Is etrailer Ball Mount Kit 989891 Matte Black Like Trailer Hitch e98850

Question

Question:

Is the etrailer ball mount matte black like the hitch mount?

asked by: Ben

0

Expert Reply:

The etrailer Ball Mount Kit for 2" Hitches # 989891 does not have the same matte black powder coat finish as the etrailer Trailer Hitch Receiver # e98850.

The ball mount is a bit glossier so they aren't a perfect match but it will be pretty difficult to tell the hitch and ball mount apart unless someone is really trying to find a difference.

The ball mount kit is an exceptional value because it includes a ball mount with 3/4" rise or 2" drop, a pair of hitch balls (2" and 1-7/8"), a pin and clip and a storage bag. I have added a link to a video review of the Ball Mount Kit # 989891 as well as a link to an install of the etrailer Trailer Hitch Receiver # e98850.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Some 5-Pole flat connectors use a total of 6 wires. They operate as follows: Blue - trailer brakes Green - right hand brake and turn signals Yellow - left hand brake and turn signals Brown/Green - right hand running lights Brown/Yellow - left hand…

view full answer...

Answer 2

On a 5-Way trailer connector, usually found on boat trailers, the pin on the end furthest from the ground pin is used on an electric reverse lockout on the trailer coupler. This is so when you put the vehicle in reverse, it will single a solenoid…

view full answer...

Answer 3

If the plug you have on your 2008 Toyota Tacoma is the US Car Connector like the Curt #C56229 then you can simply use the Curt T-Connector #C55774 or the Hopkins #HM40975 to add 4-Way and 7-Way connectors to your vehicle. This is much more…

view full answer...

Answer 4

I do have a few different wiring options available for your 2008 Toyota Tacoma, depending on what is already installed on the truck. If your Tacoma happened to come with a factory 7-Way wiring harness, there is not a replacement 7-Way currently…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Is etrailer Ball Mount Kit 989891 Matte Black Like Trailer Hitch e98850

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching