Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW
(753 reviews)
Price: $324.40
In Stock
Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW
Item # C17052
Retail:$501.95
Our Price: $324.40
You Save: $177.55
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (753)
- Q & A (0)
- Photos
CURT Weight Distribution Hitch - C17052
- 900 lbs
- Fits 2 Inch Hitch
- WD Only
- CURT
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- No Sway
This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately.
Features:
- Evenly distributes weight over axles of tow vehicle and trailer for improved stability and control
- Creates a more level ride for both tow vehicle and trailer
- Round spring bars are constructed of solid, forged steel for strength and durability
- Adjustable spring bar tension - just switch links in lift chains to fine-tune
- Desired tilt is achieved with traditional washer design
- Add or remove washers from spacer rivet to tilt head up or down
- Grease zerks in the head assembly make for simple maintenance
- Powder coated steel resists corrosion
- Snap-up lever eases hookup by reducing lifting required by trailer jack
- System includes head assembly, adjustable shank, spring bars, lift brackets and chains, snap-up handle, pin and clip, and all necessary hardware
- Hitch ball sold separately - requires 1-1/4" diameter shank
Specs:
- Tongue weight: 800 lbs - 1,000 lbs
- Maximum gross towing weight: 10,000 lbs
- Application: 2" x 2" trailer hitch receivers rated for use with weight distribution systems
- Shank length: 12"
- Maximum rise: 6"
- Maximum drop: 2-1/2"
- 1-Year limited warranty
| Included w/ System | Required - Sold Separately | Optional Add-Ons |
|---|---|---|
|
|
|
Create a more stable ride for your tow vehicle and trailer with a weight distribution hitch. Adding spring bars to your towing system applies leverage, which transfers the load that is pushing down on the rear of your vehicle to all the axles on both your tow vehicle and your trailer, resulting in an even distribution of weight throughout. The result is a smooth, level ride, as well as the ability to tow the maximum capacity of your hitch.
Selecting a Weight Distribution System
The tongue weight rating is the most important factor in determining which size weight distribution system you should use. If the bars of the system you choose are rated too high for your setup, they will create a rigid ride, which can result in a bouncing trailer. If, on the other hand, the bars are not rated high enough, the system will be unable to properly distribute the weight, rendering it virtually useless.
To determine the proper weight rating for a weight distribution system, you must first determine your trailer's tongue weight. Then add to that the weight of the cargo behind the rear axle of your tow vehicle. These two measurements make up the tongue weight rating for a weight distribution system.
Forged Steel Spring Bars
The round spring bars are made from forged steel, giving them a distinct advantage over typical cast steel bars. Forging is a process where thermal and mechanical energy are applied to the steel, resulting in a finished product that is more resilient to impacts and is stronger in terms of shear strength. Simply put, these spring bars do a superior job of helping to hold your trailer in line because of their added strength and durability.
Built-In Grease Zerks
The system's head features 2 built-in grease zerks so that you can easily lubricate the spring bars without having to remove them from the head assembly. The grease zerks are located on each of the shafts that encase the spring bars. Simply use a grease gun (sold separately) to inject grease into each of the zerks.
17052 Curt MV Round Bar Weight Distribution Hitch
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Arrived Damaged
- Package not accepted
- etrailer mistake
Customer Reviews
Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW - C17052
Average Customer Rating: 4.6 out of 5 stars (753 Customer Reviews)
This weight distribution system will help to evenly distribute the load over the axles of both your tow vehicle and trailer for a smooth, controlled ride. Includes round, forged steel spring bars and an adjustable shank. Hitch ball sold separately.by: Brian 04/25/2024
Bought used from etrailer. Quick ship, free ship, good price. Haven't installed yet. This unit is HEAVY DUTY.
by: Rusty04/06/2023
I can't speak on the product performance as I haven't hooked it up just yet. It was delivered a few hours ago and it arrived with a damaged box (basically split in half, I'm guessing since it was so heavy). I understand this won't affect it's performance but when you buy something brand new, you expect it fully painted without damage. I really don't want to fool with sending it back. I will attach some pictures with this review. Consider it a heads up when purchasing.
by: Bryant 01/30/2023
This works amazing! The price was the best and it was in stock.
by: David 08/07/2023
E trailer was very professional to deal with after a couple of delivery hiccups(UPS) issues. Took the camper out for it's maiden voyage and the System worked great! defiantly recommend this product and company.
by: Larry05/22/2022
Works great in tandem with sway control. Easy to adjust ride height for different tongue weights.
Larry
5/24/2023
Works great and easily adapts to various tongue weights.using wsway control.
by: Joe 08/10/2023
It came With no instructions, had to go online to find manual in order to set it up
by: Thom 04/17/2023
Prior Curt WD Hitch was stolen off my truck so ordered the same product again since I'm familiar with it. NO SURPRISES! Just as advertised, same quality I've come to expect from Curt. In the process of getting it put together and use for first trip of the season.
by: Vincent 03/25/2023
Well-made system that interchanged seamlessly with my last one. Delivery was prompt too.
by: Roger 05/20/2023
I love it mostly. Only problem is when I turn sharp it pinch my plug in cord. I have rerouted that so all is good now.
by: Peter09/14/2022
Replaced a fastaway e2 with this. This hitch does what it is supposed to and with built in plate for friction sway control ball mounts it can be used with almost any trailer. The hitch was very easy to setup and I have transferred it between multiple trucks and setting up each time to about 20 minutes tops. Good reliable hitch.
by: John05/09/2021
I installed this in less than an hour. Worked perfectly with my camper. Gave me a nice smooth ride. I'm very happy with this set up.
by: Larry EM05/06/2016
The equalizer hitch we purchased was more hitch than we needed to pull our ALiner, but we found that we were glad to have made this choice. We traveled though the Rocky Mountains, Oregon, Yellowstone Park and back home without any hint of problems. The hitch worked so well that we had little to no sway, went up mountain passes with ease, and were pleased with the weight distribution. We did have a learning curve on how to use the hitch, but we are novices on pulling anything. We found that it was very easy to use.
by: Lee j.09/15/2016
Easy to install . Distributes the weight like it's supposed to . Thank you
by: John04/02/2018
I have done business with etrailer for many years. Be it trailer hitches, tow bars, brake controlers, mirrors - the list goes on and on. Everytime I do a new transaction with them their service, attention to detail and customer satisfaction reinforces to me the rightness of my decision to only do business with them. I have no idea what I will need next but I do know UNEQUIVOCALLY it will be with them!
by: Everett 09/07/2022
.Ability to lube load bars is a plus. Load bars should be removed during difficult backing maneuvers.you
by: Shon08/23/2017
The weight distribution system is pretty much standard you should order a new ball with this item.
Heavy duty putting it together if you don't have a one inch drive socket set you might consider taking it and your truck to a RV service center for setting it up. I have a 6000 lbs trailer and an F-150 works great.
by: James05/31/2021
I haven't had a chance to use the Curt hitch yet, but the service I got from etrailer was fantastic!! They had information available to match my needs with the proper hitch system....AND delivery time was quick and exceeded my expectations!
by: Cody06/07/2019
Put this on my 2013 Silverado 1500 for towing a travel trailer. It took about 90 minutes to install and make the adjustments. Seems like a good product so far. It will enable me to tow a travel trailer that would have otherwise been too heavy to tow.
by: Bob10/08/2015
Two hours attempting to set this up and ultimately gave up and did not use it. It would not attach to my new trailer even with the pole tongue adapter. Worthless.
by: Kristine03/05/2023
I can’t find the pin to one of the arms.
by: Christopher11/03/2021
Does the job well, not really a system for someone who has lifting limitations.
by: Nate03/09/2017
The hitch and load bars are extremely well built and etrailers shipped it quickly. Very pleased with purchase.
by: Clay 01/03/2022
I will be making my living with this hitch and I trust Curt with all my hitch needs.
by: Joe05/26/2022
Hitch does what it is supposed to with out the cost of buying from somewhere else. etrailer is by far the best price anywhere
by: Donald 08/07/2020
Box was broken open, but all the parts where there.
Hitch looks well made , have not used it or assembled it yet, but I think it will work fine.
It is replacing my old hitch that has given me great service, but started giving me problems the last time I used it, it was 35 years old.
25
752
Show More Reviews
See what our Experts say about this CURT Weight Distribution Hitch
- Pole Tongue Adapter For Chain Style Hangers Weight Distribution Hitch SystemSince you are using a weight distribution system like the Curt MV Weight Distribution System # C17052 you will need a Reese Pole-Tongue Adapter # RP58393 that is designed for use with the chain style hangers. This has the structure to support the hanger. The Pole-Tongue Adapter for Equal-i-zer Weight Distribution Systems # EQ95-01-5950 is only compatible with Equal-i-zer and Fastway systems as they have the bolts for the sway bar brackets.
view full answer...
- Will a Curt Weight Distribution System Fit on a Trailer with an I-Beam FrameI-beam trailer frames present a bit of a problem when looking for weight distribution systems. It will work there is just a little bit of work that has to be done on the trailer for a system to work properly. To use Curt system # C17052 or a similar system you would need to have steel plates 5 or 6 inches wide welded to the trailer frame by an experienced welder in the area where the weight distribution brackets mount on the trailer. Basically the frame will have to be boxed in those...
view full answer... - Curt MV Weight Distribution System for a 5,000 lbs Trailer and a 1999 Dodge Ram 2500I would be happy to help you find a weight distribution system that will work with your 1999 Ram 2500 truck and travel trailer. I recommend the Curt MV Weight Distribution System item # C17050. Your tongue weight should be right around 10% of your trailer's total weight. This system has a tongue weight range of 500 lbs - 600 lbs and a maximum gross towing weight of 6,000 lbs so it will be perfect for your setup.
view full answer... - Can 1,000 lb Tongue Weight Curt MV Weight Distribution be Used Without Sway ControlYes, if you'd like you can forgo the friction sway control that is included with the Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 10K GTW, 1K TW # C17062. However, you'd be buying a portion of the kit that you wouldn't use, so a better option would be to buy this same system, but without the friction sway control part, which you can get with the following: - Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW # C17052 This is exactly...
view full answer... - Recommended Curt MV Weight Distribution System for Trailer with 425 Pound Tongue Weight If the loaded tongue weight of your Starcraft Avalon is around 425 pounds I recommend the Curt MV Weight Distribution System # C17050, which features a tongue weight capacity of 500 to 600 pounds. When adding any cargo weight you have stored behind the rear axle of your Silverado this will match up really nicely to your setup's total tongue weight and will work great to level out both your truck and the trailer. The only thing you will need to add is a compatible hitch ball like the 2...
view full answer... - Can You Back Up With Sway Control Bar Removed From Curt MV Weight Distribution System? You can back up with the Curt MV Weight Distribution System # C17052. This does not include any type of sway control. If you are referring to the Curt MV Weight Distribution System w/ Friction Sway Control # C17062 then you only need to remove the Sway Unit # 17200 to back up with the weight distribution bars still attached.
view full answer... - Is 10k Curt MV Weight Distribution Too Wide For V-Nose TrailerThe 10,000 lb Curt MV Weight Distribution System # C17052 isn't too wide for your trailer but it may be too long. A lot of times with V-nose trailers what ends up happening is you have to install Chain Hangers for Curt Weight Distribution Systems - Bolt On # C17005 on your trailer frame. The arms of the # C17052 are 31-1/2" long so you'll need about that much distance on your frame rearwards to use the system, otherwise you'll need to use the chain hangers. Then for a hitch ball use part...
view full answer... - How to Determine Tongue Weight of Trailer for Picking Out Weight Distribution SystemTo determine the tongue weight of your trailer when it is unloaded or loaded will require you to weigh it. For more info on that check out the link I attached. The tongue weight of a trailer isn't always listed. The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on weight distribution...
view full answer... - Solution for Needing Replacement Spring Bar for Pro Series Weight Distribution PS49903Unfortunately for you and your buddy (since he owes you) that system is no longer made and because of that the replacement spring bars were discontinued. We used to carry the part number as PS58441. The most similar system offered is the Curt MV part # C17052 which has a tongue weight range of 800-1,000 lbs.
view full answer... - Can Trailer be Backed Up With Curt MV Weight Distribution System InstalledThe Curt MV Weight Distribution System # C17052 does allow you to back up, however it doesn't include sway control with it. To add that you would need a friction sway control unit like the Curt # 17200 but by adding this you wouldn't be able to back up without initially disconnecting the friction sway control. If you are looking for a chain style weight distribution (WD) system then we have the Blue Ox SwayPro # BXW1006 which integrates the anti-sway so you don't have to worry about adding...
view full answer... - How To Determine If The Curt MV Weight Distribution Is Correct For a 5,400LB TrailerThe important thing to remember with the Curt MV Weight Distribution System # C17052 is while it is rated for a trailer up to 10,000lbs you need to stay within the tongue weight rating which is 800-1,000lbs for this hitch. If the tongue weight on your trailer falls in this window then there is no disadvantage to using this weight distribution on your trailer. For weight distribution if the bars are rated for more tongue weight than what you have you do risk transferring more weight onto...
view full answer... - Weight Distribution for 2020 Toyota Highlander Towing Trailer with 360 lb Dry Tongue WeightFor the tongue weight you mentioned of 360 lb dry the Curt weight distribution system # C17052 would be rated too high and would give you a pretty harsh ride quality. The # C17051 with it's range of 600 to 800 lbs would be a much better option once your trailer is loaded and would have a higher tongue weight.
view full answer... - Weight Distribution System that Allows For Bracket Placement 35 Inches Behind Hitch BallThe Curt Weight Distribution systems part # C17052 and C17002 brackets fit frames that are 2-3/4" wide so you will not have an issue with the brackets fitting your frame. Curt does not specify bracket placement for MV weight distribution systems however, the bars measure 30-5/8" long. The two Curt systems you mention also have a tongue weight range of 800 lbs-1,000 lbs which is very overrated for your setup with a 450 lb tongue weight. An overrated weight distribution system can cause a...
view full answer... - Shipping Weight of Curt MV Weight Distribution System # C17052The Curt MV Weight Distribution System # C17052 referenced in your question has a shipping weight of 87 pounds. If needed you can also open the box and have the individual components loaded into your truck for easier lifting. For example the head itself weighs just 15 pounds while the spring bars will weigh around 14 pounds each. I have attached the complete installation instructions too that you can show your mechanic ahead of time so he can take a look at the process.
view full answer... - Do Curt C17052 and C17057 Round Bar Weight Distribution Systems Use Same Weight Distribution HeadBoth the Curt # C17052 1000 lb system and the # C17057 1400 lb system use the same weight distribution head and ship with the same shank that offers a maximum rise of 6 inches or a drop of up to 2-1/2 inches. The # C17052 is recommended for trailers with a fully loaded tongue weight ranging from 800-1000 lbs. The # C17057 works with trailers with a loaded tongue weight between 1000-1400 lbs. You could purchase the # C17057 kit for the enclosed trailer, and for the camping trailer use...
view full answer... - Can 800 lb Spring Bars be Used With 1,000 lb Curt MV Weight DistributionSo long as the total tongue weight of your fully loaded 2022 Forest River Surveyor is between 600 lbs and 800 lbs, you can use the lower rated spring bars with the hitch head of your Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW # C17052. The MV systems all use the same hitch head, which is why different rated spring bars are compatible. Having said that, without knowing your loaded tongue weight, it's impossible for me to know specifically if new bars are...
