etrailer Ball Mount Kit for 2" Hitches - 3/4" Rise or 2" Drop - 7,500 lbs
(1311 reviews)
Price: $53.92
etrailer Ball Mount Kit for 2" Hitches - 3/4" Rise or 2" Drop - 7,500 lbs
Our Price: $53.92
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (1311)
- Q & A (0)
- Photos
etrailer Trailer Hitch Ball Mount
- Fits 2 Inch Hitch
- Fixed Ball Mount
- Drop - 2 Inch
- Rise - 1 Inch
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- 7500 lbs GTW
- Class III
- etrailer
- Ball Mount Kit
- Steel Shank - Gloss Black
- Steel Ball
Towing starter kit features 2 trailer hitch balls to fit different applications, ball mount with 3/4" rise or 2" drop, pin and clip, and a handy storage bag. Tow up to 7,500 lbs with the 2" ball or 2,000 lbs with the 1-7/8" ball.
Features:
- Ball mount and hitch balls let you hook up your trailer to your tow vehicle
- Hollow shank slides into hitch receiver
- Balls provide connection points for your trailer coupler
- 2 Different-size hitch balls let you tow trailers with different coupler sizes
- Included pin and clip secure ball mount in hitch receiver
- Included storage bag stores ball mounts or drawbars when not in use
Specs:
- Application: 2" x 2" trailer hitch receivers
- 1-7/8" Ball (19260)
- Gross towing weight: 2,000 lbs
- Tongue weight: 200 lbs
- Shank diameter: 1"
- Shank length: 2-1/8"
- 2" Ball (63845)
- Gross towing weight: 7,500 lbs
- Tongue weight: 750 lbs
- Shank diameter: 1"
- Shank length: 2-1/8"
- Ball mount (2923)
- Rise: 3/4"
- Drop: 2"
- Measurement from center of pin hole to center of ball hole: 8-1/2"
- Pin and clip (PC3)
- Diameter: 5/8"
- Length: 5-1/8" straight from end to end
- Storage bag (ETBMB)
- Dimensions: 16-1/4" long x 5-1/4" tall x 4" wide
63816 Tow Ready 1-7/8" Hitch Ball and Medium Shank - Chrome - 2,000 lbs GTW (19260)
63845 Tow Ready Trailer Hitch Ball (Replaces 19247)
ETBMB etrailer Ball Mount Bag
2923PC Ball Mount 3/4" Rise or 2" Drop, 7,500 lbs - Pin and Clip Included
Item # 989891
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- etrailer mistake
Customer Reviews
etrailer Ball Mount Kit for 2" Hitches - 3/4" Rise or 2" Drop - 7,500 lbs - 989891
Average Customer Rating: 4.8 out of 5 stars (1311 Customer Reviews)
Towing starter kit features 2 trailer hitch balls to fit different applications, ball mount with 3/4" rise or 2" drop, pin and clip, and a handy storage bag. Tow up to 7,500 lbs with the 2" ball or 2,000 lbs with the 1-7/8" ball.by: Frank W.03/02/2021
Thank you etrailer for the quality products I received early last year. We needed a trailer hitch to install on our Subaru Forester for our move from Gig Harbor, WA to Spokane. We received the hitch hardware including the tow bar and electrical harness. The entire process took 4 hours. The installation process went off without a hitch (bun intended) using detailed videos I found online.
Thank you etrailer.
by: Brian11/17/2023
Didn't receive the storage case for hit ch
by: Andrew04/10/2021
I must say I like having my etrailer equipment installation was easy. But I really wish I had installed the factory hitch. Only because the provisions for mounting the wire harness is much much better. etrailer IS GREAT WITH ALL THAT THEY DO
by: Kenny07/02/2020
I put it on in about 15 minutes by myself. Had to take spare off to tighten 2 bolts. Fit like a glove. This is the 2nd hitch I’ve gotten from etrailer and both have been so easy to put on. I can’t wait to tow my kayak trailer to the lake.
by: Luis07/04/2022
High quality fabrication,but the fitment on the hitch was a little loose. I expect this to make some noise when stopping and starting with your trailer. I'm a rookie but this appears obvious to me. Not sure if other products will fit better to avoid that.
by: Gabriel 04/13/2021
I bought it a years ago and it has been a great hitch ball set. Easy on and off - I use a locking pin instead of the provided one, just for security - but I've had no issues. No rust, no deep scratches. I love the provided bag too. I keep all my towing gear in it, and toss it in the cargo well. Great product!
by: Randy S.06/12/2016
it was great to know when the package of items was supposed arrive, and better yet that everything did show up on time. The frame hitch came with good instructions and I was able to install it alone without any surprises, everything fit well together. The same was true with the wiring harness for the trailer lights as well. I will look to etrailer.com for my future needs.
by: Charlie in NC07/22/2019
My etrailer e989891 ball mount kit is exactly what I need for multiple towing jobs. It fits well with my etrailer e98871 hitch receiver on 2015 Ford F150. Quality is excellent and I appreciate the quick shipping.
by: Paul I06/08/2017
Cant really say much about the product. Its a ball mount. It looks good. Seemed like a good price. Made in China. No cotter pin holes on the ball shanks, so I guess they expect the big lock washer to keep it in place.
The etrailer service was excellent. Shipped out next day and I received it a couple of days later.
by: Antonio03/07/2022
Exactly what you would expect of a Hitch and Ball mount. I have really appreciated that I have not had to think about this product at all when towing. I know that I can trust this product and the build quality, which makes for a much better trip.
by: Martin S.05/09/2015
Great internet page with everything you need to know before buying! Bought hitch+tongue+ball+wiring connection. Great products, great price, realy fast shipping!
Would buy anytime again!!
by: John 05/15/2021
A fine package. The zippered pouch/bag is very useful, and the hitch does exactly what hitches are supposed to do.
by: Garret02/09/2019
It is a hitch ball and bracket, good quality for price. I like that it has a bag to keep it all together, but it’s not high quality so we’ll see how it lasts.
by: Mark09/28/2019
Love the carry bag as we tow with my wife's car and she did not want a greasy ball hanging around the cargo area of her trunk.
by: William10/04/2018
The finish on all the parts was top notch. I took a course in welding and I'm a pretty good judge of quality welding and these accessories were very good. The storage pouch makes keeping up with everything a lot easier.
by: Merle 08/13/2022
Received my parts the next day- WOW!!! Already installed and used. Thank you E TRAILER for the fast and efficient service!!!!
by: Chris10/02/2019
Great price for what it is. Very easy to install on your back in the driveway with two sets of hands. The installation video was very helpful as well.
by: Keith 07/30/2021
Etrailer did it again. Fast reliable shipping and as always the right part as ordered. Thanks
by: BecInOhio12/09/2020
Fit my 2020 Toyota Tacoma without any issues. Love the storage bag for keeping everything together in one place when not in use.
by: Michael06/01/2018
Great starter kit!
by: Len06/24/2017
Exactly what I needed for my new Ford Explorer. Great product and fast shipping. The bag keeps it from rattling around in the storage compartment.
by: Andrew A08/08/2018
Super quality, exactly what I needed, covers any trailer I can possibly haul.
by: Joshua 06/18/2021
This kit worked great for the application I needed it for!
25
1309
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch Ball Mount
- What is the Hitch Ball Size of a 2000 Coleman Sea Pine Pop-Up CamperI do not know for certain but my guess is that their 2000 Coleman Sea Pine Pop-Up Camper uses a 2" hitch ball. If you have access to the trailer then you can look at the top of the coupler as this will tell you what size hitch ball to use. The other option is a 1-7/8" hitch ball but again, there is no way to know for certain without looking at the trailer coupler. Depending on the rise/drop you need (see article) you could use the Ball Mount Kit part # 989891 which comes with both a 1-7/8"...
