Replacement Shank for Gen-Y Adjustable Ball Mount - 2" Hitch - 5" Drop/Rise - 10K

See what our Experts say about this Gen-Y Hitch Accessories and Parts

• Distance from Hitch Pin Hole to Edge of Arms on Swagman Trailhead 4 Bike Rack
  From the center of the hitch pin hole to the furthest edge of the arms on the Swagman Trailhead 4 Bike Rack # S63380 measures 38-1/2". The only thing that you're missing is that most dual hitch adapters will reduce the weight rating by 50% and then any hitch extender has a 50% weight reduction as well. To keep your trailer hitch weight rating the highest it can be I recommend using a Gen-Y Hitch like part # 325-GH-303 as the dual hitch adapter because it is built in such a way that Gen-Y...
  view full answer...
• High-Low Adapter Needed for Flat Towing a 2008 Jeep Wrangler Sahara
  Since you can use different brand high-low adapters with any tow bar we actually have flat towing high-low adapters that will work for your situation. Unfortunately none of our dual adapters have the weight capacity to accomplish this. Attached is a link to our selection of high-low adapters that you can filter through. These range from a 2" rise/drop # RM-072-2 all the way to a 10-1/4" rise/drop # RM-048-10. If you're looking for an option with about a 7" drop like what the Malone # RM-048-10...
  view full answer...
• Recommended Hitch for 2021 Toyota RAV4 Carrying Yakima HangOver Bike Rack
  For a trailer hitch receiver that will give you enough clearance on your 2021 Toyota RAV4 I recommend the etrailer Trailer Hitch Receiver # e23ZR. This is a Class III hitch with a 2" receiver. The distance from the ground to the top of the receiver opening is 12-1/4" so it will give you just enough ground clearance for your Yakima HangOver Bike Rack # Y02484. If you would like to have additional clearance it is possible but you would not want to use an adapter that reduces the hitch capacity...
  view full answer...
• How To Lower Bike Rack Connection Without Reducing Weight Capacity
  I do have an option for you to drop the connection point with the bike rack and that is with the Shank for Gen-Y Adjustable Ball Mount part # 325-GH-303. This is one of the only options that won't reduce weight capacity and it can be used for towing a well with the Replacement 2-Ball Mount part # 325-GH-031 if need be. The Roadmaster High-Low Adapter part # RM-048-4 is a more cost effective option but will reduce the weight capacity of the hitch by 50% or 400 lb, whichever is lower.
  view full answer...
• Can Roadmaster Dual Hitch Receiver Adapter be Used for Towing and a Bike Rack
  You are on the right track of thinking, but the Roadmaster Dual Hitch Receiver Adapter # RM-077-8 actually isn't rated for towing a trailer so we need to look at a slightly different with the Gen-Y Hitches. For your application you could probably use part # 325-GH-303 or # 325-GH-304 as these are somewhat similar to the Roadmaster that you were previously looking at and they are definitely rated for towing and utilizing your bike rack. When it comes to the correct height of your ball mount...
  view full answer...
• Can Blue Ox High-Low Adapter for Tow Bars Be Used to Tow a Trailer
  The Blue Ox High-Low Adapter for Tow Bars # BX88235 is designed for lateral pulling like what we see with a flat-tow setup since the towed vehicle is supported on all 4 wheels. For your application I recommend using the Replacement Shank for Gen-Y Adjustable Ball Mount # 325-GH-303 which offers the same rise/drop the Blue Ox does but this is more of a heavy duty piece that can be used for towing a trailer. Attached is a review video for you to check out.
  view full answer...
• Recommended Gen-Y Hitch for 2019 Chevy Silverado 2500 and Trailer with DO45 Coupling
  It looks like the pin part of the DO45 (which takes the place of a standard hitch ball) has a shank with a 1-1/4" diameter so I recommend using the Curt Heavy Duty Forged Ball Mount # C45340 with a Gen-Y hitch as this ball mount has up to a 17K towing capacity. For the Gen-Y hitch it all depends on the height of the trailer and if your 2019 Chevy Silverado 2500 is stock height or not. If your Chevy is stock height then you should be just fine with the Gen-Y Shank # 325-GH-303 which gives...
  view full answer...
• Roadmaster Dual Hitch Receiver Adapter Capacity
  The Roadmaster Dual Hitch Receiver Adapter # RM-077-2 has a gross towing weight of 10,000 lbs and tongue weight of 400 lbs. This is intended for flat towing, otherwise the adapter will reduce your hitch capacity by 50%. Since you're using a winch I recommend the Replacement Shank for Gen-Y Adjustable Ball Mount # 325-GH-303 instead. This will have no impact on your hitch capacity and has a 10,000 lb gross towing weight with a 1,500 lb max tongue weight capacity. If you need an even higher...
  view full answer...
• Gen Y Replacement Shank on 2021 GMC Sierra 1500 Towing Travel Trailer
  The Replacement Shank for Gen-Y Adjustable Ball Mount # 325-GH-303 is a great option for lowering the ball mount for your 2021 GMC Sierra 1500. This shank is rated for 10,000lbs which is well below the 6,000lbs of your travel trailer. The one thing that I want you to consider is you said you have a 5" Lift. Does that include or exclude any larger tires that may have also been installed. If it doesn't include the tires you might want to consider the Replacement Shank for Gen-Y Adjustable...
  view full answer...
• Drop Shank Adapter For Carrying A Black Widow Motorcycle Carrier Lower On Vehicle For Easier Loading
  I have a recommendation as the Roadmaster High Low Adapter # RM-058-4 is only designed to be used with tow bars and not a motorcycle carrier. The Replacement Shank for Gen-Y Adjustable Ball Mount # 325-GH-303 gives you 3 stacked receivers. This will give you different options on how much you want to lower your carrier. You can place it level with your receiver, 2-1/2" or 5" of drop. This adapter allows for 1,500lbs of tongue weight and will be able to handle your Black Widow motorcycle...
  view full answer...
  