view full answer... - Weight Distribution Hitch for 400-600 lbs and 800-1000 lbs Tongue WeightIf you choose a hitch that is too light for your application it will not be effective. If you choose a hitch that is too heavy, you'll suffer a rigid ride and a bouncy trailer. Ideally you want a system that has a tongue weight capacity where your tongue weight falls in the middle. Since you are renting different trailers, I would not recommend these Curt models. All of these require drilling in the frame in order to be installed. Instead, consider a system that uses clamp-on brackets....
view full answer... - Is Sway Control Needed with Weight Distribution System on Newer Ford Truck Weight distribution alone is basically a form of "sway control". It will help reduce sway caused by cross winds or passing semi-trucks greatly. Going with additional sway control isn't always needed and since you have a the Ford sway control built into the truck already I would assume you would be totally fine without a sway control system.
view full answer... - Using Curt MV Weight Distribution System C17052 on Vehicle With Auto-LevelingThe Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW # C17052 you have is rated correctly for your 6,850 lb loaded trailer, as your tongue weight should be right in the 800 lb - 1,000 lb range of the system. So I think the issue is with the auto-leveling air bag suspension not allowing the set up to be complete. For vehicles with an auto-level system, what you will need to do when setting up weight distribution is first connect your fully loaded trailer with...
view full answer... - Will The Curt Weight Distribution 17502 Work On Trailer With 950LBS Tongue Weight & Clear Tailgate? When using the Curt MV Weight Distribution System # C17052 or another weight distribution hitch you do not have to include the weight of the hitch in the tongue weight calculation for the trailer. So this hitch is rated for a trailer with 800-1,000lbs of tongue weight and total weight up to 10,000lbs. It is important to ensure the weight of the hitch and tongue weight of the trailer do not exceed the capabilities of the receiver or your 2022 Ford F-150. Your truck and receiver will have...
view full answer... - Replacement For 1,000 lb Pro Series Weight Distribution With no Replacement Bars AvailableThe Curt spring bars you mentioned won't fit a Pro Series weight distribution hitch as they are not designed to fit that head unit so they won't work. There are no longer Pro Series replacement bars available as they stopped making that version of hitch, so the only option available is a new system. Since you mentioned you had 1,000 lb spring bars you can use a similar Curt system: - Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW # C17052 This is the most...
view full answer... - Selecting Weight Distribution/Sway Control Hitch for Travel Trailer with 300-Lbs Tongue WeightA trailer weight distribution hitch can include sway control, sway prevention, or neither. The Curt system # C17052 does not address sway. Simple friction-style anti-sway bars like # 83660 are also available as stand-alone products or they can added to a WD system but their performance does not compare to integrated setups that do both. The most effective sway solution comes from using a weight distribution system that incorporates built-in sway prevention, such as one of the Equal-I-zer...
view full answer... - Selecting Weight Distribution System for Use with Trailer Towed by 2011 Cadillac EscaladeTo ensure you can use a weight distribution hitch system on your 2011 Cadillac Escalade you'll just want to check the sticker on the vehicle's hitch. Look for a weight rating for weight distribution (or "WD") on the hitch's sticker. The hitch must be a 2-inch size that has a specific rating for use with WD systems. The real matching of the WD system relates to the trailer. The WD system needs to be selected based on the actual total tongue weight (TW) of the trailer when it is fully loaded....
view full answer... - Do Chain Hangers Require Trailer Frame Drilling for Curt MV Weight Distribution SystemThe chain lift brackets that come with the Curt MV Weight Distribution System # C17052 have a single 1/2" bolt that is used to secure the bracket to your trailer frame. The instructions call out to turn the bolt until it makes contact with your trailer tongue and then tighten it another 1/4 turn. The only time you would have to drill into your frame for a kit like this is if you didn't have the room for the standard lift brackets and you needed to install the brackets # C17005.
view full answer...
Do you have a question about this Weight Distribution Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Edited by:
Lindsey S
Video by:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Updated by:
Kathleen M
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Mike S
Updated by:
Isabelle B
Installed by:
Cole B
Installed by:
Michael B
Written by:
Chelsea B
Test Fit:
Ryan G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Bryant
1/31/2024
Its been great using this for the year. One link on the chains has rusted a bit is the only thing but not an issue.