Replacement Shank for Gen-Y Adjustable Ball Mount - 2" Hitch - 7-1/2" Drop/Rise - 16K

See what our Experts say about this Gen-Y Hitch Accessories and Parts

• Flat Towing Equipment Recommendations For A 2016 Jeep JKU Rubicon Hardrock Edition
  Yes, your 2016 Jeep JKU Rubicon Hardrock edition is able to be flat towed. you'll need to follow the listed instructions in the owner's manual to get your vehicle ready to be flat towed though. You'll need a tow bar, tow bar wiring kit, base plate, braking system, and safety cables. I have the following recommendations for you below: Tow Bar: Roadmaster Falcon 2 Tow Bar - Motorhome Mount - 2" Hitch - 6,000lbs Item # RM-520. This tow bar has a large hookup radius that makes connecting a...
  view full answer...
• Recommendation for Dual Hitch Bike Rack and Ball Mount Compatible with Heavy Trailer
  We have a solution for you but it isn't a dual receiver but rather a stacked receiver ball mount. This won't be an adapter so won't reduce the tongue weight capacity of your trailer hitch like the adapter you asked about. It will allow you to use the top receiver for your 4 Bike Thule Apex # TH9025XT as long as your loaded tongue weight is within the parameters of your trailer hitch. You can also use a weight distribution system if desired at the same time. My recommendation for you...
  view full answer...
• Solution for Using Rhino-Rack T-Load While Towing Jet Ski Trailer With 2022 Forester Wilderness
  In order to be able to tow your trailer while using your # RTL002 with your 2022 Subaru Forester I recommend the # 325-GH-503. The stacked receivers will let you install the T-Load first and then add the appropriate ball mount underneath with the rise you need for the trailer. This has a 5" rise with an overall height of 8". If by not enough clearance you meant you need 5" of clearance between the ball mount and the T-Load, the # 325-GH-504 would give you additional clearance. However,...
  view full answer...
• Can The Gen-Y Stacked Receivers Be Used To Carry A Bike Rack And Tow A Trailer
  What Gen-Y said is correct, and this is the best solution for a problem like yours. The Replacement Shank for Gen-Y Adjustable Ball Mount - 2" Hitch - 7-1/2" Drop/Rise - 16K # 325-GH-504 will not reduce your tongue weight capacity at all. It has a gross towing weight of 16,000 lbs and max tongue weight of 2,000 lbs. Keep in mind, you will be limited by the lowest capacity of your setup which is likely your vehicle or trailer hitch receiver. Also, you can use any of the Gen-Y stacked receivers...
  view full answer...
• How to Lower Ramp Cargo Carrier for Easier Loading Angle
  For your application I recommend checking out the Replacement Shank for Gen-Y Adjustable Ball Mount # 325-GH-504. This has a max rise/drop of 7-1/2" inches and is compatible with a 2" hitch receiver like what you have. I do recommend using the Gen-Y Anti-Rattle Clamp # GY88XR to help stabilize everything and then the InfiniteRule Hitch Lock # 34061072-D to secure your investment. Attached are some review videos for you to check out.
  view full answer...
• Is the MaxxTow Ball Mount With 2 Inch Accessory Receiver Offered With More Drop
  I do have an option for you but the MaxxTow Ball Mount w/ 2" Accessory Receiver part # MT70066 is not offered with a 6" drop. The only option we have that would allow you to mount a hitch ball that far below the receiver tube and then place a hitch mounted accessory above this would be with the Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers part # 325-GH-404 for 5" drop or part # 325-GH-504 for 7-1/2" drop. If you placed the 2-Ball Mount part # 325-GH-031 in the bottom receiver tube...
  view full answer...
• How to Flat Tow 2013 Kia Soul and Carry RV Rider Bike Rack at the Same Time
  I recommend checking out the Replacement Gen-Y Shank # 325-GH-504 for use while you're flat towing your 2013 Kia Soul and carrying your Hollywood Racks RV Rider Bike Rack # HLY64FR. This is a heavy duty high-low adjustment shank that you can utilize by flipping it upside down and using the lowest shank for your tow bar and the highest receiver for the bike rack. The only thing you'll need to check on your end is the turning clearance to make sure the bike rack doesn't hit for Kia Soul. Attached...
  view full answer...
• Can Gen-Y Phantom X Ball Mount Be Used For Carrying Bike Rack
  As long as you do not exceed the tongue weight capacity of the # GY87VR it could handle your bike and bike rack. This has a tongue weight capacity of 700 lbs so it won't be a problem. However, if you think you might tow your popup camper and also carry the bike rack I would get the Replacement Shank for Gen-Y Adjustable Ball Mount # 325-GH-504 or # 325-GH-305 instead. These are incredibly sturdy with a high capacity that can handle just about anything.
  view full answer...

Do you have a question about this Accessories and Part?