Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Coupler repair kit for 2" posi-lock coupler latch for Curt straight tongue couplers.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hello, everybody, this is Jeff at etrailer.com. Today, we're going to take a look at this Curt coupler repair kit for the Curt 2" Posi-Lock coupler latches. Now, this kit here will let you replace a broken coupler latch on the Curt Posi-Lock couplers that fit the 2" hitch balls. You can see, there's your latch. That's how you would open it. That's how you lock it.
But just to give you an idea, there's the Curt Posi-Lock couplers that this latch will fit on. If you happen to have a damaged one or a broken one, you can repair it or replace it with this one. Does include the spring nut and the Posi-Lock mechanism, allows for a nice easy adjustment of your connection. And, if you notice, it does have a hole right here, so it will accept a coupler lock that has a pin diameter of up to a quarter of an inch. This is a high strength steel, has a nice sink plate finish on it for corrosion resistance.
But, that should do it for the review on this Curt coupler repair kit for the Curt 2" Posi-Lock coupler latches..
Average Customer Rating: 4.9 out of 5 stars (225 Customer Reviews)
Coupler repair kit for 2" posi-lock coupler latch for Curt straight tongue couplers.not only it didn't fit as advertised but the return freight was almost the cost of the part. now i have a useless paper weight.
I had a coupler with a bent latch, I thought I would have to replace the entire unit, then I found the repair page for couplers, I compared the parts and bought this one, it is a exact match to my coupler that is not branded. It took 3 minutes to install and adjust. When adjusting it I used a two in ball and tightened the nut on the repair part so it was snug with the ball in the coupler.
I needed to replace a 1985 (34 year old) Fulton Fas-Loc coupler and once again, etrailer had me covered. Easy order, fast ship and works as advertised! Great job!
This item made connecting a whole lot smoother. Once you get the tension set correctly on spring, it works great. Thanks E-Trailer
After searching around for a repair kit I found this one and nobody even comes close to beating the price of E-trailer.
It seems to be heavy duty haven't pulled the trailer with it yet.
I could not be happier. The install was a snap. Adjusting took minutes. The fit on my utility trailer was perfect. This was even better quality than the original, and given that my trailer was built circa 1980, that says a lot, as we were used to good products back then. Would gladly purchase again.
This product can help replace one that is worn out and difficult to latch anymore. The only problem we found was on the packaging, it said to follow instructions, yet there were no instructions. We figured it out though, as the old spring was severely past it's prime and through some old time country know how, we were able to get things to work. We were able to take our boat to the lake and bring it home again without problems after fixing it.
Shannon D.
6/18/2015
still working... no complaints
Haven’t installed yet
Locking mechanism where hook latches could be designed better. Snapper pins received were too large in diameter to slide into coupler handle hole. Service has always been excellent.
Heather A.
2/14/2019
This replacement latch for curt couplers will take up to a 1/4 inch diameter pin such as part # K-8P.
Helpful Links
My utility trailer had a hitch handle that someone left in the up position and like always i got stepped on and bent over a week before my camping trip. The local auto parts stores didnt have anything. I found a complete replacement kit to basically rebuild the hitch. Price was great and fast enough for me to get done before my trip. Its been amost a year and we have put a few thousand miles on the trailer since and everything is still working great. (And my friends borrow it a lot and there rough on stuff) i would buy from etrailer again.
The item shiped and arrived in two days. It looks great and will solve my problem.
My coupler lock broke so I could not use my utility trailer. This will give me the service of my trailer again. Thanks, the product is very sturdy and appears very durable.
William D.
9/29/2020
Eactly what I needed. Has worked very well. Good quality and excellent service.
First time ordering from etrailer and I am very pleased. The price was great, I got the exact part I ordered and needed which was easy to choose because of the product description and great pictures of the product. The part even showed up a day early, with an email telling me the product was delivered.
Matthew
1/24/2018
Product is still working and holding up to the abuse of teenage boys. Thank you
Installed in minutes, easy to adjust, still working great after 1 year, even though trailer is stored uncovered outside.
Timothy D.
2/6/2018
Good as new
This trailer 2 inch hitch Curt coupler repair kit was very easy to install , and worked great the shipping was fast and it was priced right E trailer is a great place to shop why go any where else. Joe L.
Accidently backed over trailer coupling and it broke. This part solved the problem. Shipping was fast and price was great.
James E.
7/9/2017
This product is still working great after a year since installed. Expecting many more years of use.
Product was exactly as shown/written. Customer service terrific. Watched demo(s) of installation and read reviews. Definitely want to watch a demo if you have never attempted before. Spring is stiff and not much room to wiggle fingers. Crawled under to put together but no way. Stood above ball hitch and compressed spring just a bit and put bolt head assembly slightly through spring enough to slip lower female end over ball hitch rod and bingo it was in. Took less then 5 minutes from beginning to end even with my trying on my back in the rocks. Definitely would buy from here again.
I had been to FIVE different stores looking for what I needed..None had a "straight tongue" or wanted me to replace the whole system. Found you online; seemed way too easy to find and order i.e.too good to be true. Part arrived today..2 days earlier than stated. Installed right away and was exactly what I needed for my 40 year old trailer.
Totally saved me. When I accidentally broke this part on my trailer I thought that I pretty well had ruined the trailer. Finding this part on here and for such a reasonable price and fast shipping was outstanding. It was an easy install and has served me well. Frankly it works much better than the original hardware. So I consider it an accidental happy upgrade. Thanks etrailer!
Easy to install. Strong as original. Would order another if I needed it.
I was very pleased to find a quick easy repair part for my small utility trailer hitch. Part fit perfectly, was relatively easy to replace, and the limited instructions were more than adequate.
There was no disappointment as to the quality of this item. It was heavy duty - in fact, it was heavier duty than the one it replaced. This installed fast and easy.
The additional locking washer underneath was a nice touch as now I can adjust the clamp pressure of the underjaw with a simple twist of the lever-lock on top.
The only drawback is that, as others have also mentioned, it does not come with any instructions. Not that its so hard to figure out but a simple diagram printed on the back of the cardboard insert would have made this a no-brainer to install. Without it I had to do a little fiddling with the parts and a little head-scratching. I know, I know - but in the 10 degree weather it made it longer than it had to be.
I did not use the underjaw as the old one seemed to be a better fit with the underjaw pivot pin - but I saved it just in case.
This cost a third less than other placed I shopped and a great buy all in all.
(But put a dang diagram though!)
The bolt part of the Lowes (Carry-On-Trailer made) utility trailer 1 7/8 coupler broke. I bought this 2" kit figuring it would have a thicker better bolt in the setup but everything in the kit was the exact same parts EXCEPT the shoe which I knew when ordered. The kit worked Flawlessly with the use of the OEM shoe.
When I broke this part on my trailer I thought I would have to buy a new hitch. Found the replacement part at etrailer and purchased it. The part arrived in short order and I installed on my trailer. It worked great. Great service, recommend to all.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Rob S.
1/8/2015
Still happy, still working very well. Will likely purchase from here again when I re-do the one on my popup camper.