Wheel Masters Tire Pressure Valve Extenders - 90-Degree Bend - Front Wheels - Qty 2
(36 reviews)
Price: $12.25
In Stock
Wheel Masters Tire Pressure Valve Extenders - 90-Degree Bend - Front Wheels - Qty 2
Item # WM802990
Retail:$25.07
Our Price: $12.25
You Save: 51%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (36)
- Q & A (0)
- Photos
Wheel Masters Accessories and Parts - WM802990
- Tire Repair Tools
- Valve Extenders
- Angled Extender
- Wheel Masters
- Silver
These angled valve extenders make it easy to access the valve stems on your front tires. Each sturdy, nickel-plated brass tube is bent at a 90-degree angle and screws onto your existing valve stem. Includes 2 extenders with caps.
Features:
- Allows easy access the valve stems on your tires
- Threaded head on extender screws onto your existing valve stem
- 90-Degree bend places valve stem in easy-to-reach spot
- Corrosion-resistant nickel-plated brass construction is long-lasting
- Included endcap replaces your existing valve stem cover
- Recommended for use on metal valve stems only
- Made in the USA
Specs:
- Quantity: 2 valve extenders with caps
- 1-Year warranty
802990 90 Degree Angled Valve Stem Extenders by WheelMasters - Qty 2
Replaces RMT802990
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Wheel Masters Tire Pressure Valve Extenders - 90-Degree Bend - Front Wheels - Qty 2 - WM802990
Average Customer Rating: 4.8 out of 5 stars (36 Customer Reviews)
These angled valve extenders make it easy to access the valve stems on your front tires. Each sturdy, nickel-plated brass tube is bent at a 90-degree angle and screws onto your existing valve stem. Includes 2 extenders with caps.by: Ray 03/16/2023
Used in addition to the extenders to attach tire pressure sensors the inside duallies.
by: RobertB. 05/02/2019
I have 12" wide wheels, and this 90 degree extension makes it possible to get my tire inflator on the valve stem easily. they have never leaked or come loose.
by: Harley Man03/06/2017
Worked as intended.
Made airing up rear spoked tire on the harley easier. 80 spoke wheels generally have the valve stem in the center of the wheel making it nearly impossible to get a std. air chuck on.
Etrailer folks are extremely helpful and they keep you well informed on your orders.
So far the items i have bought from etrailer had prices much better than local sources.
by: Franklin L06/17/2019
Ordered product for use on my rear motorcycle tire. It is very hard to work with the straight valve stem. The 90% stem extension makes it sooo much easier to air up the tire. The extension is attractive being plated and appears and seems to be well made.
by: Terry01/06/2019
Sturdy, easy to install.
I wanted to add tire pressure sensors and these extenders made the job a cinch.
Telephone support is helpful, standard mail option is very slow.
by: Ed H.09/25/2020
Look good on the vehicle. They fit well and go on and off without too much trouble. Certainly meets my expectations
by: Rosser03/15/2021
Great Tire Valve Extenders for Motorcycle Wheels. Good price and fast shipping... Thank you...
by: Les S.05/15/2017
Fast, Reliable, Professional, and always in my budget. Second to none.
by: Rob P10/12/2015
these work great for the front tires, although not really needed, they did work fines.
by: William 04/16/2020
I received the items in a timely manner and they worked perfectly on my motorcycle.
by: Robert04/06/2022
did not work for me, need to return
Jenny N.
4/15/2022
I will have our Customer Service team reach out to you.
by: Steve 04/28/2021
They work great and we're easy to install. No problems at all and we live in a crummy weather state.
by: Jim B07/09/2020
Great product. Does not leak and fits p erfectly.
by: Kevin H01/06/2021
Just what I was looking for. Worked gre at
by: Lee08/08/2019
Strong, reasonable, and looks good.
by: Stephen10/24/2017
Great, all the way around
by: Mike07/30/2018
Great product with great service!
by: Tim M.06/30/2016
Received exactly what I ordered.
by: Keith06/29/2019
Thank you for offering such high quality products.
by: rob08/21/2014
a++++ would buy from again
by: Harold 03/08/2024
by: Paul03/27/2022
by: Erik04/06/2024
by: Captain 09/07/2020
by: William 09/17/2022
25
36
Show More Reviews
See what our Experts say about this Wheel Masters Accessories and Parts
- Recommended Valve Tire Stem Extenders For Easier Access To Add Air Or Check Air PressureSince steel valve stems are not very flexible, it can at times be difficult to add air or find the room for a tire gauge to be able to fit. I recommend adding an extension like part # WM802990. The extenders are made of nickel-plated brass and feature a 90 degree bend that allows easier access for adding air or using a tire gauge. For a valve extender with a 45 degree bend I recommend part # WM8029. Both of these extenders screw onto your existing valve stem.
view full answer... - Tire Valve Extension for Rear Dual Wheels on a Semi The Wheel Masters Tire Pressure Valve Extenders - Straight - 2" Long item # WM80292 can be used in any application where a straight 2-inch tire pressure valve extension is called for. These extenders are made of solid brass that is nickel plated for corrosion resistance. We also offer valve extenders in other lengths 4" item # WM80294, 3" item # WM80293, and the 90-degree extenders item # WM802990.
view full answer... - Recommended Valve Extender and Suspension Enhancement For 2018 Ram 3500 Dually 4x4 The Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88295 is the best choice in air bags to help stabilize your load. These air bags are going to reduce the strain on your rear suspension. They're going to help increase safety and compensate for uneven loads. They allow you to level your vehicle front to back and help maintain safe headlight aim, and they adjust independently for side to side leveling of off center loads, and it's really going to help improve steering and braking...
view full answer...