• Towing Capacity on Gen-Y Replacement Shank
  Not only does the Gen-Y Replacement Shank # 325-GH-303 have the 10,000-lbs capacity (1500-lbs tongue weight) that you're looking for, it will provide you with a 5" rise or drop, depending on how you decide to use it. This hitch will work with your existing ball mount and give you 7-1/8" of clearance from the center of the hitch pin on the shank to the center of the hitch pin for the ball mount.
  view full answer...
  
• Dual Hitch Receiver for Use with Tow Dolly
  I do have an option for you but they do not make the Curt Multipurpose Ball Mount part # D210 with a 4" drop. Instead, I recommend taking a look at the Shank for Gen-Y Adjustable Ball Mount part # 325-GH-303 which can be used as a dual hitch receiver and will allow for you to obtain either a 5" rise/drop, 2-1/2" rise/drop, or 0" rise/drop. We do not have any dual hitch receivers that can be used for a tow dolly and will allow for a 4" drop.
  view full answer...
• Hitch Adapter for Flat Towing Vehicle and Bike Rack Behind RV
  There are some great options out there for towing a vehicle behind your RV along with a bike rack, and you are heading in the right direction. You are correct that Roadmaster does not make any dual hitch adapters that allow you to use your tow bar in-line with the hitch receiver. The best option available is the Gen-Y # 325-GH-303, which is a more economical alternative to the # 325-GH-314 adapter you were looking at. It also has the same 10,000 lb gross towing weight and 1,500 lb tongue...
  view full answer...
• Ball Mount Needed with Longer Shank for Use with a Ford E-350
  I do have a solution for you but all of our other long shank ball mounts are shorter than the Curt # C45900 that you currently have. You could use a Gen-Y shank like part # 325-GH-303 for a 5" rise/drop or part # 325-GH-304 for a 7-1/2" rise/drop along with the Gen-Y Tri-Ball Mount # 325-GH-034 which comes with 1-7/8", 2", and 2-5/16" hitch balls and has a 12" long shank. Another option is to use a fixed ball mount with a long shank like the Brophy # EA40 with a hitch ball like the 2"...
  view full answer...
• Aluminum Cargo Carrier Recommendation for a 2020 Dodge Grand Caravan
  Thanks for reaching out, J! I recommend checking out the Flint Hill Goods 22" x 49" Cargo Carrier # FHG27ZR which is has the dimensions and aluminum constructions you're looking for, but it does have a straight shank. If you're needing a rise, the best option is to use something like the Gen-Y Shank # 325-GH-303 or Yakima BackSwing # Y02483. I personally like the BackSwing better because it gives you the ability to move the carrier entirely out of the way without unloading it, but the...
  view full answer...
• Dual Receiver Recommendation for Towing Car and Using Bike Rack Simultaneously
  The Roadmaster Dual Hitch Receiver Adapter, 8" Drop/Rise # RM-077-8 does have the 2 inch receiver like a Class III hitch on both openings but the Roadmaster adapters have a rounded shape to the inside of them to help be a tighter fit on accessories and the shank of your Swagman bike rack, # S64663, is extremely square and won't fit into Roadmaster adapters. Instead you can use the Replacement Shank for Gen-Y Adjustable Ball Mount - 2" Hitch - 5" Drop/Rise - 10K # 325-GH-303 or 7-1/2" #...
  view full answer...
• Dual Hitch Adapter for Bike Rack With E-Bikes on 2019 Ram 1500 Classic Towing 2024 Aliner Classic
  I would say throw a hitch on the trailer and then add the bike rack but none of the racks with a high enough capacity are rated for a travel trailer. For a hitch adapter I recommend using the Gen-Y stacked receivers like the # 325-GH-305. Unlike normal adapters this will not cut your hitch capacity in half. It also gives you good options for rise to clear your trailer jack and propane. I'm not totally sure what clearance you need without trying it or taking measurements but I can help...