view full answer... - Picking Out Ball Mount for Truck Hauling Rental TrailerIf you want to make this as inexpensive as possible I would recommend calling the trailer rental place and first seeing if they have a ball mount they could just let you borrow when you rent the trailer as that is pretty common. Next option would be then to ask them what the distance is from the bottom of the coupler lip on their rental trailer down to the ground and compare that to the distance from the top of the hitch opening down to the ground. That difference would be the amount of...
view full answer... - Availability of a 2 Inch Ball Mount with a 1 Inch DropI do have a ball mount that will work for you but none of our ball mounts have exactly a 1" drop. However, a ball mount with a 2" drop will more than likely work for you as when you measure from the ground to the bottom of your trailer coupler while level in comparison to the distance from the ground to the top of the inside edge on your trailer receivers tube opening, the tongue weight of the trailer will then need to be applied to the vehicle which is raley taken into consideration. Depending...
view full answer... - Difference Between etrailer Ball Mount Kit # 989891 and # 989899The difference between the two ball mount kits # 989891 and # 989899 is just that the # 989899 comes with two of the ball mounts that comes with the # 989891 and an additional hitch pin and clip.
view full answer... - 2015 Jeep Grand Cherokee Limited 6 Cylinder Receiver Hitch and Wiring HarnessYes, the Draw-Tite Max-Frame hitch receiver item # 75699 is a confirmed fit for your 2015 Jeep Grand Cherokee Limited 6 cylinder. The prices for each can be found on the product pages. The only models that that specific hitch does not fit are the SRT-8 and EcoDiesel SRT-8. I recommend the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118727. It plugs into the Jeep's wiring adapters behind each tail light. I've linked an install video for you. I also recommend...
view full answer... - Is etrailer Ball Mount Kit 989891 Matte Black Like Trailer Hitch e98850 The etrailer Ball Mount Kit for 2" Hitches # 989891 does not have the same matte black powder coat finish as the etrailer Trailer Hitch Receiver # e98850. The ball mount is a bit glossier so they aren't a perfect match but it will be pretty difficult to tell the hitch and ball mount apart unless someone is really trying to find a difference. The ball mount kit is an exceptional value because it includes a ball mount with 3/4" rise or 2" drop, a pair of hitch balls (2" and 1-7/8"), a pin...
view full answer...
- etrailer.com Ball Mount Kit Compatibility with Draw-Tite Class III Trailer Hitch on a 2006 BMW X5The etrailer.com ball mount kit you referred to would likely be a great choice. Its compatibility would depend largely on the height of your trailer coupler when the trailer is level. You'll want to choose a ball mount with the proper height so the trailer is sitting level. To determine the correct height ball mount you'll need you'll need to measure the heights of the hitch and the coupler, then determine the height difference. The height difference will equal the rise or the drop you'll...
view full answer... - Trailer Hitch for 2019 Subaru Outback with Rear Sensors on BumperI recommend going with the Draw-Tite # 76227 . This hitch has a 2" receiver that won't interfere with the backup sensors on your bumper. This hitch has a 600-lb TW / 4000-lb towing capacity to maximize the towing capabilities of your 2019 Subaru Outback wagon. I really like that this hitch has the concealed cross-tube design so that it has a virtually invisible footprint on your vehicle- very similar to the EcoHitch, but at a much better price point. You're going to have to remove the...
view full answer... - Recommended Trailer Hitch for a 2013 Ford Escape SE for use with a Hitch Bike RackNo drilling is necessary or trimming fascia on the Draw-Tite # 75758, and the instructions will be included or you can view the instruction links. I included installation videos for the hitch on a 2013 Ford Escape. You may need to use a burr bit or file to enlarge the access hole if needed. It's very easy and take a look at the video for the 2015 Ford Escape at the 2 minute 12 second mark. The Draw-Tite Class-III trailer hitch # 75758 has a 525 pound tongue weight and 3,500 pound towing...
view full answer... - Recommended Trailer Hitch And Wiring For 2015 Jeep Grand CherokeeIf you are looking for a complete towing package for your 2015 Jeep Grand Cherokee, first I would start with the Draw-Tite Max-Frame Trailer Hitch Receiver # 75699 if you don't have the Diesel models. This hitch is a fully welded vehicle trailer hitch is strong and durable. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. The combination of an e-coat base and a powder coat finish provides excellent rust protection. There is no drilling required for...
view full answer... - Does Installing the Draw-Tite 75586 on a 2013 Toyota Highlander SE Require Mud Guard RemovalNo. Installing a hitch like the Draw-Tite # 75586 does not require the removal of the mud flaps on your 2013 Toyota Highlander SE. This hitch installs without any drilling required but trimming or removal of underbody panel may be required for installation. If you're going to be towing with this hitch you'll also need a wiring harness, ball mount, hitch ball, hitch pin and clip. For wiring, I recommend using the Tekonsha T-One # 118449 because of the reliability of the powered converters...
view full answer... - Towing Capacity for 2011 Subaru Forester With Draw-Tite Trailer Hitch ReceiverI checked the owner's manual in regards to the towing capacity of your 2011 Subaru Forester, and it states that the maximum towing capacity is 1,000 lbs if the trailer does not have brakes or 2,400 lbs if the trailer does have brakes. So that is the maximum you can tow with your Forester and the Draw-Tite Trailer Hitch Receiver # 75650. Even though this hitch has a 4,000 lb capacity, you have to abide by the lowest-rated capacity when towing so either 1,000 lbs or 2,400 lbs depending on...
view full answer... - Does Curt 2" Trailer Hitch Fit With Stow&Go Seats on a 2010 Chrysler Town and CountryYes, the Curt Trailer Hitch Receiver # 13364 will still fit a 2010 Chrysler Town and Country even if it has the Stow&Go seats. We actually had the chance to install this hitch on the exact same style that you're talking about and I've attached an installation video for you to check out. A lot of people get a hitch installed on a Town and Country to haul smaller trailers. If this is you then you'll also need the wiring kit # 118552 and a ball mount kit like part # 989891 which includes...
view full answer... - Does Curt Hitch for 2014 Nissan Murano Come with Wiring and Can it be Installed Without a LiftGreat questions! The Curt Trailer Hitch Receiver # 13577 just comes with the hitch itself. To add the corresponding wiring for your 2014 Nissan Murano SL you'll need the Curt # 55571 as well. I have attached installation videos for each that you can check out. As far as installing it without a lift goes, I sifted through the reviews on this hitch and it seems like other people were able to install it fairly easily without using a lift; some people even said they didn't need to lower the...
view full answer...
- Recommended Trailer Hitch For 2017 Highlander XLE HybridYes, the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98844 is confirmed to fit the 2017 Toyota Highlander All Models. This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant and an attractive matte black finish which goes great with the Highlander's aesthetics. For custom wiring # 118449 is recommended. For ball mount, hitch ball, pin and clip # 989891....
view full answer... - Best 4-way Flat Wiring for a 2022 Hyundai PalisadeThe 4-way wiring harness that I recommend for your 2022 Hyundai Palisade is going to be the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # CU94FR. This is going to be one of the easier installations. The T-Connector plugs into your vehicle's wiring harness, which is located behind the driver's-side interior trim panel in your rear cargo area. Once installation is complete, the 4-way flat connector will be stowed in an out-of-the-way location within your cargo...
view full answer... - Recommended Trailer Towing Package for a 2014 Chevrolet Captiva SportFor a 2014 Chevrolet Captiva Sport, I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75556. The Draw-Tite Max-Frame is a Class III trailer hitch with a 2" receiver tube opening. The hitch is rated for 400 lbs tongue weight (TW) and 4,000 lbs gross trailer weight (GTW). I have attached a review video of this hitch installed on a similar 2013 Chevrolet Captiva Sport for you as well. For a trailer wiring harness, I recommend using the Hopkins Plug-In Simple Vehicle Wiring...
view full answer... - Will Draw-Tite Hitch Fit 2020 BMW X5 sDrive 40iYes, the Draw-Tite Max-Frame Trailer Hitch Receiver # 76288 will fit your 2020 BMW X5 sDrive 40i. The reason why we specify "excluding M performance models" is because that option has a different trim package so it changes out the hitch interacts with the vehicle body. The sDrive has the same trim style as the xDrive which this hitch was installed on in the linked instructions (see attached). If you're looking to use this for towing a trailer then you also need a wiring kit and a ball...
view full answer...
- Recommendation For Wire Harness For 2012 Toyota RAV4The etrailer Class III Receiver Hitch, Item # e98864, is a confirmed fit for your 2012 Toyota RAV4 but wiring is not included. The etrailer hitch has a 2 inch hitch opening, a 3,500 lb total weight capacity, and a 525 lb tongue weight capacity. It has an easy, bolt-on installation and all the installation hardware is included. For a wiring harness, I recommend the T-One Vehicle Wiring Harness, Item # 118412, which is a confirmed fit for your RAV4. If you need a ball mount and hitch ball,...
view full answer... - Best Hitch For a 2021 Honda CR-VThe hitch that I recommend for your 2021 Honda CR-V is the etrailer Trailer Hitch Receiver # e98848. This hitch will work with hybrid, non hybrid and touring models of the CR-V. It has a 2" receiver opening which is the most common size used for accessories such as bike racks, cargo carriers and ball mounts for towing a trailer. This hitch features a no drill installation and nice matte black finish that will help to hide any scratches. If you plan to do any towing and do not have a wiring...
view full answer... - Curt Hitch For 2014 Acura MDX For Bike Rack & Trailer TowingI can help you out with hitch for your 2014 Acura MDX, the Curt Trailer Hitch Receiver # C13146 is a great choice. The Curt is going to offer your '14 MDX great bumper and ground clearance; when we test fit this hitch on a 2014 Acura MDX we found it was about 2-3/4 inches from the hitch pin hole to the edge of the bumper, and 14 inches from the top of the hitch to the ground. That will give you really nice clearances to keep your bikes away from the back of your Acura as well as help...
view full answer... - Trailer Wiring Recommendation for a 2022 Toyota SiennaI have the perfect solution for you with the Tekonsha T-One # TK69FR! This connects to the OEM plug on your 2022 Toyota Sienna and gives you the basic trailer lighting functions that you'll need to tow a small trailer. If you don't already have a ball mount/hitch ball kit then I recommend checking out the etrailer Ball Mount Kit # 989891 which comes with a ball mount and a few hitch ball options to fit your towing needs. Attached are some review videos for you to check out.
view full answer... - Availability Of Ball Mount That Is Straight And Has A Single 1-7/8 Hitch BallIt sounds like you are looking for something similar to the Buyers Products Tri-Ball Hitch - Tubular Shank with Chrome Balls # 3371802207 that only has a 1-7/8" diameter hitch ball. The closest option we have to this is the etrailer Ball Mount Kit # 989891 which includes a ball mount that measure 8-1/2" from the center of the hitch pin hole to the center of the hitch ball hole, and is right around 12" long overall. Now this ball mount does not have 0" rise/drop, but has a 3/4" rise which...
view full answer... - Hitch for 2012 MB Sprinter 3500 with 170 Extended WheelbaseThe Draw-Tite Max-Frame Trailer Hitch Receiver # 75549 fits a 2012 Mercedes-Benz Sprinter 3500 with the 170" wheelbase (and standard bumper) and as long as it does not have the 30-3/8" frame, measured outside to outside of frame. If you have the factory step bumper then you need the Draw-Tite Max-Frame Trailer Hitch Receiver # 75601 instead which has the same criteria for fitment. If you're looking to tow with the Sprinter then you need the T-One Wiring Kit # 118650 and a ball mount kit...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Installed by:
Jeff D
Installed by:
Randy B
Expert Research:
Jameson C
Written by:
Laura H
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Mike S
Video by:
Zach D
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Sierra K.
7/6/2022
Some ball mounts are looser than others. You can try an anti-rattle device like item # 63232 to keep the ball mount from being too noisy.
Helpful Links
Trailer-Hitch-LockLets-Go-Aero63232.html