- Recommended Tire Pressure Valve Extenders For MotorhomeThe Wheel Masters Tire Pressure Valve Extenders - 90-Degree Bend - Front Wheels # WM802990 technically are designed for the front wheels, but there are several customers that left reviews stating that it worked on their rear wheels. It really just depends on the layout of your current valve stems and if it requires a bend at all. I recommend looking into Wheel Masters Tire Pressure Valve Extenders - 135-Degree Bend - Steel Rear Wheels # WM8029135 or Wheel Masters Tire Pressure Valve Extenders...
view full answer... - Installing the Wheel Masters WM8029180 on a Ford E450 Winnebago AspectIf it is a little too tight, there should be no issue installing the # WM802990 to get you more room. As these will be double stacked, for the lack of a better term, I do suggest using sealing tape or Loctite when connecting the # WM8029180 to the # WM802990.
view full answer... - 90 Degree Valve Stem Solution for Tuson Tire Pressure Monitor SystemI have a solution but we don't offer the Tuson tire pressure monitoring system # 335TPMS6WIVS with 90 degree valve stems so you'd need to use 90 degree adapters like the part # WM802990 and you'd be set.
view full answer... - Compatibility of Wheel Masters Airless Inflation Kit # WM80092 with Tire Pressure Monitoring SystemsAccording to my contact at Wheel Masters, the 80092 wouldn't be compatible with TPMS systems, because there's no air in the tube. Using a regular extension like # WM80292, # WM8029 or # WM802990 would be a better choice, as they're compatible with TPMS systems.
view full answer... - Recommended 90° Valve Extender and Inflation Hose Kit for a 2021 Freightliner S2RV ChassisI'm not seeing where it states you can't use the Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" # WM8001 with your 2021 Freightliner S2RV chassis, but in any case I'd just recommend using the Wheel Masters 2-Hose Inflation Kit # WM8002 with the Wheel Masters Tire Pressure Valve Extenders # WM802990. These hose inflators will work fine with your Freightliner S2RV chassis, measure 13" long, and the 90° extenders have an overall length of 1 1/2" with a 1" long bend. These sound like...
view full answer... - Dimensions of Wheel Masters Tire Pressure Valve ExtendersThe Wheel Masters Valve Extenders # WM802990 are approximately 1-1/2 inches from the Schrader valve to the center of the 90-degree bend. From the bend to the other end is approximately 1 inch.
view full answer...
- Short Valve Stem Extention For Ford E-450 Front Wheel Tire Pressure Monitoring SystemFor a short extention we have a few option for your Ford E-450 with different degree bends to suit your needs. Without knowing what system you have, I'll give you options for you to compare. The Wheel Masters Tire Pressure Valve Extenders - 45-Degree Bend - Front Wheels - Qty 2, # WM8029. Wheel Masters Tire Pressure Valve Extenders - 90-Degree Bend - Front Wheels - Qty 2, # WM802990. Wheel Masters Tire Pressure Valve Extenders - 135-Degree Bend - Steel Rear Wheels - Qty 2, # WM8029135 Finally,...
view full answer... - Recommended Valve Stem Extention for a Ford E-450 Class B Motorhome Yes, you can. The Wheel Masters Tire Pressure Valve Extenders item # WM8029 you were looking at will not affect your factory tpms. I have linked an installation and review video below. Here are some other options for valve extenders: Wheel Masters Tire Pressure Valve Extenders - 90-Degree Bend - Front Wheels - Qty 2, item # WM802990 Wheel Masters Tire Pressure Valve Extenders - 135-Degree Bend - Steel Rear Wheels - Qty 2 item # WM8029135 Finally, the Wheel Masters Tire Pressure Valve...
view full answer... - Are Wheel Masters Tire Pressure Valve Extenders WM80294 Suitable for Use on Dually WheelsWheel Masters Tire Pressure Valve Extenders # WM80294 can be used in any application where a straight 4-inch tire pressure valve extension is called for. These extenders are made of solid brass that is nickel plated for corrosion resistance. We also offer valve extenders in other lengths and with various degrees of bend, such as the 90-degree extenders # WM802990, and all can be seen on the linked page.
view full answer... - Availability Of Valve Stem Extensions For 2006 Dodge Sprinter 3500 With Dual Rear WheelsI would be happy to help! For your 2006 Dodge Sprinter 3500 DRW you will need the 4" extenders # WM80294 and the 90 degree extenders # WM802990 to get the 5" extension you are wanting with a 90 degree bend. We do not have anything that will secure these extenders to your wheels, so you will need to be a bit creative. Using a metal valve stem # AM20906 instead of rubber would be the best option for these extenders. For the outer wheels it really depends on how long of an extension you...
view full answer... - Can a Valve Extension be Added to a TrailAir Pin Box to Make it Easier to InflateYes, you could put a valve extender on your TrailAir pin box. The valve on the pin box is a standard Schrader valve so something like # WM802990 could work for you.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Leah B
Written by:
David L
Updated by:
Wilson B
Updated by:
Noah M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Rob P.
10/31/2016
items shipped very fast. works just fine. easy to air tires.