Is 10k Curt MV Weight Distribution Too Wide For V-Nose Trailer

Question

Question:

I am buying a 2018 Legend 7x17x2 vnose enclosed trailer. the frame seems very narrow. is this too wide for that trailer? I am pulling it with a 2022 Honda Passport. Will this work for me?

asked by: Paul G

0

Expert Reply:

The 10,000 lb Curt MV Weight Distribution System # C17052 isn't too wide for your trailer but it may be too long. A lot of times with V-nose trailers what ends up happening is you have to install Chain Hangers for Curt Weight Distribution Systems - Bolt On # C17005 on your trailer frame.

The arms of the # C17052 are 31-1/2" long so you'll need about that much distance on your frame rearwards to use the system, otherwise you'll need to use the chain hangers.

Then for a hitch ball use part # C40008.

expert reply by: Kyle S

0

Answer 1

With the design of your Legend Trailer V-Nose I recommend using the Tuson Asymmetric Sway Control #335TSC-1000. The positioning of the jack in combination with the trailers tongue are going to make it impossible to use a traditional weight…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Aesthetically, the Draw-Tite Max-Frame Trailer Hitch Receiver item #76290 is going to be the best hitch receiver for your 2022 Honda Passport. It features a hidden cross-tube that keeps the main support concealed behind your bumper trim. This leaves…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Is 10k Curt MV Weight Distribution Too Wide For V-Nose Trailer

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching