with Pal Nuts part # CE10727A and CE Smith Universal-Fit Split Panel Brackets part # CE10500G. The u-bolts you have now can be reused.
view full answer...
- Parts Needed to Install the 12" CE Smith Self Centering Keel RollerHey Manuel, thanks for reaching out! In order to install the 12" CE Smith Keel Roller for Boat Trailers - Self Centering # CE29505 you'll need the Roller Shaft with Pal Nuts # CE10727A along with the mounting bracket kit # CE10305G or # CE10500G. I took a look at our U-Bolt kits and none of them will fit a 3-1/2" square tube so you'll need to source those locally.
view full answer... - 12 Inch Keel Roller And BracketThe U-shaped bracket is not something we carry, but we do have a much stronger assembly for the keel roller. I recommend using the CE Smith Deep V Keel Roller Assembly for Boat Trailers - Galvanized Steel/Black Rubber - 12" # CE10405G for a complete mount and roller. We also have the CE Smith Universal-Fit Split Panel Brackets for Boat Trailers - Galvanized Steel - 1 Pair # CE10500G which can be used with the Roller Shaft with Pal Nuts for Boat Trailer Rollers - Zinc-Plated Steel -...
view full answer... - Keel Roller Bracket Recommendation with 1/2 inch Wide Mounting SlotsThe slots for the mounting bolts on the CE Smith Universal-Fit Split Panel Brackets # CE10500G are 1/2 inch wide by 5 inches tall. Because of that this would fit what you need since it is also designed for a 5/8 inch shaft.
view full answer... - How to Make 18 inch Keel Roller BracketWe have what you would need to make a roller bracket for the 18 inch keel roller part # YR18244-165EC. For that you would need the roller part # 107-30A and then the universal brackets # CE10500G.
view full answer... - Parts Needed To Add 12" Self Centering Keel Roller On Boat TrailerYou could use the CE Smith Keel Roller for Boat Trailers - Self Centering - PVC - 12" - 5/8" Shaft - Amber but you would need to have new brackets welded on to your 2015 EZ loader boat trailer, or you could drill new holes so you can bolt on the CE Smith Universal-Fit Split Panel Brackets for Boat Trailers # CE10500G. This mounting slots on this bracket should only be roughly 11" apart so you will not be able to reuse your existing holes. You would also need a new, longer roller shaft #...
view full answer...
Do you have a question about this Boat Trailer Part?
Info for this part was:
Expert Research:
Jameson C
Written by:
David L
Installed by:
Cole B
Updated by:
Wilson B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Theodore
5/27/2021
Works great no problems