Peterson Trailer Tail Light - 4 Function - Incandescent - Round - Red Lens - Driver Side
(153 reviews)
Price: $10.64
In Stock
Peterson Trailer Tail Light - 4 Function - Incandescent - Round - Red Lens - Driver Side
Item # 432000
Retail:$25.13
Our Price: $10.64
You Save: 58%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (153)
- Q & A (0)
- Photos
Peterson Trailer Lights - 432000
- Tail Lights
- Round
- Incandescent Light
- Red
- 3-3/4 Inch Diameter
- Surface Mount
- License Plate
- Stop/Turn/Tail
- Non-Submersible Lights
- Peterson
3-3/4" Round. Incandescent trailer light serves as a stop, tail, turn, and license plate light. Durable polycarbonate housing with screw-on lens. Stud mount with included studs. 2-Wire design grounds through mounting hardware. (1) 1157 Bulb.
Features:
- Combination trailer tail light serves 4 functions when properly mounted
- Stop light, tail light, turn signal light
- Built-in license plate light illuminates trailer's license plate
- Incandescent bulb can be easily replaced
- Durable polycarbonate housing with screw-on lens
- Red wrap-over lens covers incandescent bulb
- Compatible with 12V DC systems
- Stud mount with included 1/4" studs
- 2-Wire design with power leads - ground through mounting hardware
- DOT compliant
- Made in the USA
Specs:
- Configuration: driver side
- Passenger side: 431800 (sold separately)
- Dimensions: 3-3/4" diameter x 2-5/8" thick
- Distance between mounting studs (center on center): 2"
- Bulb type: 1157
- Power draw at 12.8V: 2.2 amps
- Wire length: 10"
- 1-Year limited warranty
M428 Peterson Trailer Combination Tail Light - Stop, Turn, Tail, License Plate - Incandescent - Round - Stud Mount - Red Lens - Driver Side
California residents: click here
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
Customer Reviews
Peterson Trailer Tail Light - 4 Function - Incandescent - Round - Red Lens - Driver Side - 432000
Average Customer Rating: 4.7 out of 5 stars (153 Customer Reviews)
3-3/4" Round. Incandescent trailer light serves as a stop, tail, turn, and license plate light. Durable polycarbonate housing with screw-on lens. Stud mount with included studs. 2-Wire design grounds through mounting hardware. (1) 1157 Bulb.by: Richard 04/28/2024
Perfect fit, exact replacement.
by: John 08/18/2023
I'm happy to be a customer of eTrailer. They have proven to be reliable and I am happy with the service, people, and quality of the items purchased. Great products used for our restoration of an old 20-foot boat trailer and a 7-foot utility trailer.
by: Lynnette07/13/2023
The wires come out of the back through a connector/nipple that protrudes and is the same length as the through bolts. It prevents mounting unless you drill an additional 1/2" hole in your steel frame.
by: Robert09/13/2021
Our old lights in the back of the 1976 Ford F100 wore out. These are almost a match. I couldn’t find any without the clear lens for license plate. Covered the lens with black tape. All good. Thanks. Great service fast delivery.
by: Perry 02/04/2024
Easy to change out
by: Rob L09/13/2016
Lights were exact replacement and just what I needed. Your website detail was helpful with installation.
by: Brad11/28/2019
Needed a quality light that I could use on a motorcycle bobber build; and this fit the project perfectly.
Thank You for your excellent service.
by: James04/08/2023
This light appears to be a direct replacement for my defective trailer light that fits into a round steel sleeve on my utility trailer. I appreciate etrailer's excellent product descriptions and helpful tips. Install should be a breeze.
by: Roger 05/31/2023
Great looking taillights
by: Clyde S.03/25/2016
The lights came in a very timely fashion. They were well packed. I replaced my 1965 camper trailer tail lights and these fit just right. The price was very competitive and since I had good results in a previous order, I went with etrailer again.
by: Stan R10/24/2013
Just received my 2 nd order, the first was fast and great condition. The lights were wrapped in plastic bags. Bright and shiny housings.This order had the tail lights wrapped in paper, they actually were terribly scratched and scuffed both of them, one did not include the 2 star washered nuts... My first thoughts were these were used. Disappointed , I called to voice my opinion. She thanked me for the call.
Too much trouble to return...hope they work when I get them installed.
Disappointed customer,
Stan
Charles P.
4/24/2015
Same thing just happened to me Stan. Ordered two replacements, left and right, and both arrived wrapped in paper with the left handed one scuffed, covered in what looks like road dust and a missing star washer nut.The other one, the right one, looked better but still not new.
by: Joe 09/10/2022
This trailer has been a real pain. Hard to find bearings and seals were nearly impossible The lighting enclosures border on stupid. I really appreciate you guys going the extra mile. You got my business. Thanks, Joe in Bend Oregon
by: Mike05/01/2018
Very pleased. Easy installation. The lights are bright with good reflectors and side marker lights and the price can't be beat.
Mike C.
5/1/2019
I made an excellent choice. Everything works well and has resisted the elements well. Very happy with this.
by: Dean07/22/2020
I got the round 431800 & 432000 for a 4x6 ft trailer. I had to mount them at 90 degrees from horizontal in order to light the license plate. The 432000 is designed for the license plate to be under the light. I sent an email to etrailer asking if they would let rain water in when mounted this way. They responded in about a week & said they would be fine. Well, they are not fine. Both will let rain water in when mounted this way as the drain hole is now on the side instead of bottom! I tried to caulk the holes, but caulk does not stick to the plastic. I used tape inside the housing with caulk sticking to it. Not sure how well that will work. I drilled new drain holes in the bottom. I replaced the lens screws with SS ones. I kept these only because I could not find anyone else selling them. They work, but my old ones had the clear lens welded to the housing and could be mounted anyway. These are cheap and the clear lens is snapped in with lots of gaps for water to come in. Not real happy with the results.
by: Simon D12/20/2016
Broke the factory taillights on my 2003 Kawasaki Mule. They are 90 plus bucks each from Kawasaki...Ouch! I bought two of these and they were shipped all for under xx bucks! They fit perfectly, do what they are intended for and look great on my mule. Thanks E Trailer!
Simon D.
12/20/2017
Still working great, I havent managed to back into anything :D
by: Clayborn B03/12/2017
The products were acceptable quality and the customer service was UNEQUALED, EXEMPLARY, GREAT, etc.
The trailer overhaul job went well and we hauled a capacity load almost 1500 miles in some difficult road conditions, stopping only for fuel and to sleep.
We'll use your products again.
by: Mark 07/26/2023
Looks good. Exactly what I ordered. Haven’t installed it yet
by: Stan05/02/2016
Good quality light fixtures - exactly what I needed.
Quick shipping, good communication.
I will not hesitate to recommend etrailer.com to friends and relatives.
Stan
1/31/2018
Thanks for the note... all is well with the products I bought from you folks!
by: Jay 08/31/2023
Awesome!!!!
by: John07/13/2016
I have purchased numerous items from etrailer over the last several years and their service and quality has been outstanding. The prices are always reasonable and shipping quick. Very nice to deal with.
John
7/13/2017
The lights are working just fine. Great product.
by: Peter09/10/2020
There work great! I used them to require and older sailboat trailer that has two license plate lights, one for the plate, the other to illuminate to boat to not startle people at night.
by: Heath04/15/2021
I put this on a classic Holsclaw motorcycle trailer. I felt it was the closest representation of the lights that came with the trailer and this brand was recommended to me by an enthusiast group that loves these old trailers. I was very happy to see that etrailer carried this brand. Even though I live close to the warehouse, I had these shipped and they arrived quickly. These are well made, durable and so far have worked flawlessly.
by: Carl09/05/2019
this is an inexpensive light that was originally used on pull behind trailers. It is smaller OD than usual, because people used tom put them inside steel pipe to protect them. With the advent of low profile leds, this lights usage has declined. etrailer has it in stock at a reasonable price and good quality. these lights are most often sold when someone wants to match their old style, or put back inside a steel pipe.
by: Roger C.06/04/2020
These lights are great trailer lights. Classic .
I actually bought these for my 1955 international harvester r110 pickup. It is very close to what came on them from the factory. I hope that they dont change anything about them unless it is to go back to a 50s or 60s quality.
by: Robert09/18/2021
I purchased trailer lighting for my flatbed trailer. Very satisfied with the parts and the service I received. Will use you again when the need arises.
25
153
Show More Reviews
See what our Experts say about this Peterson Trailer Lights
- Can Peterson Round Left Side Trailer Light Part 43200 Be Used On Right Side of TrailerThe item you selected, Peterson Round Trailer Tail Light with License Plate Light, 2 Stud Mounting, Left Hand, part # 432000, is designed for use on the left hand side of the trailer because it has an integrated light for the license plate on your trailer. The matching right side light is Peterson Round Trailer Tail Light, 2 Stud Mounting, Right Hand, part # 431800, which does not have the integrated license plate light. You could mount part # 432000 and 431800 on either side of the trailer,...
view full answer... - What is the Peterson Round Trailer Tail Light Part # 431800 and # 432000 Constructed Of The housing of the Peterson Round Trailer Tail Light with License Plate Light, 2 Stud Mounting, Left Hand, item # 432000, and right side, item # 431800, is plastic. At this time we do not have a round surface mount light that has a metal housing.
view full answer... - Availability of Driver Side Peterson Round Tail Light With License Plate LightYes, we do. The Peterson Trailer Tail Light # 432000 is what you're looking for. This has the built-in license plate light and will pair with the # 431800. There is no set available so you will need to order each light individually.
view full answer... - Can Peterson Round Trailer Tail Light Be Mounted Turned 90 DegreesThe Peterson trailer tail light # 431800 does have a top and bottom, indicated on the back of the light. Normally a light does have to be mounted a certain way because otherwise the light being emitted may not be visible the way it is supposed to be as it exits the lens. But on this light I do not see that as an issue. Ideally though using an additional bracket as shown in the linked video would be the way to go. The left hand side matching light, # 432000, is a different story. It has...
view full answer...
- Passenger Side Tail Light to Match Peterson Round Trailer Tail Light # 432000The passenger side of the Peterson Round Trailer Tail Light # 432000 that you referenced is part # 431800 on our site. The only difference between them is that the driver's side has the license plate light on it. If you are going to be mounting the license plate below the light you can use either the steel bracket # 428-09 or the plastic bracket # 440-09.
view full answer... - Trailer Light Kit with Tail Lights and Wiring HarnessWe have several different tail light kits which I have linked for you but none of them use Peterson Round Trailer Tail Light # 432000. You could get one of light # 432000, one of # 431800, and a 4-Way flat wiring harness, # A35W42B. You would just need some wiring components such as # HM51020 to make the connections and secure the wiring to the frame.
view full answer... - Is there a Trailer Tail Light that Matches Peterson Back Up Light # 411SCWe do not have an exact match for a red round tail light like the Peterson Back Up Light, # 411SC, that you have referenced that is a flange mount. The closest flange mounted lights are going to be the Peterson round tail lights # 431800 and # 432000. For a flush mounted light, you could use # 429800 which may be more what you are looking for. We also have the Optronics brand flange mounts # STL42RB or # ST47RB. They use wiring harness # A45PB.
view full answer... - LED Version of Peterson Trailer Trailer Taillight 43200We have square trailer LED taillights like the part # 271585 for the left and # 271584 which mount with the same 2 inch apart stud dimension like you are looking for. This would be a great solution as long as you are okay with changing the light shape.
view full answer... - Replacement Tail Lights For a 1965 Selma 4 X 6 Utility TrailerBased on your images it appears you have the Peterson Driver # 432000 and Passenger # 431800 lights currently on your 1965 Selma utility trailer. If you prefer something different the LED Trailer Tail Light # STL413RFHXB would be a good option with a 4" diameter.
view full answer...
- Replacement Round Tail Light For Kit Car With Obsolete 3-7/8" Diameter Tail LightsIt would appear those lights and lenses are obsolete. We do have the Peterson Tail Light # 432000 which has a similar design to your lights. This light is 3-3/4" in diameter, 2-5/8" thick and the mounting studs are 2" on center. If this lens were to break you can still get a Replacement Lens # 420-15.
view full answer... - Peterson Round Trailer Tail Light Wire ConnectionsYou are correct. The wires on the Peterson Round Trailer Tail Light with License Plate Light, part # 432000, are as follows. The brown wire is the running light circuit and the red wire is the stop and turn signal circuit. The light gets grounded through the mounting bolts to the trailer frame so it will need to be mounted to a metal surface connected to the trailer frame.
view full answer... - Availability of LED Trailer Taillights That Can Replace 432000 and 431800We have LED trailer taillights that have the same 2 inches between the mounting studs like with the part # STL9RB for the driver side or part # STL8RB for the passenger side but we do not have LED versions of the # 432000 and # 431800.
view full answer... - Diameter of Peterson Round Trailer Tail LightThe Peterson Trailer Tail Light - Stop, Turn, Tail - Incandescent - Round - Red Lens - Passenger Side # 431800 and driver's side # 432000 are 3-3/4 inches diameter as you can see in the attached video. The fitguide simply puts 4 inches as the closest option as they often are rounded up in size to the closest fit. We do measure each product and the specific measurements are 3-3/4" diameter x 2-5/8" deep with mounting studs 2 inches on center.
view full answer...
- Replacement Tail Lights For RV Motorhome With 3-1/2" Diameter Tail LightsThank you for the images. It appears you have the Peterson Trailer Tail Light # 432000 on your motorhome. We do have a replacement Lens # 420-15 if only the lens needs replaced. I do not see that we currently have a replacement lens for the reverse light but you may be able to use the LED Light # UCL09CB which is 3-1/4" in diameter. You may need to create a custom spacer since this LED light is much thinner than the incandescent you would be replacing. .
view full answer...
- Will the Peterson Round Red Trailer Tail Light Bracket 510-9 Work with Jeep Style Tail LightsThe Replacement Bracket for Peterson Round Red Trailer Tail Light part # 510-9 is designed to be used with the Peterson Round Trailer Tail Light part # 432000 for left hand or part # 431800 for right hand. In order to determine whether or not it will work with your Jeep style tail lights you would need to measure the distance between your mounting studs and then compare them to the dimensional drawing I have attached for you on the above bracket. I have attached a list of our other trailer...
view full answer...
- Upgrading Vintage Trailer from 6 Volt to 12 Volt Lighting SystemIn this case I recommend upgrading the lighting on your vintage trailer to lights designed for a 12 volt system. I have included a link to our trailer lighting for you. One of my favorites that has a vintage kind of look is the Peterson Round Trailer Tail Light, # 432000 for left hand side and # 431800 for right hand side. Unfortunately we do not offer a product that will convert the 12 volt system on your truck to a 6 volt system for your trailer.
view full answer... - Traditional Designed 4 Inch LED Trailer TaillightAlthough none of our suppliers offers a lamp like the # 432000 you specified in an LED version, we do offer a traditional design stud mounted LED lamp that could work for you. I'd recommend the # STL008RB for the passenger and # STL009RB for the driver side. The lamps are a bit larger, at just about 5 x 4-1/2 inches x 3 inches deep. If you have the space available, these lamps would be a good choice. I've linked to a demonstration video you might find helpful.
view full answer... - Right Side Signal/Flasher Lights on Trailer Do Not Function After 4-Pole InstallationThe best way to troubleshoot your issue is to disconnect the trailer and test the 4-pole on the vehicle to ensure it is working properly independent of the trailer. You will need a circuit tester like # PTW2993 to test the contacts on the 4-pole one by one while a helper activates the various functions on the vehicle. If the Rogue's wiring exhibits proper performance for all functions, then you know the issue is on the trailer side. If not, you should contact your dealership. You can still...
view full answer... - Replacement Trailer Tail Lights for River Drift Boat TrailerThe Peterson Round Trailer Tail Light, 2 Stud Mounting, Right Hand # 431800 and # 432000 or the 4-3/8" Round Trailer Tail Light, Stud Mount, 3-Function, Right Hand # ST24RB and # ST25RB are both the style you are seeking but are not submersible. They are good for weather, but not for launching a boat as you referenced. I have linked the page to your options for a round light that is submersible but they won't have the 2 stud mount your referenced.
view full answer...
- Are Driver and Passenger Side Peterson Trailer Tail Lights DifferentThat's a good question, but different tail lights are needed for the driver and passenger side for trailers, including the Peterson lights you asked about. The reason they are marked as "Driver Side" and "Passenger Side" is because the drivers side light has a bulb underneath which illuminates the license plate, as shown in the accompanying photo. So the lights you need are: - Driver Side: Peterson Trailer Tail Light # 432000 - Passenger Side: Peterson Trailer Tail Light # 431800 I...
view full answer...
- LED 1157 Light Bulbs For Converting Peterson Trailer Tail Lights 432000 & 431800 From Incandescent I recommend replacing your Incandescent Bulbs # DI79VR on your Peterson Tail Lights # 432000 & # 431800 with LED Bulbs # CM93236. There is currently not a LED light that will bolt in place of your current Lens # 420-15 on your tail lights. These LED bulbs have a 2,000 hour bulb life.
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Updated by:
Adele M
Updated by:
Laura H
Updated by:
Brian T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Clyde S.
2/20/2018
Great follow up, Laura.The lights were just like the original ones on my trailer. Installed easily and worked the first try. I wanted to keep my 1965 Bethany camper as original as possible and these lights did the job.