  view full answer...
• How To Safely Haul Bikes While Hauling My Trailer Without Roof Rack On My 2020 Subaru Outback
  Getting a dual hitch converter will pose some issues with towing. Whenever using an extension of any kind, you will reduce the capacity of the hitch by 50 percent. This isn't something you will want if you plan on hauling your trailer with your 2020 Subaru Outback. There are some other options you can use, but this will depend on your trailer. You can use the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers # CC-275. I've included a video to show you how...
  view full answer...
• How Can I Haul My Trailer And Bikes At The Same Time?
  Getting a dual hitch converter will pose some issues with towing. Whenever using an extension of any kind, you will reduce the capacity of the hitch by 50 percent. This isn't something you will want if you plan on hauling your trailer with your 2020 Subaru Outback. There are some other options you can use, but this will depend on your trailer. You can use the Stromberg Carlson Bike Bunk Trailer-Mounted Bike Rack Carrier for A-Frame Trailers # CC-275. I've included a video to show you...
  view full answer...
• Can You Use A Replacement Shank For Gen-Y Adjustable Ball Mount With A Reese WDS
  You can use the Replacement Shank for Gen-Y Adjustable Ball Mount # 325-GH-303 with the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion # FA92-00-0800 or the Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion # RP66558 you mention.
  view full answer...
• Recommended High-Low Hitch Receiver Adapter to Use with Thule EasyFold XT Bike Rack
  It's true that a high-low adapter, like the Roadmaster # RM-076, will help reduce the height of the Thule EasyFold XT # TH903202 but the problem you're then looking at is the weight capacity of your hitch receiver is cut in half so if you're weight capacity is 350 lbs of tongue weight it'll be reduced to 175 lbs. This is due to moving the weight further back from your hitch so it amplifies the weight (think of it like a seesaw). Gen-Y is the only high-low adapter system that doesn't have...
  view full answer...
• Recommended Stacked Receiver To Flat Tow A 2019 Ford Fusion And Carry An E-Bike With
  Because of the way the Blue Ox Avail Non-Binding Tow Bar # BX7420 folds up for storage you are going to have to remove your bike rack from the Replacement Shank for Gen-Y Adjustable Ball Mount # 325-GH-303 prior to folding up the tow bar. To completely clear the bike rack you would need too long of an extension to be safe flat towing your vehicle. While it's not as convenient I do recommend going with a stacked receiver and placing the bike rack in the highest receiver with your Avail...
  view full answer...
• Hitch Adapter Recommendation for Bike Rack on Lifted Vehicle
  For your application the best product to use is the Gen-Y Adjustable Ball Mount Shank - 2" Hitch - 5" Drop/Rise # 325-GH-303 because it will give you a much more solid connection than a Roadmaster high-low adapter would for your Thule EasyFold XT # TH903202. Since there will be an additional connection between the hitch receiver and bike rack it is imperative to make sure the Gen-Y sits stable in your Jeep hitch receiver. To help out with this I recommend picking up the etrailer Anti-Rattle...
  view full answer...
• 2" Hitch Adapter To Raise Cargo Carrier For Ground Clearance Without Reducing Capacity 2" Receiver
  You will need to use the Gen-Y Shank # 325-GH-303 to raise the height of your cargo carrier for your power chair. This shank will not reduce the receiver capacity by 50% like other hitch adapters.
  view full answer...

Do you have a question about this Accessories and Part?